Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions

							111
Step 1
Select "HD_Viewer" from the start menu ("Start" – "All 
programs" – "Panasonic" – "HD_Viewer") or double-
click the HD_Viewer icon on the desktop.
Step 2
Click the [Open file] button.
  →  The "Open" window will be displayed.
Step 3
Select the downloaded image data file (filename.n3r).
	 •	 It	is	possible	to	select	two	files	or	more	(up	to	32	 files) by clicking the desired files while holding 
down the [Ctrl] key or the [Shift] key.
	 •	 To	play	audio	data,	the	image	data	file	"filename. n3r" and the audio data file "filename.n3a" are 
necessary to be saved in the same folder.
    Step 4
Click the [Open] button.
  →  The image data will be displayed. 
Step 5
Click	the	[PLAY]	button.	
When playback finishes, a black screen will be dis-
played and paused. 
Note:
	 •	 It	is	possible	to	open	an	image	file	(extension:	n3r)	 by dragging and dropping it onto the window of 
the viewer software. 
	 •	 When	two	files	or	more	are	selected,	it	is	possible	 to skip to play the previous/next file by clicking 
the [Previous file]/[Next file] buttons. 
	 •	 When	the	[Zoom	in]	button	is	clicked,	the	dis- played image will be enlarged two times.
	 •	 When	performance	of	the	PC	in	use	is	low,	images	 may not be played smoothly.
	 •	 It	is	possible	to	turn	on/off	audio	by	clicking	the	 [Speaker (audio on)] button and the [Speaker 
(audio off)] button.
	 •	 When	a	web	browser,	the	viewer	software	and	the	 HDD Viewer are running at the same time, audio 
may not be heard correctly. 
	 •	 Run	only	one	of	the	web	browser,	the	viewer	soft- ware and the HDD viewer software to play audio. 
	 •	 Images	may	sometimes	not	be	played	synchro- nized with audio. 
 
    
Play the downloaded recorded images
     
						

							112
Step 1
Start operation when playing images using the viewer 
software.
Step 2
Click the [PAUSE] button. 
    Step 3
Click the [SAVE] button. 
  →  The "Save As" window will be displayed.
Step 4
Enter the file name, and then select "JPEG (*.jpg)" for 
"Save as type".
Step 5
Designate the folder and click the [Save] button.
  →  The image will be saved. 
    
Save the displayed image
The currently displayed image can be saved on a PC as a JPEG file. 
    
Step 1
Start operation when playing images using the viewer 
software. 
    Step 2
Click the [PAUSE] button when the desired image is 
displayed. 
Step 3
Click the [PRINT] button.
When printing an image whose extension is "n3r", the 
time and date when paused using the viewer software 
will be printed. 
    
Print the displayed image
The image paused using the viewer software can be printed.
     
						

							113
Step 1
Launch the viewer software and display the following 
window.
Step 2
Click the [Open file] button.
 →  The "Open file" window will be displayed.
Step 3
Select the downloaded image data file (filename.n3r).
    Step 4
Click the [Open] button.
  →  The first frame of the image data will be displayed 
and paused. 
Step 5
Click the [ALT CHECK] button.
  →  The alteration detection will start.
The [ALT CHECK] button will be displayed only when 
the image data with the alteration detection code is 
displayed. 
[OK (Not Altered)]: No alteration was detected.
[NG (Altered)]: Alteration was detected.
Alteration detection
It is possible to detect the alteration of the data if a code for the al\
teration detection has been attached to the 
downloaded data. Refer to the Installation Guide for how to attach the a\
lteration detection code to data. 
     
						

							114
Operate the camera
It is possible to operate the following camera operations when displayin\
g live images from a combination cam-
era. 
Panning/Tilting: Adjust the horizontal/vertical position of images from the camera. 
Zoom:  Zoom in/out images from the camera 
Focus:  Adjust the focus of the camera. 
Iris:  Adjust the lens iris of the camera
Preset position function:    Register preset positions and move the camera direction to the registered preset 
position. 
Auto function:  Activate the auto function of the camera according to the settings of the camera 
Note:
	 •	 The	camera	operation	can	be	performed	only	when	displaying	images	on	a	1-screen	on	monitor	1.	
	 •	 Depending	on	the	model	of	the	camera,	some	operations	may	not	work.	
	 •	 When	a	user	with	a	higher	user	priority	is	operating	at	the	same	time,	it	may	be	impossible	to	operate	the	 camera. Refer to the Installation Guide for further information about th\
e priority.
	 •	 Refer	to	page	118	for	how	to	display	the	setup	page	of	the	camera	and	configure	the	settings	of	the	camera.	
 
Panning/Tilting
Adjust the horizontal/vertical position of images from the camera. 
    
Step 1
Display the top page of the operation window.  
(☞ Page 77)
Step 2
Display live images from the camera on a 1-screen, 
and then click the [CAM] tab. 
  →  The [CAM] tab will be displayed. 
    Step 3
Adjust the horizontal position and the vertical position 
of the camera (direction) by any of the following. 
Control buttons: Click to move (pan/tilt) a camera in  the clicked direction.
Control pad: Click to move (pan/tilt) a camera in the  clicked direction. Panning/tilting speed will 
become faster if a clicked point gets farther from 
the center point of the control pad. 
Image display area: Click the desired point to be  located at the center of the angular field of view. 
The camera will move to locate the clicked point 
as the center point in the image display area.
     
						

							115
Step 1
Display the [CAM] tab. (☞ Page 114)
Step 2
Zooming can be adjusted by clicking the [–] button 
(wide) or the [+] button (tele) in the [Zoom] box. 
    
Note:
	 •	 It	is	possible	to	adjust	zooming	using	the	mouse	 wheel. 
 
    
Zooming
Zoom in/out images from the camera. Depending on the models of the connected cameras, the available zoom-
ing factors may be different. Refer to the operating instructions of the camera for further infor\
mation.
    
Focus adjustment
Adjust the focus of the camera. The auto focus function is available.
    
Step 1
Display the [CAM] tab. (☞ Page 114)
Step 2
Focusing can be adjusted by clicking the [Near] but-
ton or the [Far] button in the [Focus] box. 
The auto focus function can be performed by clicking 
the [Auto] button. 
     
						

							116
Step 1
Display the [CAM] tab. (☞ Page 114)
Step 2
Click the [C] button, and then select the preset posi-
tion number from the following. 
Home, 1 - 256 
    Step 3
When the [Register] button is clicked, the confirma-
tion window will be displayed. The camera direction 
will be registered and assigned to the selected preset 
position number by clicking the [OK] button on the 
displayed confirmation window.
When the [Move] button is clicked, the camera direc-
tion will move to the preset position corresponding to 
the selected preset position number. 
Note:
	 •	 It	is	impossible	to	register	the	position	as	"Home".	
	 •	 Only	users	whose	user	level	is	allowed	to	control	 cameras or to configure the settings can register 
the preset positions. 
	 •	 Refer	to	the	operating	instructions	of	the	camera	 for the available preset position numbers. 
 
    
Iris adjustment
Adjust the lens iris of the camera
Step 1
Display the [CAM] tab. (☞ Page 114)
Step 2
The brightness (lens aperture) can be adjusted by 
clicking the [–] (darker) button or the [+] (brighter) but-
ton in the [Brightness] box. It is possible to reset the 
adjusted brightness by clicking the [Reset] button.
    
Preset position function
It is possible to register preset positions of the camera and to move the camera direction to the registered pre-
set positions. 
     
						

							117
Step 1
Display the [CAM] tab. (☞ Page 114)
Step 2
Click the [C] button in the [Auto mode] box, and then 
select the desired auto function from the following.
Auto track: The camera will automatically track an  object moving on the screen. 
Auto pan: The camera direction will automatically  move (pan) between the start point and end point 
set in advance. 
Preset sequence: The camera will move (pan) to the  preset positions registered in advance in order of 
the preset position number (numerical order). 
Sort: The camera will move (pan) counterclockwise to  the preset positions registered in advance in order 
of the closest from the current position. 
Patrol 1 - 4: The camera will trace the manually  recorded panning pattern. 
Step 3
Click the [Start] button to start the selected auto 
mode function. 
    Step 4
Click the [Stop] button to turn off the auto mode func-
tion.
Note:
	 •	 Each	function	of	the	auto	mode	is	available	only	 for combination cameras. Refer to the operating 
instructions of the camera for further information 
about the auto mode function of the camera. 
 
    
Auto functions (Auto panning, etc.)
Activate the auto function of the camera according to the settings of the camera. 
     
						

							118
Step 1
Display the [CAM] tab. (☞ Page 114)
Step 2
Click the [OPEN] button in the [Menu] box.
  →  The setup window will be displayed and the setup 
menu of the camera will be displayed in the image 
display area. 
Step 3
Operate the setup menu of the camera.
    
Operate the setup menu of the camera
To control the camera connected to the recorder, it is necessary in advance to configure the settings of the 
camera function. The settings of the camera function can be configured on the setup menu of the camera. 
It is possible to call the setup menu of the camera from a PC. The contents of the setup menu and the opera-
tion procedures vary depending on the model of the camera. Refer to the operating ins\
tructions of the camera 
for further information.
The following are descriptions of how to display the setup menu of the camera and of how\
 to perform the basic 
operation. 
    
To operate the setup menu of the camera, use the fol-
lowing buttons.
Move the cursor Arrows button (C D A B)
Change parameters Arrows button (
A B)
Apply the set value or 
move to the lower level 
menu [SET] button
Move to the higher level 
menu [SETUP/ESC] button
Display the special 
menu Click the [Reset] button 
after moving the cursor 
onto [SPECIAL] of the 
setup menu of the camera.
Reset the camera Click the [Reset all] button  after moving the cursor 
onto [CAMERA RESET] of 
the setup menu of the cam-
era.
Step 4
To close the setup menu of the camera, click the 
[Close] button.
Note:
	 •	 When	the	camera	has	the	refresh	function	 (REFRESH), it is possible to execute the refresh 
function by clicking the [Reset] button.
	 •	 The	camera	setup	window	may	sometimes	remain	 displayed after the setup menu of the camera is 
closed such as when resetting the camera, etc. In 
this case, click the [Close] button of the camera 
setup window. 
	 •	 Only	users	whose	user	level	is	allowed	to	control	 cameras or to configure the settings can configure 
the settings of the camera. 
  
						

							119
Disk management
Step 1
Display the top page of the operation window.  
(☞ Page 77)
Step 2
Click the [Setup] button.
  →  The setup menu will be displayed. 
    Step 3
Click the [Maintenance] button.
  →  The [Product information] tab of "Maintenance" of 
the setup menu will be displayed. 
Step 4
Click the [Disk] tab.
  →  The [Disk] tab will be displayed.
    
On the [Disk] tab of "Maintenance" of the setup menu, it is possible to \
perform operation relating to the hard 
disk drives in the recorder or in an optional extension unit, DVD and SDHC/SD memory card.
The following are descriptions of how to delete images recorded on the hard disk drives and of how to format 
(initialize) a DVD or an SDHC/SD memory card from a PC. 
Delete images recorded on the hard disk drives manually
The following are descriptions of how to manually delete images recorded in the normal recording area and the 
event recording area on the hard disk drives in the recorder. 
By designating a time and date, all the images recorded until the day before the designated time and date will 
be deleted. It is useful to delete unnecessary images. 
Important:
	 •	 Note	that	the	deleted	images	cannot	be	recovered	and	the	remaining	disk	capacity	will	not	increase	even	 though deletion is performed.
  Note:
	 •	 It	is	possible	to	delete	recorded	images	automatically	when	the	set	days	have	passed	from	the	day	the	 image was recorded (HDD auto deletion). Refer to the Installation Guide for further i\
nformation. 
  
						

							120
Step 5
Set time and date after selecting "NML rec." or "EVT 
rec." for "Data delete". 
Images recorded until the day before the set date are 
subject to deletion. 
Step 6
Click the [Execute] button. 
  →  The confirmation window will be displayed. 
Step 7
Click the [OK] button.
  →  Images recorded until the day before the set date 
will be deleted.