Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Have a look at the manual Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
Step 1
Display the camera control panel (☞ page 64), and
then press the camera selection button [2] on the
front panel.
→ The [Focus] tab will be displayed.
Step 2
Press the arrows button (A B). When pressing A,
the focal point will move to the near side. When
pressing A, the focal point will move to the far side. It
is possible to automatically adjust the focus by press-
ing the [SET] button on the front panel.
Focus adjustment
Adjust the focus of the camera. The auto focus...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-65.png "Page 66
66
Step 1
Display the camera control panel (☞ page 64), and
then press the camera selection button [2] on the
front panel.
→ The [Focus] tab will be displayed.
Step 2
Press the arrows button (A B). When pressing A,
the focal point will move to the near side. When
pressing A, the focal point will move to the far side. It
is possible to automatically adjust the focus by press-
ing the [SET] button on the front panel.
Focus adjustment
Adjust the focus of the camera. The auto focus...")
![Page 67
67
Step 1
Move the camera direction to a position to be regis-
tered as a preset position.
Step 2
Display the [Pan/Tilt] tab of the camera control panel
(☞ page 65)
Step 3
Press the [SET] button on the front panel.
→ The "Preset/Auto" window will be displayed.
Step 4
Enter a preset position number to be registered.
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
Step 5
Move the cursor onto the [Regist] button, and...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-66.png "Page 67
67
Step 1
Move the camera direction to a position to be regis-
tered as a preset position.
Step 2
Display the [Pan/Tilt] tab of the camera control panel
(☞ page 65)
Step 3
Press the [SET] button on the front panel.
→ The \"Preset/Auto\" window will be displayed.
Step 4
Enter a preset position number to be registered.
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
Step 5
Move the cursor onto the [Regist] button, and...")
![Page 68
68
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Enter the preset position number to move the camera
direction.
The preset position number can be entered in the
same manner as of the preset number registration
(☞ page 67).
When entering number "000", the camera direction
will move to the home position.
Note:
• It is necessary to register the "Home" position by configuring the settings of the camera in advance.
Step 3
Move the cursor onto the [Call]...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-67.png "Page 68
68
Step 1
Display the \"Preset/Auto\" window. (☞ Page 67)
Step 2
Enter the preset position number to move the camera
direction.
The preset position number can be entered in the
same manner as of the preset number registration
(☞ page 67).
When entering number \"000\", the camera direction
will move to the home position.
Note:
• It is necessary to register the \"Home\" position by configuring the settings of the camera in advance.
Step 3
Move the cursor onto the [Call]...")
![Page 69
69
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Move the cursor onto "Auto mode", and then select
the desired auto function by rotating the jog dial
(inside).
The following 8 auto functions can be selected.
Auto track, auto pan, preset sequence, sort, patrol 1,
patrol 2, patrol 3, patrol 4
Refer to the operating instructions of the camera for
information about each auto function.
Step 3
Move the cursor onto the [Start] button, and then
press the [SET] button.
→...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-68.png "Page 69
69
Step 1
Display the \"Preset/Auto\" window. (☞ Page 67)
Step 2
Move the cursor onto \"Auto mode\", and then select
the desired auto function by rotating the jog dial
(inside).
The following 8 auto functions can be selected.
Auto track, auto pan, preset sequence, sort, patrol 1,
patrol 2, patrol 3, patrol 4
Refer to the operating instructions of the camera for
information about each auto function.
Step 3
Move the cursor onto the [Start] button, and then
press the [SET] button.
→...")
![Page 70
70
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto "Camera menu" on the displayed menu list,
and then press the [SET] button.
→ The camera menu will be displayed and the cam-
era setup menu will be displayed on the monitor.
Note:
• The status bar will be hidden while the camera menu panel is...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-69.png "Page 70
70
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto \"Camera menu\" on the displayed menu list,
and then press the [SET] button.
→ The camera menu will be displayed and the cam-
era setup menu will be displayed on the monitor.
Note:
• The status bar will be hidden while the camera menu panel is...")
![Page 71
71
Disk management
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Setup Menu] button, and
then press the [SET] button.
→ The setup menu will be displayed.
Step 3
Move the cursor onto "Maintenance", and then press
the [SET] button.
→ The [Product information] tab of "Maintenance" of
the setup menu will be displayed.
On the [Disk] tab of "Maintenance" of the setup menu, it is possible to \...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-70.png "Page 71
71
Disk management
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Setup Menu] button, and
then press the [SET] button.
→ The setup menu will be displayed.
Step 3
Move the cursor onto \"Maintenance\", and then press
the [SET] button.
→ The [Product information] tab of \"Maintenance\" of
the setup menu will be displayed.
On the [Disk] tab of \"Maintenance\" of the setup menu, it is possible to \...")
![Page 72
72
Step 4
Move the cursor onto "Disk", and then press the
[SET] button.
→ The [Disk] tab will be displayed.
Step 5
Move the cursor onto [Next page C], and then press
the [SET] button to display the next page.
Select the recording area on which data to be deleted
from "Normal recording area" or "Event recording
area", and then set the date by rotating the jog dial
(inside). Images recorded until the day before the set
date are subject to deletion.
Step 6
Move the cursor...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-71.png "Page 72
72
Step 4
Move the cursor onto \"Disk\", and then press the
[SET] button.
→ The [Disk] tab will be displayed.
Step 5
Move the cursor onto [Next page C], and then press
the [SET] button to display the next page.
Select the recording area on which data to be deleted
from \"Normal recording area\" or \"Event recording
area\", and then set the date by rotating the jog dial
(inside). Images recorded until the day before the set
date are subject to deletion.
Step 6
Move the cursor...")
![Page 73
73
Step 1
Display the [Disk] tab. (☞ Pages 71 - 72)
Step 2
Move the cursor onto the [Execute] button of "SD
card format", and then press the [SET] button.
→ The confirmation window will be displayed.
Step 3
Move the cursor onto [OK], and then press the [SET]
button.
→ Formatting of the SDHC/SD memory card will
start and the format progress window will be dis-
played. When completing the format, the format
completion window will be displayed.
Important:
• Do not turn off the...](http://img.usermanuals.tech/thumb/58/72247/w64_wj-hd616_716_oi_d-72.png "Page 73
73
Step 1
Display the [Disk] tab. (☞ Pages 71 - 72)
Step 2
Move the cursor onto the [Execute] button of \"SD
card format\", and then press the [SET] button.
→ The confirmation window will be displayed.
Step 3
Move the cursor onto [OK], and then press the [SET]
button.
→ Formatting of the SDHC/SD memory card will
start and the format progress window will be dis-
played. When completing the format, the format
completion window will be displayed.
Important:
• Do not turn off the...")
71
Disk management
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Setup Menu] button, and
then press the [SET] button.
→ The setup menu will be displayed.
Step 3
Move the cursor onto "Maintenance", and then press
the [SET] button.
→ The [Product information] tab of "Maintenance" of
the setup menu will be displayed.
On the [Disk] tab of "Maintenance" of the setup menu, it is possible to \
perform operation relating to the hard
disk drives in the recorder or in an optional extension unit and SDHC/SD memory card.
The following are descriptions of how to delete images recorded on the hard disk drives and of how to format
(initialize) an SDHC/SD memory card.
Delete images recorded on the hard disk drives manually
The following are descriptions of how to manually delete images recorded in the normal recording area and the
event recording area on the hard disk drives in the recorder.
By designating a time and date, all the images recorded until the day before the designated time and date will
be deleted. It is useful to delete unnecessary images.
Important:
• Note that the deleted images cannot be recovered and the remaining disk capacity will not increase even though deletion is performed.
Note:
• It is possible to delete recorded images automatically when the set days have passed from the day the image was recorded (HDD auto deletion). Refer to the Installation Guide for further i\
nformation.
72
Step 4
Move the cursor onto "Disk", and then press the
[SET] button.
→ The [Disk] tab will be displayed.
Step 5
Move the cursor onto [Next page C], and then press
the [SET] button to display the next page.
Select the recording area on which data to be deleted
from "Normal recording area" or "Event recording
area", and then set the date by rotating the jog dial
(inside). Images recorded until the day before the set
date are subject to deletion.
Step 6
Move the cursor onto the [Delete] button, and then
press the [SET] button.
→ The confirmation window will be displayed.
Step 7
Move the cursor onto [OK], and then press the [SET]
button.
→ Images recorded until the day before the set date
will be deleted.
73
Step 1
Display the [Disk] tab. (☞ Pages 71 - 72)
Step 2
Move the cursor onto the [Execute] button of "SD
card format", and then press the [SET] button.
→ The confirmation window will be displayed.
Step 3
Move the cursor onto [OK], and then press the [SET]
button.
→ Formatting of the SDHC/SD memory card will
start and the format progress window will be dis-
played. When completing the format, the format
completion window will be displayed.
Important:
• Do not turn off the power of the recorder in the process of formatting.
Format (initialize) an SDHC/SD memory card
To copy recorded images onto an SDHC/SD memory card, it is necessary in advance to insert an SDHC/SD
memory card into the card slot of the recorder and format it. To delete recorded images on the SDHC/SD mem-
ory card, format the SDHC/SD memory card again.
Important:
• When an SDHC/SD memory card is formatted, all recorded images and setup data on the SDHC/SD memo- ry card will be deleted. It is impossible to recover the deleted images and setup data.
• It is impossible to copy record images onto an SDHC/SD memory card formatted on a PC. Format the SDHC/SD memory card on the recorder.
74
Configure the network settings
Step 1
Click "Start" on the task bar, and then click "Control
Panel".
→ The control panel will be displayed.
Important:
• Log in to the PC as an administrator.
Step 2
Click the "Network and Internet Connections" icon.
→ The "Network and Internet Connections" window
will be displayed.
From this page to the "Disk management" chapter (☞ page 121), the instructions of how to operate the record-
er using a web browser are provided.
When operating the recorder using a web browser, it is necessary in advance to configure the network settings
of the recorder and a PC.
When the network settings of the PC are as follows, it is unnecessary to configure the settings. It is possible to
configure the settings and operate the recorder using a web browser after completing the connection.
IP address: 192.168.0.2 – 192.168.0.249, 192.168.0.251 – 192.168.0.254
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
When the settings are configured differently from the above, configure the network settings of the recorder or a
PC.
Configure the network settings of the recorder
To conform the settings of the recorder to the environment of PC’s, configure the settings using the buttons on
the front panel of the recorder.
Refer to the chapter relating to the [Basic] tab of "Network" of the setup menu for how to ope\
rate ( ☞ Installation
Guide).
Configure the network settings of the PC
The TCP/IP setting of the PC shall be changed to conform to the settings\
of the recorder.
When using the recorder with the default (IP address: 192.168.0.250), set the IP address of the PC to
"192.168.1.xxx (a number from 2 to 254 except 250)".
In these operating instructions, the settings are performed on Windows XP as examples. Refer to the operating
instructions of the respective OS for further information.
75
Step 3
Click "Network Connections".
→ The "Network Connections" window will be dis-
played.
Step 4
Double-click "Local Area Connection".
→ The "Local Area Connection Properties" window
will be displayed.
Step 5
Click "Properties".
→ The "Local Area Connection Properties" window
will be displayed.
Step 6
Click "Internet Protocol (TCP/IP)", and then click
"Properties".
→ The "Properties" window of "Internet Protocol
(TCP/IP)" will be displayed.
Step 7
Click "Use the following IP address" and enter the IP
address and the subnet mask as follows.
• IP address: 192.168.0.9
• Subnet mask: 255.255.255.0
Depending on the network configuration, it is neces-
sary to configure the default gateway. Refer to a sys-
tem administrator for further information about the
settings.
Step 8
Click the [OK] button and close the window.
76
RouterRouter
PC RecorderIP address: 192.168.1.1
Subnet mask: 255.255.255.0
IP address: 192.168.1.100
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1* Stands for Wide Area Network
WAN*
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
IP address: 192.168.0.250
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Switching hub
Firewall
PC
Router
Router
Recorder
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
IP address: 192.168.1.100
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
* Stands for Wide Area NetworkWAN*
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
IP address: 192.168.0.250
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Network security of the recorder
The security function of the recorder
q Access restriction by the user authentication and the host authentication
It is possible to restrict users to access the recorder by selecting "On" for "User authentication/Host authen-
tication". (☞ Installation Guide)
w Access restriction by changing the HTTP port number
By changing the HTTP port number, it is possible to prevent illegal access such as a port scanning, etc.
(☞ Installation Guide)
To enhance the network security
It is possible to enhance the network security by dividing the subnet us\
ing a router to authenticate users twice
(by the recorder and by the router). When connecting the recorder to an unsecured network, secure the network
connection by installing a VPN (Virtual Private Network) device, etc. \
between the recorder and the host PC.
Important:
• The settings for the network security varies depending on the network to which the recorder is to be connected such as an intranet or Internet service provider. Refer to a network administrator for further
information about the network security.
[Connection example]
By using a firewall, etc., it is possible to use packet filtering and protocol filtering to enhance the network secu-
rity.
[Connection example]
77
Display the operation window
Step 1
Start the web browser.
Step 2
Enter the IP address or URL assigned to the recorder
into the [Address] box, and then press the [Enter] key.
→ The authentication window will be displayed. The
authentication window will not be displayed when
"Off" is selected fro "User authentication" on the
[Basic] tab of "User mng." of the setup menu.
Important:
• Refer to a system administrator for further infor -
mation about the set IP address.
• It is impossible to access the recorder from a PC whose IP address is not registered in the recorder
when "On" is selected for "Host authentication"
on the [Basic] tab of "User mng." of the setup
menu. Refer to a system administrator for further
information.
• Do not attach "0" before the numbers when enter -
ing IP address.
Example:
b
192.168.0.50
X 192.168.0.050
• If a message is displayed on the information bar, see page 127.
Note:
• When displaying the top page of the operation window of the recorder on a PC for the first time,
the wizard for ActiveX installation required to dis-
play images from cameras will be displayed.
Follow the instructions of the wizard to complete
the installation.
• When any ActiveX for Panasonic’s digital disk recorder other than this product is already
installed, uninstall "WebVideo ActiveX" from "Add
or Remove Programs" in "Control Panel" and then
install ActiveX for this product.
• When the installation wizard is displayed each time displaying other page even though installa-
tion of ActiveX for this product has been complet-
ed, reboot the PC.
Step 3
Enter the user name and password registered in the
recorder, and then click the [Login] button.
→ The top page will be displayed.
Important:
• Refer to a system administrator for the set user name and password.
• Refer to the Installation Guide for how to register users.
• The default administrator name and password are as follows.
Administrator name: ADMIN
Password: 12345
• To enhance the security, change the administrator name and password before running the recorder.
Change the password periodically.
Refer to the Installation Guide for how to change
the password.
• Refer to page 127 when a message is displayed on the information bar or when an unnecessary
status bar or scroll bar is displayed on the pop-up
window.
Boot the PC and operate the recorder using a web browser.
78
About the operation window
[Control] button (☞ page 79)
It is possible to operate the switcher functions of the
camera such as switching the camera channel to dis-
play live images from a different camera or start the
sequence display using the operation panel displayed
by clicking this button. The search result will also be
displayed on this tab.
[Setup] button
Operation relating to the settings of the recorder can
be performed using the operation panel displayed by
clicking this button. Refer to Installation Guide for fur-
ther information about the setup menu.
Status display area (☞ page 81)
The current status of the recorder such as playback
status, recording status, etc. will be displayed.
Current time and date/Recording time and date
display area
When displaying live images in the image display
area, the current time and date will be displayed.
When displaying recorded images, the recording time
and date (when images were recorded) will be dis-
played.
Image display area
Live images or recorded images will be displayed.
When configuring the settings, the setup menu will be
displayed.
Download operation area (☞ page 82)
Downloading of recorded images or the viewer soft-
ware can be made on this area.
[HDD] tab (☞ page 82)
Playback operation of recorded images can be made
on this tab.
[CAM] tab (☞ page 83)
Camera control such as zooming, focus adjustment,
auto panning, etc. can be made on this tab.
Top Page
[Control] button
[Setup] button
Status display area Current time and date/Recording
time and date display area
Image display area
[CAM] tab
Download operation
area
[HDD] tab
79
[Cam. select] box
Images from the selected camera channel will be dis-
played on a 1-screen in the image display area by
clicking the button.
[Multiscreen select] box
Images from 4 - 16 cameras can be displayed simul-
taneously on a multi-screen.
4-screen button: Each time this button is clicked, images from different camera groups will be dis-
played on a 4-screen.
9-screen button: Each time this button is clicked, images from different camera groups will be dis-
played on a 9-screen.
16-screen button: Images from camera channels 1 - 16 will be displayed on a 16-screen.
[Sequence] box
Images from different cameras will sequentially be
displayed according to the settings configured in
advance by clicking the button. The indicator on the
button will light green during the sequence display.
(☞ Page 88)
[El-zoom] box
Images from the camera will be displayed at a scale
corresponding to the clicked zoom factor button.
[x1] button: x1
[x2] button: x2
[x4] button: x4
[Search] box
Use this button to search recorded images.
When selecting "HDD" for "Disk/Media", the
[Recording event] button and the [VMD] button will be
displayed. The recording event list window or the
VMD search list window will be displayed by clicking
each button respectively.
When selecting "DVD" or "SD" for "Disk/Media", the
[Copy data] button will be displayed. The copy data
window will be displayed by clicking the [Copy data]
button.
The search result will be displayed in list form at the
bottom of the [Search] box.
[Copy] button
The copy data window will be displayed by clicking
this button. Use this button to manually copy record-
ed images onto a DVD or an SDHC/SD memory card.
(☞ Page 104)
Recording event list window
Number of the listed data: Total number of the listed data (recording event) will be displayed. When the
total number of the listed data ismore than
10 000, the ">10000" indication will be displayed.
[All list] button: Cancels filtering and lists all record- ing events.
[Refresh] button: Updates the list to the latest one.
[Prev page] button: Displays the previous page of the list.
[Next page] button: Displays the next page of the list.
[Time & date]: Start time of recording will be dis- played.
[Control] button
The following operation panels will be displayed when this button is cli\
cked.
80
[Ch]: A camera channel used for recording will be displayed.
[Evt]: Event type will be displayed. (☞ Page 8)
[HDD]: The hard disk drive number in which the cor- responding recorded images are stored will be
displayed.
[Audio]: When audio is attached to recorded images, the audio icon will be displayed.
[Zoom in] button
Live images from the camera or recorded images will
be enlarged by clicking this button.