Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

							141
•When an ANSWER command is required
The unit sends back the status or data, as shown in the figure.
•About ACK code
After receiving an command from the PC, the unit sends back the ACK code to the PC in 20 ms or less.
[ACK] = Reception succeeded (ASCII code: 06H)
After the ACK code sending back and the command processing has completed, the unit sends back the response com-
mand to the PC.
Example:
These are examples for the following operations.
1. Login with the user name of ADMIN and with password of 12345.
2. Display images from the camera channel 1 on the monitor 2.
3. Start playback from the point of January 1 2003, 3:00 p.m.
4. Logout
(1) (This unit -> PC) Login
[STX]AD001;OLI:ADMIN[SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP]
[SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP]:12345[SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP]
[SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP] [SP][ETX]
When receiving the command above, this unit will start the login procession of the user name of ADMIN.
(2) (This unit -> PC) Response against (1).
[STX]AD001;OLI:1[ETX]
(3) (PC -> This unit) Select the monitor 2
[STX]AD001;OMS:001[ETX]
(4) (This unit -> PC) Response against (3).
[STX]AD001;OLI:1[ETX]
(5) (PC -> This unit) Display images from the camera channel 1.
[STX]AD001;OCS:00001[ETX]
(6) (This unit - > PC) Response against (5).
[STX]AD001;OCS:00002[ETX]
(7) (PC -> This unit) Playback from the designated time point.
[STX]AD001;ZTP:20030101150000[ETX]
When receiving the command above, this unit will start playback from the point of January 1 2003, 3:00 p.m.
(8) (This unit - > PC) Response against (7).
[STX]AD001;ZTP: 200301011500000[ETX]
[STX] [ETX]QOP
Status inquiry command Status information command Transmission command (→ The unit) Response command (← The unit)
[STX] [ETX]OPL
[STX] [ETX]QRV
Version inquiry command Sends back data. Transmission command (→ The unit) Response command (← The unit)
[STX] [ETX]QRV:1.01:1.01:1.00:1.10 
						

							142
•Parameter error
When the unit cannot properly process the received command, the unit sends back an error code to the PC. After clearing
the receive buffer, the unit enters the wait state until receiving the following [STX] command.
•If the unit receives another command during the response, the unit will respond to the command after processing the cur-
rent response. 
•If the unit received the [STX] command again before receiving the [ETX] command, the unit will clear the internal buffer.
Then, the unit will process the data following to the [STX] command. (The commands received before the second [STX]
command will be canceled.)
•The internal buffer will be cleared when it fills up.*
Reason for the error
001: Command invalid (There is no associated command.)
002: Parameter invalid (The number, digit, or range of the command 
parameters is incorrect.)
003: Command invalid (The unit does not support the operation mode.)
E: Command error (ASCII code: 45H)
ERN[ETX] =Error
(9) (PC -> This unit) Logout.
[STX]AD001;OLO [ETX]
When receiving the command above, the user logged in via SERIAL (RS232C) (ADMIN) will logout.
(
10)(This unit - > PC) Response against (9).
[STX]AD001;OLO[ETX]
Note: The character code of [STX], [ETX] and [SP] are as follows.
[STX]: 02h
[ETX]: 03h
[SP] (space): 20h
3. Reception Error
The response command differs between the reception error and parameter error.
•Communication error (Reception error)
When the unit cannot properly receive the command due to the communication error, the unit immediately sends back the
NACK code to the PC. After clearing the receive buffer, the unit enters the wait state until receiving the following [STX]
command.
[NCK]     = Reception failed (ASCII code: 15H)
Reason for the communication error
1: Parity error (ASCII code: 31H)
2: Framing error (ASCII code: 33H)
3: Overrun error (ASCII code: 34H)
N 
						

							143
1 2
IN
OUT
CASCADE
OUT
16 16 315 1514
1413
2 113
12 1211
1110
109
98
87
76
65
54
43
32
21
1VIDEO
AUDIO IN AUDIO OUTMONITOR OUT CASCADE INMONITOR (VGA) ALARM/CONTOROLSERIAL ALARMPOWER COPY 1 MODEEXT STORAGE 10/100BASE-T RS485(CAMERA)DATAAC  IN
SIGNAL GND1
42
D-sub Pin 9
(Female)D-sub Pin 9
(Female)
This unitPersonal compute
Pin No. Signal Name I/O
1CDIN
2TXD IN
3RXD OUT
4DTR OUT
5SG–
6DSR IN
7RTS OUT
8CTS IN
9RIIN WJ-HD316 Rear View
51
96
7 (RTS)
8 (CTS)
3 (TXD)
5 (GND)
2 (RXD)7 (RTS)
8 (CTS)
3 (TXD)
5 (GND)
2 (RXD)
WJ-HD316
PC or another device
Cross cable connection example
4. PC Connection Example
RS232C crossing cable is used for connection between the unit and PC. (Refer to the following page for cable specification.) 
						

							144
Basic Operation
Item
Forward a field
Rewind a field
Pause during playback
Play
Manual recording
Manual recording with
text
Stop
Skip & play forward
Skip&play reversely
Record No. Search and
playback
Time & date search and
playback
Record skip
LISTED Playback
Playback latest image
A - B repeat playback
Display COPY SETUP
MENU
Display text
Multi-screen switching
Monitor selection
Camera selection
Transmission command (ASCII)
OVF
OVR
OPA
OPL
ORC
ZMR:nn:ddd...
ddd
OSP:n
OSF:n
OSR:n
ZPR:rrrrrrrrrrrrrrrr:mm
ZTP:yyyymmddhhnnss
OSK:dnn
ZLT:n
ZPM
ZRP:n
ZPD:n
ZDT:n
OTC:m
OMS:nnnn
OCS:ccccc
Response command (ASCII)
OVF
OVR
OPA
OPL
ORC
ZMR:nn
OSP
OSF
OSR
ZPR:rrrrrrrrrrrrrrrr
ZTP:yyyymmddhhnnss
OSK
ZLT:n
ZPM
ZRP:n:yyyymmddhhnnss
ZPD:n
ZDT:n
OTC:m
OMS:nnnn
OCS:ccccc
Parameter (ASCII)
nn=01~99 (Sequence number)
ddd...
ddd: text (200 bytes or less)
n=P: Stops PLAY
n=R: Stops REC
no parameter stops PLAY and REC
n=0F Normal speed
n=1F x2 speed
n=2F x5 speed
n=3F x10 speed
n=4F x20 speed
n=5F x50 speed
n=6F x100 speed
n=0S Normal speed
n=1S 1/2 speed
n=0F Normal speed
n=1F x2 speed
n=2F x5 speed
n=3F x10 speed
n=4F x20 speed
n=5F x50 speed
n=6F x100 speed
n=0S Normal speed
n=1S 1/2 speed
rrrrrrrrrrrrrrrr Record No.
yyyymmddhhnnss:Time & date of playback
image
d=+ Forward
– Backward
nn=01 Number of skipped records: Fixed
n=0 OFF
n=1 ON
n=0 A - B repeat playback OFF 
n=1 Set repeat start point (A point)
n=2 Set repeat end point (B point)
yyyymmddhhnnss: Date and time of A/B point
n=0 COPY SETUP MENU OFF
n=1 COPY SETUP MENU ON
n=0 Text display OFF
n=1 Text display ON
m=0 4-split screen
m=1 7-split screen
m=2 9-split screen
m=3 10-split screen
m=4 13-split screen
m=5 16-split screen
nnnn=0001 Select MON 1
nnnn=0002 Select MON 2
ccccc: Camera CH
●Command Table 
						

							145
Item
Start sequence
Stop sequence
Disk selection
Marking
Alarm Control
Item
Alarm input
Alarm input with text
Alarm reset
Alarm suspension
Alarm change information
(LED indication)
Alarm change information
Setup Control
Item
Display SETUP MENU
Transmission command (ASCII)
MSU:n
DCR:n1n2
TSU:yyyymmddhhnn
MST:n
MRM:n
Response command (ASCII)
MSU:n
DCR
TSU
MST
MRM
Parameter (ASCII)
n=0 SETUP MENU OFF
n=1 SETUP MENU ON
n1n2=A1 Right
n1n2=C1 Upward
n1n2=E1 Left
n1n2=G1 Downward
n1n2=+1 Increment parameter (+)
n1n2=-1 Decrement parameter (–)
n1n2=PD Move to virtual menu (SET)
n1n2=P- Go back to an older page (BACK)
n1n2=PU Move to upper layer (ESC)
yyyymmddhhnn: Date and time
n=0 Standard time n=1 Summer time
n=0 Normal recording mode
n=2 Continuous (External timer) recording
mode
Transmission command (ASCII)
OQT:01F
OQS:0
ZDS:k
ZMP
Transmission command (ASCII)
OAI:b1b2b3a1a2a3a4
ZAI:b1b2b3a1a2a3a4:
nn:ddd...
ddd
OAL;n
MAD:n
–
–
Response command (ASCII)
OQT:01F:01
OQS
ZDS:k
ZMP
Response command (ASCII)
OAI
ZAI:nn
OAL
MAD:n
ALD:n
ALM: b
1b2b3a1a2a3a4
Parameter (ASCII)
b1b2b3: Head alarm CH information (binary)
a
1a2a3a4: Alarm CH information (binary)
b
1b2b3: Head alarm CH information (binary)
a
1a2a3a4: Alarm CH information (binary)
nn=01 - 99 (Sequence No)
ddd...
ddd: text (200 bytes or less)
n=0 Alarm all reset
n=1 Alarm reset
n=0 Alarm suspension OFF
n=1 Alarm suspension ON)
n=0 LED OFF
n=1 LED ON
n=2 LED Blinking
b1b2b3: Head alarm CH information (binary)
a1a2a3a4: Alarm CH information (binary)
Parameter (ASCII)
k=0 HDD normal/event recording sector 
k=1 HDD copy sector
k=2 Disk connected to COPY 1
k=3 Disk connected to COPY 2) Electronic zooming OZM:m OZM:n m=0 Electronic zooming OFF
m=1 Electronic zooming ON
m=> Switch x2 -> x4
m=< Switch x4 -> x2
m=+ Switch Electronic zooming OFF -> x2 ->
x4 -> Electronic zooming OFF -> ...
m=- Switch x4 -> x2 -> Electronic zooming OFF
-> x4 -> ...
n=0 Electronic zooming OFF
n=2 x2
n=4 x4 term
Move cursor
Date & Time setup
Summer time setup
Recording mode setup
Login/Logout
Item
Login
Logout
Transmission command (ASCII)
OLI:uuu...uuu:
ppp...
ppp
OLO
Response command (ASCII)
OLI:n
OLO
Parameter (ASCII)
uuu...uuu: User name (32-byte fixed length)
ppp...ppp: Password (32-byte fixed length)
n=0 Error in user name/password
n=1 Login succeeded
n=2 Login failed 
						

							146
Data Control
Item
Copy by specifying
record
Copy by specifying date
& time
Data copy completed
Cancel data copy
Erase log
Log data total number
inquiry
Log readout
Record list acquisition
Text acquisition
Text writing
Disk End Notification
Item
Disk end auto-notification
setting
Disk end auto-notification
Transmission command (ASCII)
MDE:n
HDE:–
Response command (ASCII)
MDE:n
HDE:p
Parameter (ASCII)
n=0 (Auto-notification OFF)
n=1 (Auto-notification ON)
p=1 (Normal recording sector)
p=2 (Event recording sector)
p=3 (Copy sector)
Transmission command (ASCII)
ZCR:rrrrrrrrrrrrrrrr:m
ZCT:y
1y1y1y1m1m1d1d1h1h1n1n1:y2y2y2y2m2m2d2d2h2h2n2n2:s:ccc:m
–
ZDC
ZLC:k
ZLQ:k:y
1y1y1y1m1m1d1d1h1h1n1n1:y2y2y2y2m2m2d2d2h2h2n2n2
ZLR:yyyymmdd
hhnn:mmmmmmmm
ZGR:yyyymmddnn
:nnnnnnnn
ZGT:rrrrrrrrrrrrrrrr
ZPT:rrrrrrrrrrrrrrrr: 
Response command (ASCII)
ZCR
ZCT
ZEC:y
1y1y1y1m1m1d1d1h1h1n1n1:
y
2y2y2y2m2m2d2d2h2h2n2n2:s:ccc:m
ZDC
ZLC:k
ZLQ:k:y
1y1y1y1m1m1d1d1h1h1n1n1y2y2y2y2m2m2d2d2h2h2n2n2:dddddddd
ZLR:k:s1:s2:...
:sn
ZGRs1:s2:...
:sn
ZGT:rrrrrrrrrrrrrrrr: 
ZPT:rrrrrrrrrrrrrrrr
Parameter (ASCII)
rrrrrrrrrrrrrrrr: Record No.
m=0 Copy to HDD copy sector
m=1 Copy to media connected to COPY 1
m=2 Copy to media connected to COPY 2
y
1y1y1y1m1m1d1d1h1h1n1n1: Start date & time of
data copy
y
2y2y2y2m2m2d2d2h2h2n2n2: End date & time of
data copy
s=0 Format to specify the camera CH. Fixed to
0
ccc: Camera CH No. of target for data copy
m=0 Copy to HDD copy sector
m=1 Copy to media connected to COPY 1
m=2 Copy to media connected to COPY 2
y
1y1y1y1m1m1d1d1h1h1n1n1 Start date & time of
data copy
y
2y2y2y2m2m2d2d2h2h2n2n2End date & time of
data copy
s=0 Format to specify the camera CH. Fixed to
0
ccc: Camera CH No. of target for data copy
m=0 Copy to HDD copy sector
m=1 Copy to media connected to COPY 1
m=2 Copy to media connected to COPY 2
k=1 Event input log
k=2 Trouble log
k=3 Access log
k=0 Record list
k=1 Event input log
k=2 Trouble log
k=3 (Access log)
y
1y1y1y1m1m1d1d1h1h1n1n1: Start date & time of
inquiry range
y
2y2y2y2m2m2d2d2h2h2n2n2: End date & time of
inquiry range
dddddddd: Log data total number
k=1 (Event input log)
k=2 (Trouble log)
k=3 (Access log)
yyyymmddhhnn Start date & time of readout
logs
mmmmmmmm: Total number of acquired logs
(00000000 - 00000050)
: Log data
sn: 0-9 Cyclic number
yyyymmddhhnn: Start date & time of readout
list
mmmmmmmm: Total record number in the
acquired list (00000001 - 00000050)
: Log data
sn: 0-9 Cyclic number
rrrrrrrrrrrrrrrr: Record No.
: text data
rrrrrrrrrrrrrrrr: Record No.
: text data 200 bytes or less 
						

							147
Search Operation
Item
Display search editing
area
Display Operation
Item
Switch display
Inquiry
Item
Additional disk space
inquiry
ID request
Interface ID request
Production category
request
Alarm information request
Software version inquiry
Status inquiry
Transmission command (ASCII)
Transmission command (ASCII)
QHR:p
QID
QIB
QIC
QLD:0
QRV
QSR DIN:n
Response command (ASCII)
Response command (ASCII)
QHR:p:sss
QID:WJ-HD309 
or 
QID:WJ-HD316
QIB:WJ-HD309 
or 
QIB:WJ-HD316
QIC:2
QLD:n
QRV:n.nn
QSR:Status 1:Status 2...n=0 (No alarm)
n=1 (Alarm end)
n=2 (Under alarm operation)
n.nn: Software version
Following response commands are sends back
for Status 1:Status 2...

msu:0 Under normal operation
msu:1 Under setting
oms:0001 Monitor 1
oms:0002 Monitor 2
ocs:ccccc ccccc: Camera number
otc:n Multiscreen segment display pattern
n=0: 4 segments
n=1: 7segments
n=2: 9 segments
n=3: 10 segments
n=4: 13 segments
n=5: 16 segments
oqt: 01F Sequence activated
ozm: 0 Zoom OFF
ozm: 2 x2 zoom
ozm: 4 x4 zoom
mad: 0 Alarm suspension OFF
mad: 1 Alarm suspension ON
zcd: Cascade activated
zqs: 1 CH recording activated:2 CH recording
activated...
16 CH recording activated
Recording status nn=00 (Recording stop)
nn=01 (Manual recording activated)
nn=02 (Event recording activated)
nn=03 (Schedule recording activated)
nn=04 (Emergency recording activated) DIN
Parameter (ASCII)
Parameter (ASCII)
p=1 HDD normal recording sector
p=2 HDD event recording sector
p=3 HDD copy sector
p=4 Disk connected to COPY 1
p=5 Disk connected to COPY 2
sss: Additional disk space (%) n=+
Transmission command (ASCII)
ZTL:n
Response command (ASCII)
ZTL:n
Parameter (ASCII)
n=0 (Search editing area OFF)
n=1 (Recording event search list ON)
n=2 (Recording event search thumbnail ON)
n=3 (VMD search list ON)
n=4 (VMD Search Thumbnail OFF)
n=5 (Marking search list ON)
n=6 (Marking search thumbnail ON)
n=7 (Search playback display ON) 
						

							148
zqm: Monitor status: camera CH: Playback
time
Monitor status n=0 Live
n=1 Live sequence
n=2 Playback
n=3 Other statuses
Camera CH
Playback time: yyyymmddhhnnss
ztl:n Search editing area ON
n=0 Search editing area OFF
n=1 Recording event search list ON
n=2 Recording event search thumbnail
ON
n=3 VMD search list ON
n=4 VMD search thumbnail ON
n=5 Marking search list ON
n=6 Marking search thumbnail ON
n=7 Search playback display ON
zdt:0 Text display OFF
zdt:1 Text display ON
Recording mode inquiry
Monitor status inquiry
Recording status inquiry
Record number informa-
tion
Camera SYNC status
inquiryQRM
ZQM
ZQS
–
QSY:a1a2a3a4a5
:b1b2b3b4b5QRM:n
ZQM:m:a
1a2a3a4:yyyy
mmddhhnnss
ZQS:1 CH recording activated:
2 CH recording activated...
16
CH recording activated
ZRN:sss:nn:rrrrrrrrrrrrrrrr
:nnyyyymmddhhnnss:
ccc:x;yyy:t
QSY:a
1a2a3a4a5b1b2b3b4b5:s1s2s3...
smn=0 Normal recording mode
n=2 Continuous (External timer) recording
mode
m=0 Live
m=1 Live sequence
m=2 Playback
m=3 Other statuses
a
1a2a3a4: Camera CH information (binary)
yyyymmddhhnnss: Playback time
Recording status nn=00 (Recording stop)
nn=01 (Manual recording activated)
nn=02 (Event recording activated)
nn=03 (Schedule recording activated)
nn=04 (Emergency recording activated)
sss: Unit address 
nn=Sequence number
rrrrrrrrrrrrrrrr: Record number
yyyymmddhhnnss: Recording event date and
time
ccc: Camera CH
x=0 Manual recording
x=1 Schedule recording
x=2 VMD recording
x=3 Alarm port recording
x=4 Command alarm recording
x=5 VIDEO LOSS recording
x=6 Emergency recording
yyy: Event-activated CH
t=0 Text included
t=1 Text not included
nn=Sequence number
a
1a2a3a4a5- b1b2b3b4b5: Range of camera CH
to inquire SYNC status
s
1s2s3...
sm: SYNC status of each camera
(s
m=0: SYNC status not found
s
m=1: SYNC status found)
Item Transmission command (ASCII) Response command (ASCII) Parameter (ASCII) 
						

							149
Communication
Item
Communication check
Transmission command (ASCII)
RCK
Response command (ASCII)
RCK
Parameter (ASCII)
Record information
inquiryZGP:rrrrrrrrrrrrrrrr ZGP:rrrrrrrrrrrrrrrr:
ccc:q:nnnn:yyyymmdd
hhnnss:nnss:t:ssssssrrrrrrrrrrrrrrrr: Record number
ccc: Camera CH
q: picture quality (0 (Very Fine), 1 (Fine), 2
(Normal), 3 (Extended))
nnnn: Recording rate
yyyymmddhhnnss: Recording start date and
time
nnss: Recording total time
t=0 Text included
t=1 Text not included
ssssss: Record size [KB]
Item Transmission command (ASCII) Response command (ASCII) Parameter (ASCII) 
						

							150
FLOWCHART OF THE SETUP MENU
Recording
Emergency REC
Recording
REC Setup Maintenance
REC Rate
Maintenance
Disk Info
Maintenance
Version info
Maintenance
Disk End Mode
Maintenance
Disk Capacity
Maintenance
Disk Delete
Maintenance
Error Log
Maintenance
Access Log Maintenance
Event LogEvent
Event SetupSchedule
Time Table
Maintenance
Monitor 1Display
OSD Setup
Comm
Camera ControlSystem
Basic Setup
System
Time & Date
System
User Regist.
System
User Edit
System
User Delete
System
Host Regist.
System
Host Edit
System
Host Delete
System
User Level
System
Save/Load
Time & Date
Summer Time
(Day Light Saving)
Ta b l e
Comm
PS·Data Setup
Comm
RS485 Setup
Comm
RS232 Setup
Comm
NW Setup 1
Comm
NW Setup 2
Comm
NTP SetupRS485 Setup
Control Camera CH
PS·Data Setup
Camera Number Setup
Display
Monitor 1
Display
Monitor 2
OSD Setup
Camera Title Monitor 1
Live Sequence
Maintenance
Monitor 2
Monitor 2
Live Sequence
Schedule
REC PROGRAM
Schedule
EVENT PROGRAM
Schedule
Special Days
REC PROGRAM
Recording Program
EVENT PROGRAM
Event Program
Event Program
VMD
Event Program
Video Loss
Event Program
Terminal/Command 
Alarm Event Setup
VMD
Event Setup
Video Loss
Event Setup
Terminal/Command 
Alarm
VMD Area Setup
For each camera
Event
VMD Setup
Event
Alarm Setup
Event
Terminal Setup