Panasonic DIla PROJECTOR PT-D995U Operating Instructions

Connecting to Various Devices
* Before connection, be sure to turn off the projector and connected devices.
* Read the manual which comes with each device thoroughly.
Signals that Can Be Input to the Projector
The following signals can be input to the projector:
Video signals
(1) Response to color systems
Color system NTSC
Input terminal PALSECAMNTSC4.43
VIDEO
Y/C
*1
Y, PB/B-Y, PR/R-Y*2*2 *2 *2
G, B, R, H/CS, V*2 *2 *2*2
*1 : Responds if Y/C output is available.
*2 : Signifies that component signals (“Y,...

Connecting to Various Devices (Cont.)
Connecting to Video Devices
Before connection, be sure to turn off both the projector and video device.
Read the manual which comes with each video device thoroughly.
Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied.
Video devices
To Y/CS video cable VCR (Video Cassette recorder)
BNC-RCA conversion plug (Supplied)
To VIDEO
To AUDIO (L)
AV connection
To AUDIO (R)cable (Supplied) Laser video disc player
Camcorder
To...

Connecting to Various Devices (Cont.)
Connecting to Other Devices
Before connection, be sure to turn off both the projector and other devices to be connected.
Thoroughly read the manual which comes with the device to be connected.Speakers with a built-in amplifier and game devices can be connected. Use the AV connection cable and audio cable suppli\
ed,
or the cable supplied with a game device.
BNC-RCA conversion plug (supplied) Game device, etc.
To VIDEO
To AUDIO (L)
To AUDIO (R)
Cable supplied with the...

Connecting to Various Devices (Cont.)
Connecting to Computer Devices
Before connection, be sure to turn off both the projector and computer devices.
Read the manual which comes with each device thoroughly.
Connection to an IBM PC or IBM-compatible computer
Use the supplied computer connection cable. Also, prepare cables required for connecting the devices connected.
Desktop typeWhen connecting an audio output terminal such as a computer sound
source to the projector, connect to the AUDIO terminal using...

Connecting to Various Devices (Cont.)
Connecting to Computer Devices (Cont.)
Before connection, be sure to turn off both the projector and computer devices.
Read the manual which comes with each device thoroughly.
Connection to Macintosh
Use the supplied Personal computer connection cable and the supplied conversion adapter for Mac.
Desktop type
When connecting an audio output terminal such as a computer sound
source to the projector, connect to the AUDIO terminal using the
supplied audio cable.
Other...

Connecting to Various Devices (Cont.)
Connecting the Power Cord (Supplied)
After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the\
 MAIN
POWER switch yet.
Insert the supplied power cord
into the power input terminal (AC
IN ~) of the projector.
AC IN ~
Power cord (supplied)Insert the plug of the supplied
power cord into a wall outlet.
To prevent fire and electric shock, observe the following:
When you do not use devices, pull out their power...

Connecting to Various Devices (Cont.)
When Turning On the Devices Connected to the Projector
Turn on the switches of the projector and the devices connected in the following order.Skip over unconnected devices if there is any.
Power switch of the monitor of the computer which provides input to the projector 
Peripheral devices of the computer which provides input to the projector
(Hard disk, magneto optical disk, scanner, etc.)
Power switch of AV devices which provide input to the projector
Projector...

Basic Operations
Projector’s buttons
STAND BY indicator
OPERATE indicator
OPERATE button
Remote control unit
The following describes the basic procedure for normal use of
the projector.
1. Turning on the Power
Turn on the MAIN POWER switch.
ON: The main power turns on and the STAND BY
indicator comes on.
Projector’s indicator
MAIN POWER switch
Press the OPERATE button.
(Or press the remote control’s
OPERATE button for one second
or more.)
The OPERATE indicator comes on.
About 30 seconds after the MAIN...

Basic Operations (Cont.)
Projector’s buttons2. Selecting the video input to be projected
VIDEO button
COMPUTER button
Press the VIDEO button or the COMPUTER button to
switch the input.
Each time you press either button, the selected input changes as
follows.
When you press VIDEO:
Y/C VIDEOY,PB/B-Y,PR/R-Y
When you press COMPUTER:
COMPUTER 1
Remote control unit COMPUTER 2
Projector
Screen display
Remote control unit
COMPUTER button
VIDEO button
* When the input is switched, the line display (ex. VIDEO) and...

Basic Operations (Cont.)
Remote control unit
FOCUS (+/-) buttons
4. Adjusting focus
Adjust focus with the remote control’s FOCUS
buttons.
To focus on farther points:
Press the FOCUS (+) button.
To focus on nearer points:
Press the FOCUS (-) button.
Remote control unit
VOL. (+/-) buttons
Focus adjustment can also be made on the setting menu. For operating the
setting menu, refer to “Making Basic Settings” on page 33.
5. Adjusting sound volume
Adjust sound volume with the remote control’s VOL.
buttons....