Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

ENGLISH – 41
Basic Operation
3. Press ENTER.
The “RENAME” screen will be displayed.
4. Use ▲▼◄► to select the 
characters and numerals one 
by one, and press ENTER to set 
them.
5.  Once the name has been 
changed, press ▲▼◄► to 
select “OK” and then press 
ENTER.
After registration, the “REGISTERED SIGNAL 
STATUS” screen is restored.
If you would like to cancel the changes to the 
signal name, use ▲▼◄► to select “CANCEL” 
and then press ENTER. The changes will be 
cancelled and the displayed signal name...

42 – ENGLISH
2. Press ▲▼◄► to select the SUB 
MEMORY number stored in the 
“SUB MEMORY LIST”.
3. Press ENTER.
A “Change registered signals” screen will 
appear.
4. Press ENTER.
Note
To rename a registered signal, perform steps 4 and 
5 on 
page 41.
Procedure to switch to sub 
memory
1. Press ◄► on normal screen 
(menu is not displayed).
The screen will show a list of the sub-memory 
registered for the currently entered signal.
2. Press ▲▼◄► to select the 
sub-memory signal to be 
switched in the “SUB...

ENGLISH – 43
Basic Operation
 
Using the SHUTTER 
function
If the projector is not used for a certain period of 
time during the meeting intermission, for example, a 
shutter mode is available that allows the user to hide 
images temporarily.
1. Press SHUTTER on the remote 
control or the main unit.
The image is turned off.
2.  Press SHUTTER again.
The image comes back.
  On-screen display 
function
This turns the on-screen display function on and off.
1. Press ON SCREEN on the 
remote control.
•
•...

44 – ENGLISH
  Automatic adjustment 
(AUTO SETUP)
The automatic setup function can be used to 
automatically adjust the resolution, clock phase and 
picture position when analog RGB signals consisting 
of bitmap images such as computer signals are being 
input, or to automatically adjust the picture position 
when DVI-D signals are being input. (Automatic 
adjustment cannot be carried out when moving 
pictures are being input.)
It is recommended to supply images with a bright 
white frame at the...

ENGLISH – 45
Basic Operation
Changing the picture 
aspect ratio
You can change the aspect ratio for projected pictures 
to match the input signal.
1.  Press ASPECT on the remote 
control.
The setting will change as follows each time 
ASPECT is pressed.
*1: PT-D10000U Only
*2: PT-DW10000U Only
Note
Some aspect ratios may not be available for 
selection depending on the input signal. Refer to 
“Adjusting the aspect ratio” for details. (
p. 57) •
•
VID AUTO (PRIORITY)
S1 AUTO
VID AUTO
HV FIT
H FIT*2...

46 – ENGLISH
Menus are extensively used for configuring, 
adjusting or reconfiguring the projector.
Some menu items may not be valid for certain 
signal formats applied to the projector. 
The menu items that cannot be adjusted or used 
are shown in gray characters, and they cannot 
be selected. •
MENUPress to display the 
MAIN MENU screen.
Select the item to be 
set.
Press to display the 
menu of the desired item.
MENUPress to display the 
MAIN MENU screen.
Select the item to be 
set.
Press to display...

ENGLISH – 47
Basic Operation
POSITION (pp. 56-59)
ADVANCED MENU (
pp. 60-65)
DISPLAY LANGUAGE (
p. 66)
OPTION1 (
pp. 67-74)
■
■
■
■
SUB MENU item
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
SUB MENU item
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
SUB MENU item
DIGITAL CINEMA REALITY
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING
FRAME DELAY
RASTER POSITION
SUB MENU item
DIGITAL CINEMA REALITY
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING
FRAME DELAY
RASTER POSITION
SUB MENU item
ENGLISH
DEUTSCH...

48 – ENGLISH
  Using the menu screens
1. Press MENU.
The “MAIN MENU” appears on the screen.
2. Press ▲▼ to select the desired 
item.
The item that is currently selected will appear in 
yellow.
3.  Press ENTER to establish your 
selection.
The submenu for the selected option will now 
open. •
•
•
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY LANGUAGE
  OPTION1
  OPTION2
  TEST PATTERN
  SIGNAL LIST
  NETWORK
  SECURITY
    MENU SELECT
    SUB MENU
ENTER
MAIN MENU
  PICTURE
  POSITION
  ADVANCED...

ENGLISH – 49
Basic Operation
You can adjust pictures to suit your preference.
Some menu items may not be valid for certain 
signal formats applied to the projector. •
MENUPress to display the 
MAIN MENU screen.
Press to select 
“PICTURE”.
Press to display the 
“PICTURE” menu.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“PICTURE”.
Press to display the 
“PICTURE” menu.
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY LANGUAGE
  OPTION1
  OPTION2
  TEST PATTERN
  SIGNAL LIST...

50 – ENGLISH
  Adjusting Contrast
This adjusts the contrast for picture colors.
1. Press ▲▼ to select “CONTRAST”.
2. Press ENTER.
The “CONTRAST” individual adjustment screen 
will be displayed.
3. Press ◄► to adjust the level.
Attention
If you need to adjust the “BRIGHTNESS,” it should 
be adjusted before other adjustments are made.
  Adjusting Brightness
This adjusts the brightness of dark (black) areas of the 
pictures.
1. Press ▲▼ to select “BRIGHTNESS”.
•
•
PICTURE
PICTURE MODE
  CONTRAST...