Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

ENGLISH – 51
Basic Operation
 
Adjusting Tint
This adjusts skin tones in the pictures.
1. Press ▲▼ to select “TINT”.
2. Press ENTER.
The “TINT” individual adjustment screen will be 
displayed.
3. Press ◄► to adjust the level.
 
Adjusting the color 
temperature
This is used to adjust the pictures if white areas 
appear bluish or reddish.
Carry out this adjustment while the signals to be 
adjusted are being projected.
1. Press ▲▼ to select “COLOR 
TEMP.”.
•
•
PICTURE
PICTURE MODE
  CONTRAST
  BRIGHTNESS...

52 – ENGLISH
8. Press ◄► to adjust the level.
Note
All colors will not be displayed properly unless 
adequate adjustment is made. If the adjustment 
does not look suitable, you can press DEFAULT to 
return the setting for the selected item only to the 
factory default setting.
The color temperature cannot be adjusted for the 
internal test pattern (
p. 83). Be sure to project the 
input signal when adjusting the color temperature.
  Gamma setting
This switches the gamma mode.
1. Press ▲▼ to select...

ENGLISH – 53
Basic Operation
 
Noise reduction setting
This can be used to adjust pictures if they contain 
interference as a result of poor quality of the input 
signal.
1. Press ▲▼ to select “NOISE 
REDUCTION”.
2. Press ◄► to switch “NOISE 
REDUCTION”.
The setting will change as follows each time 
◄► is pressed.
 
Dynamic iris setting
Pictures with the optimum contrast will be displayed 
by automatically providing aperture compensation and 
signal compensation to suit the pictures concerned.
1. Press...

54 – ENGLISH
  Registering the picture 
mode settings as presettings
The picture settings that have been made in the 
PICTURE MODE screen can be registered.
Select “PICTURE MODE” in the “PICTURE” screen 
to carry out this operation.
1. Press ENTER.
A confirmation screen will appear.
2 Press ◄► to select “OK”.
3. Press ENTER.
Note
If the registered picture mode is selected after 
registering the picture mode settings as presettings, 
the new signals will be displayed with the registered 
adjustments....

ENGLISH – 55
Basic Operation
5. Press ▲▼ to select  “COLOR”.
6.  Press DEFAULT on the remote 
control to restore the factory 
default.
7.  Follow the same procedure 
(steps 5-6) to restore the factory 
default for “TINT”, “COLOR 
TEMP.” and “GAMMA”.
Note
sRGB is only enable when RGB signals are being 
input. •
PICTURE
PICTURE MODE
  CONTRAST
  BRIGHTNESS
  COLOR
  TINT
  COLOR TEMP.
  GAMMA
  SHARPNESS
  NOISE REDUCTION
  DYNAMIC IRIS
SYSTEM SELECTOR
    MENU SELECT
    ADJUSTNATURAL
0
0
10
1
DEFAULT...

56 – ENGLISH
You can adjust the position as required.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“POSITION”.
Press to display the 
“POSITION” menu.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“POSITION”.
Press to display the 
“POSITION” menu.
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY LANGUAGE
  OPTION1
  OPTION2
  TEST PATTERN
  SIGNAL LIST
  NETWORK
  SECURITY
    MENU SELECT
    SUB MENU
ENTER
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY...

ENGLISH – 57
Basic Operation
 
Adjusting the aspect ratio
This changes the aspect ratio of the pictures.
1. Press ▲▼ to select  “ASPECT”.
2. Press ◄► to switch “ASPECT”.
The setting will change as follows each time 
◄► is pressed.
DEFAULT:
Pictures are displayed without changing the aspect 
ratio of the input signals.
THROUGH:
Pictures are displayed without changing the 
resolution of the input signals.
16:9
*1:
When standard signals are being input*3, pictures 
are displayed with the aspect ratio...

58 – ENGLISH
  Adjusting the zoom ratio
This adjusts the size of the projected pictures.
1. Press ▲▼ to select  “ZOOM”.
2. Press ENTER.
The “ZOOM” screen will be displayed.
3. Press ▲▼ to select  “MODE”.
4. Press ◄► to switch “MODE”.
The setting will change as follows each time 
◄► is pressed.
INTERNAL:
Enlarges the size of the pictures to within the 
default aspect ratio.
FULL:
Enlarges the pictures using the whole of the 
display area.
5. Press ▲▼ to select  
“INTERLOCKED”.
•
•
•
•
ENTER
POSITION...

ENGLISH – 59
Basic Operation
• 
Keystone distortion 
correction
Keystone distortion can be corrected only along either 
horizontal bound of the picture.
1. Press ▲▼ to select  
“KEYSTONE”.
2. Press ENTER.
The “KEYSTONE” screen will be displayed.
3. Press ◄► to adjust the 
“KEYSTONE”.
The value changes from -127 to 127.
4. Press ▲▼ to select  “SUB 
KEYSTONE” or “LINEARITY”.
5. Press ◄► to adjust “SUB 
KEYSTONE” or “LINEARITY”
The value changes from -127 to 127. •
•
•
ENTER
POSITION
SHIFT
ASPECT
ZOOM
CLOCK...

60 – ENGLISH
Fine settings are possible.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“ADVANCED MENU”.
Press to display the 
“ADVANCED MENU” 
menu.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“ADVANCED MENU”.
Press to display the 
“ADVANCED MENU” 
menu.
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY LANGUAGE
  OPTION1
  OPTION2
  TEST PATTERN
  SIGNAL LIST
  NETWORK
  SECURITY
    MENU SELECT
    SUB MENU
ENTER
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU...