Panasonic Dmc Cm1 Basic Owners Manual

							Preparation
11(ENG) SQT0433
Standard Accessories
Check that all the accessories are supplied before using this unit.
Product numbers correct as of March 2015. These may be subject  to change.
≥microSD Memory Card, microSDHC Memory Card and microSDXC Memory  Card are 
indicated as  microSD card  in the text.
≥ microSIM card and microSD card are optional.
≥ If accessories are lost, custome rs can visit us at www.panasonic.com/support
 for further 
information about obtaining replacement parts. AC Adaptor
VSK0825
DMC-CM1P-SQT0433_eng.book  11 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
12SQT0433 (ENG)
Names and Functions of Main Parts
17810
2345
6
11131415
12
19
20 21
16 221718
9
1 Shutter button (P32)
2 Camera selector switch (P29)
3 Flash/AF Assist Lamp
4 [ ]  button (P19)
5 [ ]/[ ] buttons
6Speaker
7 NFC antenna
8 Control ring (P33)
9 Lens front ring (Diameter: 37 mm)
10 Outward facing camera (P29) 11 Microphone
12 microUSB terminal (P18)
13 Ringtone lamp/Charging lamp 
(P18)
14Light sensor/Proximity sensor
Do not cover the sensor area with 
your hand or paste stickers over it in 
order to prevent incorrect operation of 
the sensor.
15 Display (P20)
16 Earpiece
17 Earphone terminal (P13)
18 Inward facing camera
19 microSIM card slot (P14)
20 microSD card slot (P17)
21 Nameplate
Stowable nameplate.
Contains information such as the 
mobile identification number.
22 Mouthpiece/Microphone
DMC-CM1P-SQT0433_eng.book  12 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
13(ENG) SQT0433
You can use a headset (optional) to listen to music or watch videos.
If the headset (optional) has a microphone, you can also use it  to talk on the 
phone.
Stereo headset (optional)
≥ Check that the headset (optional) plug is completely inserted i nto the earphone 
terminal.
≥ Excessive sound pressure from earphones and headphones can caus e hearing loss.
≥ To prevent possible hearing damage, do not listen at high volum e levels for long 
periods.
≥ Being unable to hear sounds in your environment may lead to acc idents.
DMC-CM1P-SQT0433_eng.book  13 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
14SQT0433 (ENG)
Inserting/Removing the microSIM card 
(optional)
A microSIM card is an integrated circuit that stores the customer’s phone number 
and other information.
Calls and messages (SMS) cannot be sent or received unless the  microSIM card 
is inserted.
If you have inserted/removed the microSIM card, do not delibera tely touch or 
damage the IC terminals.
1Open the card slot cover with the control ring face of this uni t 
facing upwards.
2Hold the hooks of the tray with your fingertips and pull it out  
horizontally.
3Mount the microSIM card on the tray  C with the IC face  A on 
top.
≥ Take note of the notch  B on the microSIM card and mount it in the correct direction.
4Check the orientation of this unit and insert the tray 
horizontally into the slot of the microSIM card.
5Close the card slot cover.
DMC-CM1P-SQT0433_eng.book  14 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
15(ENG) SQT0433
∫About the mobile identification numberThis unit has a specific mobile identification number  A.
The mobile identification number is verified as follows.
To verify the number on-screen:
1From the Home screen  > [ ]  > [ ].
2[About phone]  > [Status]  > check the [IMEI] item.
To verify the number by checking the 
nameplate:1Open the card slot cover.
2Remove the microSIM card tray.3Pull the nameplate towards you.
≥ Be careful as the nameplate may be damaged 
if it is pulled too hard.
∫ About the FCC IDThe FCC ID B is verified as follows.
1Open the card slot cover.2Remove the microSIM card tray.
3Pull the nameplate towards you.
≥Be careful as the nameplate may be damaged 
if it is pulled too hard.
4Check the reverse side of the nameplate. ≥Keep the microSIM Card out of reach of children to prevent swal lowing.
≥ Keep the microSIM Card Tray out of reach of children to prevent  swallowing.
(Reverse side)
DMC-CM1P-SQT0433_eng.book  15 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
16SQT0433 (ENG)
About the Built-in Memory/the microSD 
Card (optional)
About Built-in Memory
≥Memory size: Approx. 10 GB
≥ The access time for the built-in memory may be longer than the  access time for a 
microSD card.
≥ You can copy the recorded pictures to a microSD card.  (P37)
About microSD cards that can be used with this unit
The following microSD cards which conform to the SD standard ca n be used 
with this unit.
(These cards are indicated as  microSD card in the text.)
≥microSD Memory Card (64 MB to 2 GB)
≥ microSDHC Memory Card (4 GB to 32 GB)
≥ microSDXC Memory Card (64 GB to 128 GB)
≥ Check the corresponding manufacturer, capacity and other latest compatibility 
information from the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note that this does not guarantee compatibility with all operat ions.
≥ microSDHC Memory Cards and microSDXC Memory Cards can be used o nly with 
their compatible devices.
≥ A message prompting to format the microSD card may be displayed  when connecting 
the microSD card to other devices, but do not format.
DMC-CM1P-SQT0433_eng.book  16 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
17(ENG) SQT0433
∫About the motion picture recording and SD speed class
∫ Inserting/Removing the microSD card
1
Open the card slot cover, ensure that the connection terminal o f the microSD card 
is facing down, and insert it firmly in the correct direction u ntil it makes a “click” 
sound.
A Do not touch the connection terminals of the microSD card.
≥ To remove, push in the card until it makes a “click” sound and  then pull it out straight.
2Close the card slot cover. According to the [Rec Quality] (P36) of a motion picture, the required microSD card 
differs. Use a microSD card tha t meets the following rating of the SD Speed Class.
≥ SD Speed Class is the speed standard regarding continuous writi ng. Check via the 
label on the microSD card, etc.
≥ The SD speed class represents the level of performance of micro SD cards. The SD 
speed class does not serve as a guarantee of performance for al l operations.
[Rec Quality] SD Speed class Label example
FHD/HD/VGA/1:1 Class 4 or higher
4K Class 10
≥ The data on the built-in memory or the microSD card may be dama ged or lost due to 
electromagnetic waves, static electricity or breakdown of this  unit or the microSD card. 
We recommend storing important data on a PC etc.
≥ Keep the microSD Card out of reach of children to prevent swall owing.
DMC-CM1P-SQT0433_eng.book  17 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Preparation
18SQT0433 (ENG)
Charging
Connect the unit and AC adaptor to charge.≥The battery is not charged when this unit is shipped. Charge th e battery before use.
≥ For details on charging time, refer to P54 .
1Open the microUSB terminal cover, check the direction of the AC 
adaptor cable terminal, and insert it into the microUSB termina l.
2Insert the AC adaptor power plug into the power outlet.
∫When charging is complete
1
Remove the AC adaptor power plug from the power outlet.2Remove the AC adaptor cable terminal from the unit.
≥ The unit and AC adaptor may become warm while charging, however  this is not 
a malfunction.
≥ Remove the AC adaptor from the power outlet after completely ch arging the 
battery in order to save power and maintain battery performance .
≥ The shape of the AC adaptor power plug and power outlet may dif fer depending on 
each country/region.
≥ Do not use any other AC adaptors except the supplied one.
≥ Do not leave any metal items (such as clips) near the contact a reas of the power 
plug.
≥ When you start charging an empty  battery, the charging lamp may flash. This is not a 
malfunction. The charging lamp stops flashing and lights up aft er the battery is 
charged for a while.
To power outlet
AC adaptor
microUSB terminal
Charging lamp
On: Charging.
Off: Charging has completed.
DMC-CM1P-SQT0433_eng.book  18 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Basic
19(ENG) SQT0433
Turning the unit on/off
Turn on the unit by pressing [ ] for 
2 seconds or more.
≥The lock screen will be displayed after a short time.
≥ The default settings screen will be  displayed when you turn the 
unit on for the first time.  (P25)
≥ Press [ ] to enter/release sleep mode, when the unit is turned 
on.
∫ To turn the unit offPress [ ] for 1 second or more  > [Power off]  > [OK].
∫ To restartPress [ ] for 1 second or more  > [Reboot]  > [OK].
Slide [ ] until the guide (white line 
on the outer circumference)  A.
≥If the [Screen lock] settings have been changed, 
use the method configured to release the lock.
Release the lock screen
A
DMC-CM1P-SQT0433_eng.book  19 ページ  ２０１５年４月１３日　月曜日　午後１時１分 
						

							Basic
20SQT0433 (ENG)
Using the touch screen
The unit features a touch screen, which you can operate by touching directly with 
your fingers.
≥ Peel off the sheet pasted to the touch screen when first bought before use.
≥ The touch screen is designed to be lightly touched with a finge r.
Do not press the touch screen strongly with your finger or pres s objects with sharp tips (claws/
ball point pens/pins etc.) against it.
≥ The touch screen may not work even when touched in the followin g cases. Please note that 
they may also result i n incorrect operations.
– Operating with gloves on your hand
– Operating with your fingertips
– Operating with foreign objects on top of the operating surface
– Operating with a protective s heet, seal, etc. pasted on top
– Operating with the touch screen wet
– Operating with your fingers wet with sweat or water
Ta p p i n gTap an item or icon to select 
it.Double-tappingTap the touch screen 
quickly two times when you 
want to zoom in and out of 
webpages, etc.
Tapping and holdingTap an item or icon without 
releasing your finger.
Use this to display a context 
menu.FlickingMoving your finger quickly 
across the touch screen will 
move back and forth 
through numerous pictures.
DraggingTap an item or icon without 
releasing your finger and 
slide it.ScrollingFlick/drag your finger 
around the screen to 
display a hidden area.
PinchingWhen displaying a webpage 
or picture, use two fingers 
to push the screen apart 
and zoom in (pinch out), or 
bring them together to zoom 
out (pinch in).∫ Switching between vertical 
and horizontal viewing modes
The unit switches the screen between 
vertical and horizontal viewing modes 
depending on its motion sensor that 
can detect the unit’s direction and 
movement.
DMC-CM1P-SQT0433_eng.book  20 ページ  ２０１５年４月１３日　月曜日　午後１時１分