Panasonic Dmc Fx65 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fx65 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
- 131 -
Advanced (Playback)
You can delete or change the information relating to Face Recognition for the selected
picture.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P21)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
[FACE REC EDIT]
Press 3/4...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-130.png "Page 131
- 131 -
Advanced (Playback)
You can delete or change the information relating to Face Recognition for the selected
picture.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P21)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
[FACE REC EDIT]
Press 3/4...")
- 131 - Advanced (Playback) You can delete or change the information relating to Face Recognition for the selected picture. Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P21) Note •Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be categorised using Face Recognition in [CATEGORY PLAY]. •You cannot edit the Face Recognition information of protected pictures. [FACE REC EDIT] Press 3/4...
Page 132
![Page 132
Advanced (Playback)
- 132 -
You can copy data of pictures you have shot from the built-in memory onto a card, from a
card into the built-in memory or from a card into the dedicated clipboard folder.
•
When copying clipboard pictures onto a card, select [COPY] on the clipboard playback menu.
(P107)
Select [COPY] on the [PLAYBACK] Mode menu. (P21)
Press 3/4 to select the copy destination and then
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES],...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-131.png "Page 132
Advanced (Playback)
- 132 -
You can copy data of pictures you have shot from the built-in memory onto a card, from a
card into the built-in memory or from a card into the dedicated clipboard folder.
•
When copying clipboard pictures onto a card, select [COPY] on the clipboard playback menu.
(P107)
Select [COPY] on the [PLAYBACK] Mode menu. (P21)
Press 3/4 to select the copy destination and then
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES],...")
Advanced (Playback) - 132 - You can copy data of pictures you have shot from the built-in memory onto a card, from a card into the built-in memory or from a card into the dedicated clipboard folder. • When copying clipboard pictures onto a card, select [COPY] on the clipboard playback menu. (P107) Select [COPY] on the [PLAYBACK] Mode menu. (P21) Press 3/4 to select the copy destination and then press [MENU/SET]. Press 2/1 to select the picture and then press [MENU/SET]. Press 3 to select [YES],...
Page 133
- 133 - Connecting to other equipment Connecting to other equipmentConnecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. •You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way of doing this. •Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it. Preparations:...
Page 134
![Page 134
Connecting to other equipment
- 134 -
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pi ctures to any different folder on
the PC. Press 3/4 to select [PC], and then press [MENU/
SET].
•If [USB MODE] (P28) is set to [PC] in the [SETUP] menu in
advance, the camera will be automat ically connected to the PC
without displaying the [USB MODE] selection screen. Since there
is no need to set this each time you connect to the PC, it is
convenient.
•When...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-133.png "Page 134
Connecting to other equipment
- 134 -
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pi ctures to any different folder on
the PC. Press 3/4 to select [PC], and then press [MENU/
SET].
•If [USB MODE] (P28) is set to [PC] in the [SETUP] menu in
advance, the camera will be automat ically connected to the PC
without displaying the [USB MODE] selection screen. Since there
is no need to set this each time you connect to the PC, it is
convenient.
•When...")
Connecting to other equipment - 134 - Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pi ctures to any different folder on the PC. Press 3/4 to select [PC], and then press [MENU/ SET]. •If [USB MODE] (P28) is set to [PC] in the [SETUP] menu in advance, the camera will be automat ically connected to the PC without displaying the [USB MODE] selection screen. Since there is no need to set this each time you connect to the PC, it is convenient. •When...
Page 135
![Page 135
- 135 -
Connecting to other equipment
∫Disconnecting the USB connection cable safely
•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•This unit cannot stand upright when the AC adaptor is connected. When placing it on a surface
and operating it, we recommend placing it on a soft cloth.
•Turn the camera off before...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-134.png "Page 135
- 135 -
Connecting to other equipment
∫Disconnecting the USB connection cable safely
•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•This unit cannot stand upright when the AC adaptor is connected. When placing it on a surface
and operating it, we recommend placing it on a soft cloth.
•Turn the camera off before...")
- 135 - Connecting to other equipment ∫Disconnecting the USB connection cable safely •Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware. Note •This unit cannot stand upright when the AC adaptor is connected. When placing it on a surface and operating it, we recommend placing it on a soft cloth. •Turn the camera off before...
Page 136
![Page 136
Connecting to other equipment
- 136 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started from the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Set the mode dial to anything except [ ¨].
A USB connection...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-135.png "Page 136
Connecting to other equipment
- 136 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started from the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Set the mode dial to anything except [ ¨].
A USB connection...")
Connecting to other equipment - 136 - Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started from the camera’s LCD monitor. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures from the built-in memory. Perform the print quality and other settings at the printer before printing the pictures. Set the mode dial to anything except [ ¨]. A USB connection...
Page 137
- 137 - Connecting to other equipment Note •This unit cannot stand upright when the AC adaptor is connected. When placing it on a surface and operating it, we recommend placing it on a soft cloth. •Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. •Turn the camera off before connecting or disconnecting the AC adaptor (optional).•Before inserting or removing a card, turn the camera off, and disconnect the...
Page 138
![Page 138
Connecting to other equipment
- 138 -
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P126)
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press [MENU/
SET].
•If the print check screen has appeared, select [YES], and print
the pictures.
ItemDescription of settings
[MULTI SELECT] Multiple pictures are printed at one time.
•Press
3/4/ 2/1 to select the pictures, and then When [DISPLAY] is
pressed, [é] appears on the pictures...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-137.png "Page 138
Connecting to other equipment
- 138 -
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P126)
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press [MENU/
SET].
•If the print check screen has appeared, select [YES], and print
the pictures.
ItemDescription of settings
[MULTI SELECT] Multiple pictures are printed at one time.
•Press
3/4/ 2/1 to select the pictures, and then When [DISPLAY] is
pressed, [é] appears on the pictures...")
Connecting to other equipment - 138 - ¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P126) Selecting multiple pictures and printing them Press 3. Press 3/4 to select an item and then press [MENU/ SET]. •If the print check screen has appeared, select [YES], and print the pictures. ItemDescription of settings [MULTI SELECT] Multiple pictures are printed at one time. •Press 3/4/ 2/1 to select the pictures, and then When [DISPLAY] is pressed, [é] appears on the pictures...
Page 139
![Page 139
- 139 -
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
“Selecting a single picture and printing it” and in step 3 of the
“Selecting multiple pictures and printing them” procedures.
•
When you want to print pictures on a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [ {]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
•When [PRINT...](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-138.png "Page 139
- 139 -
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
“Selecting a single picture and printing it” and in step 3 of the
“Selecting multiple pictures and printing them” procedures.
•
When you want to print pictures on a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [ {]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
•When [PRINT...")
- 139 -
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
“Selecting a single picture and printing it” and in step 3 of the
“Selecting multiple pictures and printing them” procedures.
•
When you want to print pictures on a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [ {]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
•When [PRINT...
Page 140
![Page 140
Connecting to other equipment
- 140 -
•Paper sizes not supported by the printer will not be displayed.
[PAPER SIZE]
ItemDescription of settings
{ Settings on the printer are prioritized.
[L/3.5 qk5q]
89 mmk127 mm
[2L/5 qk7q] 127 mmk178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
[A3] 297 mmk420 mm
[10 k15cm] 100 mmk150 mm
[4 qk6 q] 101.6 mmk152.4 mm
[8 qk10 q] 203.2 mmk254 mm
[LETTER] 216 mmk279.4 mm
[CARD SIZE] 54 mmk85.6 mm](http://img.usermanuals.tech/thumb/58/65594/w300_dmc-fx65_en_adv_om_d-139.png "Page 140
Connecting to other equipment
- 140 -
•Paper sizes not supported by the printer will not be displayed.
[PAPER SIZE]
ItemDescription of settings
{ Settings on the printer are prioritized.
[L/3.5 qk5q]
89 mmk127 mm
[2L/5 qk7q] 127 mmk178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
[A3] 297 mmk420 mm
[10 k15cm] 100 mmk150 mm
[4 qk6 q] 101.6 mmk152.4 mm
[8 qk10 q] 203.2 mmk254 mm
[LETTER] 216 mmk279.4 mm
[CARD SIZE] 54 mmk85.6 mm")
Connecting to other equipment
- 140 -
•Paper sizes not supported by the printer will not be displayed.
[PAPER SIZE]
ItemDescription of settings
{ Settings on the printer are prioritized.
[L/3.5 qk5q]
89 mmk127 mm
[2L/5 qk7q] 127 mmk178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
[A3] 297 mmk420 mm
[10 k15cm] 100 mmk150 mm
[4 qk6 q] 101.6 mmk152.4 mm
[8 qk10 q] 203.2 mmk254 mm
[LETTER] 216 mmk279.4 mm
[CARD SIZE] 54 mmk85.6 mm