Panasonic Dmc Fx65 Operating Instructions Manual

							- 111 -
Advanced (Playback)
∫Changing the slide show settings
You can change the settings for sl ide show playback by selecting 
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when 
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
•[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures 
are played back with the recommended effects in each category.
•[EFFECT] is set to [OFF] when playing a slide show with motion pictures only.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.•[AUDIO] can be set only when [OFF] has been selected as the [MUSIC] setting. Audio will be 
played along with the still picture with audio by setting the [AUDIO] to [ON].
Note
•Music effects cannot be played back simultaneously with motion pictures or still pictures with 
audio.
•It is not possible to add new music effects.
ItemSettings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] ON/OFF
[MUSIC] ON/OFF
[AUDIO] ON/OFF 
						

							Advanced (Playback)
- 112 -
[PLAYBACK] Mode: ¸
Selecting Pictures and Playing them Back 
([CATEGORY PLAY]/[FAVORITE PLAY])
This mode allows you to search images by Scene Mode or other categories (such as 
[PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the 
categories. You can then play back the pictures in each category.
Perform steps 1 and 2 on page  109.
Press  3/4 to select [CATEGORY PLAY], and then press [MENU/SET].
.
[CATEGORY PLAY]
Press  3/4/2/ 1 to select the category and then 
press [MENU/SET] to set.
•If a picture is found in a category, the category icon turns blue.•It may take time to search the picture files if there are a lot on the 
card or the built-in memory.
•If you press [ ‚] while searching, the searching will stop halfway.•Pictures are sorted into the categories shown below. 
						

							- 113 -
Advanced (Playback)
¢ 1 Press  3/4 /2/ 1 to select the person to play back and then press [MENU/SET].Face Recognition may not be possible or may not recognize faces correctly 
even for registered faces, depending on  the facial expression and environment.
¢ 2 The travel dates of images in the clipboard folder are not categorized.
[CATEGORY]Recording information 
e.g. Scene Modes[CATEGORY]Recording information  e.g. Scene Modes
[FACE RECOG.]
¢ 1[SPORTS], [PARTY], 
[CANDLE LIGHT], 
[FIREWORKS], [BEACH], 
[SNOW], 
[AERIAL PHOTO]
*
[PORTRAIT], 
[i-PORTRAIT], 
[SOFT SKIN], 
[TRANSFORM], 
[SELF PORTRAIT], 
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[BABY1]/[BABY2],
[i-BABY]
,
[SCENERY], 
[i-SCENERY], [SUNSET], 
[AERIAL PHOTO]Î[BABY1]/[BABY2], 
[i-BABY]
í[PET]
.
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[NIGHT SCENERY], 
[i-NIGHT SCENERY], 
[STARRY SKY]1[FOOD]
[TRAVEL DATE]
¢2
Í[MOTION PICTURE] 
						

							Advanced (Playback)
- 114 -
You can play back the pictures you have set as [FAVORITE] (P126) (Only when 
[FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]).
Perform steps 1 and 2 on page  109.
Press  3/4 to select [FAVORITE PLAY], and then press [MENU/SET].
Note
•You can use only [ROTATE DISP.], [PRINT SET], [PROTECT] or [AUDIO DUB.] in the 
[PLAYBACK] menu.
[FAVORITE PLAY] 
						

							- 115 -
Advanced (Playback)
[PLAYBACK] Mode: ¸
Playing Back Motion Pictures/Pictures with Audio
Press 2/1 to select a picture with a motion picture 
icon (such as [ ]), and then press  3 to play back.
AThe motion picture recording time
B Motion picture icon
C Motion picture playback icon
•After playback starts, the elapsed playback time is displayed on the 
upper right of the screen.
For example, 8 minutes and 30 seconds is displayed as [8m30s].
∫Operations performed during motion picture playback
The cursor displayed during playback is the same as  3/4 /2/ 1.
A Play/Pause
B Stop
C Fast rewind, Frame-by-frame rewind
¢
DFast forward, Frame-by-frame forward¢
¢ These operations can be performed only in the Pause Mode.
E Reduce volume level
F Increase volume level
Motion pictures
ACBABC 
						

							Advanced (Playback)
- 116 -
Note
•Sound can be heard through the speaker. Refer to [VOLUME]  (P24) for information about how 
to adjust the volume in the [SETUP] menu.
•The file format that can be played back with this camera is QuickTime Motion JPEG.•Please note that the bundled software includes QuickTime to play back motion picture files 
created with the camera on the PC.
•Some QuickTime Motion JPEG files recorded by a PC or other equipment may not play back 
on the camera.
•If you play back motion pictures that have been recorded with other equipment, the picture 
quality may deteriorate or the pictures may not play back.
•Pictures with audio recorded with other equipment may not play back on this unit.•When using a high capacity card, it is possible  that fast rewinding may be slower than usual.
Pictures with audio
Press  2/1 to select a picture with the audio icon [ ] 
and then press  3 to play back.
AAudio icon•Refer to [AUDIO REC.]  (P102) and [AUDIO DUB.]  (P130) for 
information about how to create still pictures with audio.
A 
						

							- 117 -
Advanced (Playback)
[PLAYBACK] Mode: ¸
Using the [PLAYBACK] Mode menu
You can use various functions in Playback Mode to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [TRIMMING] or [LEVELING], a new edited picture is created. A 
new picture cannot be created if there is no free space on the built-in memory or the card so we 
recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2009.•If you take pictures after setting the travel destination in [WORLD TIME], the pictures are 
displayed by the dates at the travel destination in calendar playback.
 [CALENDAR]
Select [CALENDAR] on the [PLAYBACK] Mode menu.  (P21)
•You can also rotate the zoom lever several times towards [ L] (W) to display the 
calendar screen.  (P43)
Press 3/4/2/ 1 to select the date to be played 
back.
3 /4 : Select the month
2 /1 : Select the date
•
If there were no pictures recorded during a month, that month is 
not displayed.
Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ‚] to return to the calendar screen.
Press  3/4/2/ 1 to select a picture and then press [MENU/SET].
•The picture that was selected will appear. 
						

							Advanced (Playback)
- 118 -
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P120). (Only alphabetic characters and symbols can be 
entered.)
Names set in [BABY1]/[BABY2] and [PET] in Scene Mode or [LOCATION] in Travel Date 
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] Mode menu.  (P21)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/2/ 1 to select text and then press 
[MENU/SET] to register.
•Press [DISPLAY] to switch text between [A] (capitals), [a] (small 
case) and [&/1] (special characters and numbers).
•The entry position cursor can be moved left and right with the 
zoom lever.
•To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
•To stop editing at any time during text entry, press [ ‚].•A maximum of 30 characters can be entered. (Maximum of 9 characters when setting 
names in [FACE RECOG.])
Press  3/4/2/ 1 to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
 [TITLE EDIT]
Select the picture, and then press 
[MENU/SET] to set.
•[ ’] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures.
•
The setting is canceled when [DISPLAY] is pressed again. 
						

							- 119 -
Advanced (Playback)
∫Delete the title
[SINGLE] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2Press [ ‚].3Press [MENU/SET] to close the menu.
[MULTI] setting
1Select [EXIT] without entering text in step 4, and then press [MENU/SET].2Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.•The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene Mode or 
[LOCATION] in Travel Date can also be registered by using the operation in steps 4 and 
following.
•The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [LOCATION] in Travel Date 
and [TITLE EDIT] cannot be registered at the same time.
•You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the 
CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use [TITLE EDIT] for the following types of pictures:–Motion pictures–Protected pictures–Pictures recorded with other equipment 
						

							Advanced (Playback)
- 120 -
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] Mode menu.  (P21)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/2/ 1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE]  (P65)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for pictures that have already been recorded 
with text in [FACE RECOG.] or [BABY1]/[BABY2] and [PET] name settings in Scene 
Mode, [LOCATION] in Travel Date or [TITLE EDIT].
  [TEXT STAMP]
Select the picture, and then press 
[MENU/SET] to set.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set.
•
The setting is canceled when [DISPLAY] 
is pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures.
[W/OTIME] : Stamp the year, month and date.
[WITHTIME] : Stamp the year, month, day, hour and minutes.