Panasonic Dmc Fx65 Operating Instructions Manual

							- 121 -
Advanced (Playback)
Press [MENU/SET].
•If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture 
size will become smaller as shown below.
•The picture becomes slightly rougher.
Press 3 to select [YES] and then press [MENU/
SET].
•The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [ ] or less.
Press [ ‚] to return to the menu screen.¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the [ ] pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures with audio–Pictures recorded without setting the clock and title–Pictures that were previously stamped with [TEXT STAMP]–Pictures recorded with other equipment
Aspect ratio settingPicture size
X
//> 
Y// > 
W// >  
						

							Advanced (Playback)
- 122 -
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a 
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be 
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] Mode menu. (P21)
Press  3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is 
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
resized.
 [RESIZE] Reducing the picture size (number of pixels)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting1Press  2/1  to select the picture, 
and then press [MENU/SET].
2Press  2/1 to select the size¢, and 
then press [MENU/SET].
¢ Only the sizes to which the pictures can 
be resized is displayed.
[SINGLE]
[MULTI] setting
1Press  3/4  to select the size, and 
then press [MENU/SET].
•
When [DISPLAY] is pressed, an 
explanation of resizing is displayed.
2Press  3/4 /2 /1 to select the 
picture, and then press [DISPLAY].
•
Repeat this step for each picture, and 
press [MENU/SET] to set.
[MULTI] 
						

							- 123 -
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] Mode menu. (P21)
Press [MENU/SET].
Press  3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of  the trimmed picture may become smaller than 
that of the original picture.
•The picture quality of the trimmed picture will deteriorate.•It may not be possible to trim pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
trimmed.
•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [TRIMMING].
  [TRIMMING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Use the zoom lever and press 
3/ 4/2/1 to select the parts 
to be trimmed.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2 /1: Move Reduction
Enlargement
()
Move the position
() 
						

							Advanced (Playback)
- 124 -
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] Mode menu. (P21)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Quality of image may become coarse when leveling is performed.•Recorded pixels may decrease compared to original image when leveling is performed.•Leveling may not be performed on images recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
leveled.
•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [LEVELING].
  [LEVELING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Press  2/1 to adjust the tilting, and press [MENU/
SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.
Press  3 to select [YES] and then press [MENU/
SET]. 
						

							- 125 -
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu.  (P21)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif  is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•The display is not rotated during Multi Playback  (P43) or [CALENDAR]  (P117).
 [ROTATE DISP.]
Press  4 to select [ON] and then press [MENU/SET].
•The pictures are displayed without being rotated when you select 
[OFF].
•Refer to  P42 for information about how to play back pictures.
Press [MENU/SET] to close the menu. 
						

							Advanced (Playback)
- 126 -
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favorites. ([FAVORITE PLAY])•Play back the pictures set as favorites only as a slide show.•Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] Mode menu.  (P21)
∫Canceling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set as a favorite.
Note
•You can set up to 999 pictures as favorites.•When printing pictures at a photo printing store, [ALL DELETE EXCEPT Ü] (P45)  is useful so 
only the pictures you want to be printed remain on the card.
•You may not be able to set pictures taken with other equipment as favorites.
  [FAVORITE]
Press  4 to select [ON] and then press [MENU/SET].
•You cannot set pictures as favorites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to [OFF] 
even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press  2/1 to select the picture and then press  4.
•Repeat the above procedure.•If 4  is pressed again, the favorite setting is canceled. 
						

							- 127 -
Advanced (Playback)
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to  print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to  print pictures recorded on the built-in 
memory, copy them to a card  (P132) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [PRINT SET] on the [PLAYBACK] Mode menu.  (P21)
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
 [PRINT SET]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Advanced (Playback)
- 128 -
∫Canceling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
•Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures stamped with text.
Note
•The number of prints can be set from 0 to 999.•With a printer supporting PictBridge, the date print settings of the printer may take precedence 
so check if this is the case.
•It may not be possible to use the print settings  with other equipment. In this case, cancel all the 
settings, and reset the settings.
•If the file is not based on the DCF standard, the print setting cannot be set. 
						

							- 129 -
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu.  (P21)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on an SD  Memory Card or an SDHC Memory Card, they 
cannot be deleted when the card’s Write-Protect switch is set to [LOCK].
  [PROTECT]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
When [MULTI] has been selected
•Repeat these steps for each picture.•The settings are canceled when [MENU/
SET] is pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Advanced (Playback)
- 130 -
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] Mode menu. (P21)
Note
•Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures or pictures with audio recorded by this camera cannot be played 
back by older models of Panasonic digital camera (LUMIX) launched before July 2008.
  [AUDIO DUB.]
Press  2/1 to select the picture and then press 
[MENU/SET] to start audio recording.
•The message [OVERWRITE AUDIO DATA?] screen appears 
when audio has already been recorded. Press  3 to select [YES] 
and then press [MENU/SET] to start audio recording. (The 
original audio is overwritten.)
•Audio is recorded from the built-in microphone on the camera.•If you press [ ‚], the audio dubbing is canceled.
Press [MENU/SET] to stop recording.
•It will automatically stop after recording about 10 seconds without 
pressing [MENU/SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.