Panasonic Dmc Fx700 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fx700 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 191
![Page 191
- 191 -
Others
[THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR
MOVIE RECORDING.]
•
The writing speed is lower if the card has been formatted using a PC or other equipment. As a
consequence, motion picture recording may stop in the middle. If this happens, make a
backup of the data and format (P31) the card in this unit.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS
CARD.]
>If you want to delete some pictures, format the card after saving necessary data on a PC...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-190.png "Page 191
- 191 -
Others
[THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR
MOVIE RECORDING.]
•
The writing speed is lower if the card has been formatted using a PC or other equipment. As a
consequence, motion picture recording may stop in the middle. If this happens, make a
backup of the data and format (P31) the card in this unit.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS
CARD.]
>If you want to delete some pictures, format the card after saving necessary data on a PC...")
- 191 - Others [THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR MOVIE RECORDING.] • The writing speed is lower if the card has been formatted using a PC or other equipment. As a consequence, motion picture recording may stop in the middle. If this happens, make a backup of the data and format (P31) the card in this unit. [CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS CARD.] >If you want to delete some pictures, format the card after saving necessary data on a PC...
Page 192
![Page 192
Others
- 192 -
Troubleshooting
First, try out the following procedures (P192–200).
•
The battery is not inserted correctly. (P16)•The battery is exhausted.
•Is [SLEEP MODE] (P28) of the [ECONOMY] Mode active?
> Press the shutter button halfway to cancel this mode.
•The battery is exhausted.
•The battery is exhausted.•If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] Mode etc. (P28)
•If you connect to a TV compatible with VIERA Link with...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-191.png "Page 192
Others
- 192 -
Troubleshooting
First, try out the following procedures (P192–200).
•
The battery is not inserted correctly. (P16)•The battery is exhausted.
•Is [SLEEP MODE] (P28) of the [ECONOMY] Mode active?
> Press the shutter button halfway to cancel this mode.
•The battery is exhausted.
•The battery is exhausted.•If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] Mode etc. (P28)
•If you connect to a TV compatible with VIERA Link with...")
Others - 192 - Troubleshooting First, try out the following procedures (P192–200). • The battery is not inserted correctly. (P16)•The battery is exhausted. •Is [SLEEP MODE] (P28) of the [ECONOMY] Mode active? > Press the shutter button halfway to cancel this mode. •The battery is exhausted. •The battery is exhausted.•If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [ECONOMY] Mode etc. (P28) •If you connect to a TV compatible with VIERA Link with...
Page 193
![Page 193
- 193 -
Others
•Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P22)•Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase the available memory. (P52)
•The picture can become whitish if there is dirt e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel (P8) and gently wipe the lens
surface with a soft dry cloth.
•Was this picture taken with the flash at the close range when...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-192.png "Page 193
- 193 -
Others
•Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P22)•Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase the available memory. (P52)
•The picture can become whitish if there is dirt e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel (P8) and gently wipe the lens
surface with a soft dry cloth.
•Was this picture taken with the flash at the close range when...")
- 193 - Others •Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P22)•Is there any memory remaining on the built-in memory or the card? > Delete the pictures which are not necessary to increase the available memory. (P52) •The picture can become whitish if there is dirt e.g. fingerprints on the lens. > If the lens is dirty, turn on the camera, eject the lens barrel (P8) and gently wipe the lens surface with a soft dry cloth. •Was this picture taken with the flash at the close range when...
Page 194
![Page 194
Others
- 194 -
•Is the number of recordable pictures 2 or less?
•Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)> Decrease the ISO sensitivity. ( P 111 )
> Increase the setting for [NOISE REDUCTION] in [PICT. ADJ.] or lower the setting for each
of the items other than [NOISE REDUCTION]. (P123)
> Take pictures in bright places.
•Has [HIGH SENS.] in the Scene Mode been...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-193.png "Page 194
Others
- 194 -
•Is the number of recordable pictures 2 or less?
•Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)> Decrease the ISO sensitivity. ( P 111 )
> Increase the setting for [NOISE REDUCTION] in [PICT. ADJ.] or lower the setting for each
of the items other than [NOISE REDUCTION]. (P123)
> Take pictures in bright places.
•Has [HIGH SENS.] in the Scene Mode been...")
Others - 194 - •Is the number of recordable pictures 2 or less? •Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.)> Decrease the ISO sensitivity. ( P 111 ) > Increase the setting for [NOISE REDUCTION] in [PICT. ADJ.] or lower the setting for each of the items other than [NOISE REDUCTION]. (P123) > Take pictures in bright places. •Has [HIGH SENS.] in the Scene Mode been...
Page 195
![Page 195
- 195 -
Others
•Use a card with SD Speed Class¢ with “Class 4” or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures
in [MOTION JPEG].
¢ SD Speed Class is the speed standard regarding continuous writing.
•Depending on the type of the card, recording may stop in the middle.
> If motion picture recording stops during use of a card of at least “Class 4” or if you use a
card that has been formatted on a PC or...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-194.png "Page 195
- 195 -
Others
•Use a card with SD Speed Class¢ with “Class 4” or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures
in [MOTION JPEG].
¢ SD Speed Class is the speed standard regarding continuous writing.
•Depending on the type of the card, recording may stop in the middle.
> If motion picture recording stops during use of a card of at least “Class 4” or if you use a
card that has been formatted on a PC or...")
- 195 - Others •Use a card with SD Speed Class¢ with “Class 4” or higher when recording motion pictures in [AVCHD]. Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures in [MOTION JPEG]. ¢ SD Speed Class is the speed standard regarding continuous writing. •Depending on the type of the card, recording may stop in the middle. > If motion picture recording stops during use of a card of at least “Class 4” or if you use a card that has been formatted on a PC or...
Page 196
![Page 196
Others
- 196 -
•The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
•[POWER LCD] is activated. (P27)
•This is not a malfunction.
These pixels do not affect the recorded pictures.
•In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
•Is the flash setting set to [Œ]?
> Change the flash setting. (P56)
•Flash Mode is not available when Auto...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-195.png "Page 196
Others
- 196 -
•The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
•[POWER LCD] is activated. (P27)
•This is not a malfunction.
These pixels do not affect the recorded pictures.
•In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
•Is the flash setting set to [Œ]?
> Change the flash setting. (P56)
•Flash Mode is not available when Auto...")
Others - 196 - •The LCD monitor may flicker for a few seconds after turning the camera on indoors under fluorescent light. This is not a malfunction. •[POWER LCD] is activated. (P27) •This is not a malfunction. These pixels do not affect the recorded pictures. •In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect the pictures you are recording. •Is the flash setting set to [Œ]? > Change the flash setting. (P56) •Flash Mode is not available when Auto...
Page 197
- 197 - Others •Is this a non-standard picture, a picture which has been edited using a PC or a picture which was taken by another make of digital camera? •Did you remove the battery immediately after pict ure-taking or did you take the picture using a battery with a low remaining charge? > Format the data to delete the pictures mentioned above. (P31) (Other pictures will be deleted as well and it will not be possible to restore them. Therefore, check well before formatting.) • Is the clock in the...
Page 198
![Page 198
Others
- 198 -
•Is the camera connected to the TV correctly?> Set the TV input to External Input Mode.
•Output from the [HDMI] socket is not possible when it is connected to the PC or the printer.
> Connect it only to the TV.
•Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV? > Connect the camera to the TV with...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-197.png "Page 198
Others
- 198 -
•Is the camera connected to the TV correctly?> Set the TV input to External Input Mode.
•Output from the [HDMI] socket is not possible when it is connected to the PC or the printer.
> Connect it only to the TV.
•Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV? > Connect the camera to the TV with...")
Others - 198 - •Is the camera connected to the TV correctly?> Set the TV input to External Input Mode. •Output from the [HDMI] socket is not possible when it is connected to the PC or the printer. > Connect it only to the TV. •Depending on the TV model, the pictures may be extended horizontally or vertically or they may be displayed with their edges cut off. •Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV? > Connect the camera to the TV with...
Page 199
![Page 199
- 199 -
Others
>Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
•Pictures cannot be printed using a printer which does...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-198.png "Page 199
- 199 -
Others
>Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
•Pictures cannot be printed using a printer which does...")
- 199 - Others >Disconnect the USB connection cable. Connect it again while the card is inserted in the camera. > Check if your PC is compat ible with SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.html > A message prompting to format the card may be displayed when connecting, but do not format. > If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the USB connection cable after turning off the power. •Pictures cannot be printed using a printer which does...
Page 200
![Page 200
Others
- 200 -
•If you do not use the camera for a long time, the clock may be reset.> [PLEASE SET THE CLOCK] message will be displayed; please re-set the clock. When
taking pictures, it will not be possible to record the correct date without setting the clock.
(P20)
•It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
•When using the Extended Optical Zoom or...](http://img.usermanuals.tech/thumb/58/65596/w300_dmc-fx700_en_adv_om_d-199.png "Page 200
Others
- 200 -
•If you do not use the camera for a long time, the clock may be reset.> [PLEASE SET THE CLOCK] message will be displayed; please re-set the clock. When
taking pictures, it will not be possible to record the correct date without setting the clock.
(P20)
•It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
•When using the Extended Optical Zoom or...")
Others - 200 - •If you do not use the camera for a long time, the clock may be reset.> [PLEASE SET THE CLOCK] message will be displayed; please re-set the clock. When taking pictures, it will not be possible to record the correct date without setting the clock. (P20) •It is possible that the subject may be warped slightly, or the borders get colored, depending on the zoom magnification, due to the characteristics of the lens, but this is not a malfunction. •When using the Extended Optical Zoom or...