Panasonic Dmc Fx75 Operating Instructions Manual

							- 131 -
Advanced (Playback)
[PLAYBACK] Mode: ¸
Creating Still Pictures From a Motion Picture
You can create a single still picture from a recorded motion picture.
Touch [ ] during Motion Picture playback.
•Motion picture is paused.
To u c h  [ ] .
Touch [YES].
Touch [ ] to finish.
•[QUALITY] is fixed to [›].•Still pictures created from a motion picture may be coarser than with normal picture quality.
Note
•You may not be able to save still pictures from a motion picture taken on other equipment.
Picture size
[MOTION JPEG]Picture size[AVCHD Lite]Picture size
([HD])/
([WVGA])2M
(16:9)([SH])/
([H])/
([L])2M
(16:9)
([VGA])/
([QVGA])0.3 M (4:3)
SAVE 
						

							Advanced (Playback)
- 132 -
[PLAYBACK] Mode: ¸
Using the [PLAYBACK] Mode Menu
You can use various functions in Playback Mode to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [L EVELING], a new edited picture is created. 
A new picture cannot be created if there is no free space on the built-in memory or the card so 
we recommend checking that there is free space and then editing the picture.
You can add text (comments) to pictures. After text has been registered, it can be stamped 
in prints using [TEXT STAMP]  (P135). (Only alphabetic characters and symbols can be 
entered.)
Select [TITLE EDIT] on the [PLAYBACK] Mode menu.  (P23)
Touch [SINGLE] or [MULTI].
  [TITLE EDIT]
Select an image to add text to.
•[ ’] is displayed for pictures with titles 
already registered.
[SINGLE] setting1Drag the screen horizontally 
and select an image.
2Touch [SET].
•You can forward or rewind pictures 
continuously by keeping your finger on 
the left or right sides of the screen after 
forwarding/rewinding a picture.
(Pictures are displayed reduced in 
size.)
[MULTI] setting
1Touch a picture to select 
(repeat).
•
Switch the screen by touching [ 3]/[4] 
if these are displayed on the slide bar.
•Setting is canceled by touching the 
same picture again.
2Touch [OK]. [SINGLE] [MULTI] 
						

							- 133 -
Advanced (Playback)
Enter the text. (P121)
Touch [CANCEL] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Touch [EXIT] to close the menu.
Note
•To delete the title, erase all the text in the text input screen.•Text can be scrolled if all of the registered text does not fit on the screen.•You can print out texts (comments) using the “PHOTOfunSTUDIO 5.0 HD Edition” bundled 
software on the CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use [TITLE EDIT] for the following types of pictures:–Motion pictures–Protected pictures–Pictures recorded with other equipment 
						

							Advanced (Playback)
- 134 -
Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.
It cannot be restored once divided.
Touch [CANCEL] to return to the menu screen.
•Touch [EXIT] to close the menu.
Note
•[VIDEO DIVIDE] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location close to the start or end of the motion picture.•With [MOTION JPEG] motion pictures, the  order of pictures will change if divided.
It is recommended to display these motion pictures by using [CALENDAR] or [MOTION JPEG] 
in the [MODE PLAY].
•With [AVCHD Lite] motion pictures, the order of pictures will not change.•Motion pictures cannot be divided in the following cases.–Motion pictures set as [FAVORITE]–Protected motion pictures–Motion pictures with a short recording time
  [VIDEO DIVIDE]
Select [VIDEO DIVIDE] on the [PLAYBACK] 
Mode menu.  (P23)
Drag the screen horizontally to select a 
motion picture to divide, and touch [SET].
•For how to select a picture, see  P48.•Motion picture is played back.
Touch [ ] at the location to divide.
•Motion picture is paused.
Motion picture is played back from the same location 
when [ ] is touched again.
To u c h  [ ] .
Touch [YES].
•Motion picture may be lost if the card or battery is 
removed while processing the dividing. 
						

							- 135 -
Advanced (Playback)
You can stamp the recording date/time, name, location, travel date or title onto the 
recorded pictures.
It is suitable for regular size printing. (Pictures with a Picture Size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] Mode menu.  (P23)
Touch [SINGLE] or [MULTI].
  [TEXT STAMP]
Select an image you wish to 
stamp with text.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[SINGLE] setting1Drag the screen horizontally 
and select an image.
2Touch [SET].
•You can forward or rewind pictures 
continuously by keeping your finger on 
the left or right sides of the screen after 
forwarding/rewinding a picture. 
(Pictures are displayed reduced in 
size.)
[MULTI] setting
1Touch a picture to select 
(repeat)
•
Switch the screen by touching [ 3]/[4] 
if these are displayed on the slide bar.
•Selection will be canc eled by touching 
the same picture again.
2Touch [OK]. [SINGLE]
[MULTI] 
						

							Advanced (Playback)
- 136 -
Select the item to stamp.
To u c h  t h e  i t e m .
ItemSetting item
[SHOOTING DATE]
[OFF]
[W/OTIME]:
Stamp the year, month and date.
[WITHTIME]:Stamp the year, month, day, hour and minutes.
[NAME]
[OFF]
[]: Stamps names registered in name settings for 
[FACE RECOG.].
[]: Stamps names registered in name settings for 
[BABY1]/[BABY2] or [PET] in Scene Mode.
[LOCATION]
[OFF]
[ON]:
Stamps the travel destination name set under 
[LOCATION].
[TRAVEL DATE]
[OFF]
[ON]:
Stamps the travel date set under 
[TRAVEL DATE].
[TITLE]
[OFF]
[ON]:
Title input in the [TITLE EDIT] will be stamped. 
						

							- 137 -
Advanced (Playback)
Touch [SET].
•If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture 
size will become smaller as shown below.
•To stamp [AGE] when [ ] or [ ] is selected, touch [YES] and proceed to step7.
Touch [YES].
•The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [ ] or less.
Touch [CANCEL] to return to the menu screen.¢
¢The menu screen is automatically restored when [MULTI] is 
selected.
•Touch [EXIT] to close the menu.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the [ ]/[ ]/[ ]/[ ] pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures with audio–Pictures recorded without setting the clock and title–Pictures that were previously stamped with [TEXT STAMP]–Pictures recorded with other equipment
Aspect ratio settingPicture size
X
///> 
Y/// > 
W/// > 
/// >  
						

							Advanced (Playback)
- 138 -
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
Select [RESIZE] on the [PLAYBACK] Mode menu. (P23)
Select the picture and size.
 [RESIZE] Reducing the picture size (number of pixels)
Touch [SINGLE] or [MULTI].
[SINGLE] setting
1Drag the screen horizontally to 
select an image, and then touch 
[SET].
•
You can forward or rewind pictures 
continuously by keeping your finger on 
the left or right sides of the screen after 
forwarding/rewinding a picture.
(Pictures are displayed reduced in 
size.)
2Touch the size you wish to 
change, and then touch [SET]. [SINGLE]
[MULTI] setting
1Touch the size you wish to 
change, and then touch [SET].
2Touch a picture to select 
(repeat)
•
Switch the screen by touching [ 3]/[4] 
if these are displayed on the slide bar.
•Selection will be canc eled by touching 
the same picture again.
3Touch [OK]. [MULTI] 
						

							- 139 -
Advanced (Playback)
Touch [YES].
Touch [CANCEL] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is 
selected.
•Touch [EXIT] to close the menu.
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
resized. 
						

							Advanced (Playback)
- 140 -
You can enlarge and then crop the important part of the recorded picture.
Select [CROPPING] on the [PLAYBACK] Mode menu. (P23)
Touch [SET].
Touch [YES].
Touch [CANCEL] to return to the menu screen.
•Touch [EXIT] to close the menu.
Note
•Depending on the cut size, the picture size of the cropped picture may become smaller than 
that of the original picture.
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
cropped.
•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [CROPPING].
  [CROPPING]
Drag the screen horizontally to select an 
image, and then touch [SET].
•For how to select a picture, see  P48.
Select the parts to be 
cropped.
Touch [ ]: Enlarge
Touch [ ]: Reduce
Drag  (P9): Move
•
It is also possible to enlarge or 
reduce using the zoom lever.
Reduction Enlargement
()
Move the position
()