Panasonic Dmc Fx75 Operating Instructions Manual

							- 161 -
Connecting to other equipment
∫Viewing the contents of the built-in memory or card using the PC (folder 
composition)
Folders and images processed in the PC  cannot be played back on the camera. It is 
recommended to use the “PHOTOfunSTUDIO 5.0 HD Edition” bundled software on the 
CD-ROM (supplied) when you write the image from PC to a card.
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET]  (P29) in the [SETUP] menu has been executed•When a card containing a folder with the same folder number has been inserted (Such as when 
pictures were taken using another make of camera)
•When there is a picture with file number 999 inside the folder
∫Connection in the PTP Mode (WindowsR XP, Windows VistaR, WindowsR 7 and 
Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP 
Mode.
•[AVCHD Lite] motion picture cannot be played back in PTP Mode.
1 Folder number
2 File number
3 JPG: Pictures
MOV: [MOTION JPEG]
MISC: DPOF print Favorite
AVCHD: [AVCHD Lite] Motion  pictures 
						

							Connecting to other equipment
- 162 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started from the camera’s LCD monitor.
•
Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
B Align the marks, and insert.
•Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional). If the remaining battery power becomes low while the camera and the printer are 
connected, the alarm beeps. If this happens during printing, stop printing at once. If not printing, 
disconnect the USB connection cable.
Connect the camera to a printer via the USB connection cable  A 
(supplied).
•When the camera is connected to the printer, the cable disconnect prohibit icon [ å] 
appears. Do not disconnect the USB cable while [ å] is displayed.
Touch [PictBridge(PTP)].
PictBridge(PTP)PC
USB MODE
PLEASE SELECT 
THE USB MODE 
						

							- 163 -
Connecting to other equipment
Note
•This unit cannot stand upright when the AC adaptor is connected. When placing it on a surface 
and operating it, we recommend placing it on a soft cloth.
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
•Turn the camera off before connecting or disconnecting the AC adaptor (optional).•Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
cable.
•You cannot switch between the built-in memory and the card while the camera is connected to 
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect 
the USB connection cabl e to the printer again.
•Motion pictures recorded in [AVCHD Lite] cannot be printed out.
Selecting a single picture and printing it
Drag the screen horizontally to select an 
image, and then touch [PRINT].
•You can forward or rewind pictures continuously by 
keeping your finger on the left or right sides of the 
screen after forwarding/rewinding a picture.
(Pictures are displayed reduced in size)
•The message disappears in about 2 seconds.
Touch [PRINT START].
•Refer to  P165 for the items which can be set before 
starting to print the pictures.
•Touch [CANCEL] to cancel printing halfway.•Disconnect the USB connecti on cable after printing.
100_
0001100
100 _
0001 0001
100 _
00011/7
1/7
1/7
PictBridge PictBridge
PictBridge
MULTI PRINTPRINT
OFF
1
SINGLE SELECT PRINT START
PRINT WITH DATE
NUM.OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL 
						

							Connecting to other equipment
- 164 -
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites.  (P143)
Selecting multiple pictures and printing them
Touch [MULTI PRINT].
To u c h  t h e  i t e m .
•If the print check screen has appeared, select [YES], 
and print the pictures.
ItemDescription of settings
[MULTI SELECT] Multiple pictures are printed at one time.
•Switch the screen by touching [
3]/[4] if these are displayed on the slide 
bar.
•When you select the picture you wish to print, [é] will appear. (Touch 
the same picture again to cancel the selection.)
•After the pictures have been selected, touch [SET]
[SELECT ALL] Prints all the stored pictures.
[PRINT SET 
(DPOF)] Prints the pictures set in [PRINT SET] only. 
(P144)
[FAVORITE]
¢Prints the pictures set as favorites only.  (P143)
Touch [PRINT START].
•Refer to P165 for the items which can be set before 
starting to print the pictures.
•Touch [CANCEL] to cancel printing halfway.•Disconnect the USB connecti on cable after printing.
PictBridge
CANCEL
MULTI SELECTSELECT ALL PRINT SET (DPOF) FAVORITE
OFF
1
MULTI SELECTPRINT START
PRINT WITH DATE
NUM.OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL 
						

							- 165 -
Connecting to other equipment
Select and set the items both on the screen in step 2 
of the “Selecting a single picture and printing it” and 
in step 
3 of the “Selecting multiple pictures and 
printing them” procedures.
•
When you want to print pictures on a paper size or a layout 
which is not supported by the camera, set [PAPER SIZE] or 
[PAGE LAYOUT] to [ {] and then set the paper size or the 
layout on the printer. (For details, refer to the operating instructions of the printer.)
•When [PRINT SET (DPOF)] has been selected, the [PRINT WITH DATE] and 
[NUM. OF PRINTS] items are not displayed.
•If the printer does not support date printing, the date cannot be printed on the picture.•Since the printer’s settings may take precedence over the Print With Date setting, check the 
printer’s Print With Date setting as well.
•When printing images with a Text Stamp, please remember to set Print With Date to [OFF] or 
the date will print on top.
NoteWhen asking the photo shop to print the pictures•By stamping the date using [TEXT STAMP]  (P135) or setting date printing in [PRINT SET] 
(P144)  before going to a photo shop, the dates can be printed at the photo shop.
You can set the number of prints up to 999.
Print Settings
[PRINT WITH DATE]
ItemDescription of settings
[OFF] Date is not printed.
[ON] Date is printed.
[NUM. OF PRINTS]
OFF
1
MULTI SELECTPRINT START
PRINT WITH DATE
NUM.OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL 
						

							Connecting to other equipment
- 166 -
•Paper sizes not supported by the printer will not be displayed.
[PAPER SIZE]
ItemDescription of settings
{ Settings on the printer are prioritized.
[L/3.5 qk5q]
89 mmk127 mm
[2L/5 qk7q] 127 mmk178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
[A3] 297 mmk420 mm
[10 k15cm] 100 mmk150 mm
[4 qk6 q] 101.6 mmk152.4 mm
[8 qk10 q] 203.2 mmk254 mm
[LETTER] 216 mmk279.4 mm
[CARD SIZE] 54 mmk85.6 mm 
						

							- 167 -
Connecting to other equipment
•An item cannot be selected if the printer does not support the page layout.
∫Layout printing
When printing a picture several times on 1 sheet of paper
For example, if you want to print the same picture 4 times on 1 sheet of paper, set 
[PAGE LAYOUT] to [ ä] and then set [NUM. OF PRINTS] to 4 for the picture that you 
want to print.
When printing different pictures on 1 sheet of paper
For example, if you want to print 4 different pictures on 1 sheet of paper, set 
[PAGE LAYOUT] to [ ä] and then set [NUM. OF PRINTS] to 1 for each of the 4 pictures.
Note
•
The camera is receiving an error message from the printer when the [ ¥] indication lights 
orange during printing. After finishing printing, make sure there are no problems with the 
printer.
•If the number of prints is high, the pictures may be printed several times. In this case, the 
remaining number of prints indicated may differ from the number set.
[PAGE LAYOUT] (Layouts for printing that can be set with this unit)
ItemDescription of settings
{ Settings on the printer are prioritized.
á 1 picture with no frame on 1 page
â 1 picture with a frame on 1 page
ã 2 pictures on 1 page
ä 4 pictures on 1 page 
						

							Others
- 168 -
OthersScreen Display
∫In recording
Recording in Normal Picture Mode [ !] (Initial setting)
1 Recording Mode
2REC MODE (P88) /Recording quality 
(P88)
3 Picture size  (P104)
4 Optical Image Stabilizer (P117) /: 
Jitter alert (P42)
5 Focus  (P41)
6 Battery indication  (P13)
7 Exposure Compensation  (P64)
8 Flash Mode  (P56)
9 Macro Mode  (P61)
10 Self-timer  (P63)
11 Display  (P54)
12 Touch shutter  (P43)
13 Burst  (P67)
14 ISO sensitivity (P106) maximum ISO sensitivity level  (P107)
15 Shutter speed  (P41)
16 Aperture value  (P41)
17 Auto Focus Mode  (P110)
18 Quick Menu  (P25)
19 Quick AF  (P113)
20 AF area  (P41)
21 Recording state
22 Built-in memory  (P18)
: Card (P18)  (displayed only during recording)
23 Number of recordable pictures
¢  (P189)
¢[ i 99999] is displayed if there are more than 100000 pictures remaining.
·
650650650
QQ
77
1/301/301/30
F2.2F2.2F2.2ISOISO100100ISO100·
00
10
11
12
13
14
15
16
12345
6
78 9
1718
19
20 21 22
23 
						

							- 169 -
Others
∫In recording (after settings)
24 Available recording time  (P85):
25 Spot AF area  (P110)
26 White Balance  (P107)
27 Color Mode  (P116)
28 Intelligent Exposure  (P114)
29 Intelligent Resolution  (P115)
30 Auto Bracket  (P65)/B : Audio Recording 
(P118)
31 Wind cut  (P120)
32 AF Assist Lamp  (P119)
33 Histogram  (P55)
34 Cosmetic Mode  (P69)
: Scene Mode  (P71)
35 Zoom/Extended Optical Zoom (P45) /
Digital Zoom  (P45, 115) /Intelligent Zoom  (P45): 
36 Minimum shutter speed
  (P114)37 Self-timer Mode  (P63)
38 Current date and time/ “: Travel destination setting¢1 (P101)
39 Age¢2  (P77)
40 Elapsed recording time  (P85)
41 Continuous AF  (P113)
42 Name
¢2  (P77)
Location¢ 1 (P98)
43 Travel Date¢ 1 (P98)
44 Number of days that have passed since the departure date¢ 1 (P98)
¢1 This is displayed for about 5 seconds when the camera is turned on, after setting the clock 
and after switching from Playback Mode to Recording Mode.
¢2 This is displayed for about 5 seconds when this unit is turned on in [BABY1]/[BABY2] or 
[PET] in Scene Mode.
3T3T11
28 29
35
36373839
40 41
42
43
31
32
33
34CC
30NATNATNAT
24 25
26
27
44
R8m30s
SCN
W 
						

							Others
- 170 -
∫In playback
1 Playback Mode  (P48)
2 Audio playback  (P129)
/ : Recording quality  (P88)
3 Protected picture  (P146)
4 Favorites  (P143)
5 Stamped with text indication (P135)
6 Color Mode  (P116)
: Cosmetic Mode (P69)
7 Playback (Motion Picture, Picture with  Audio)  (P129)
8 Picture size  (P104)
9 Battery indication  (P13)
10 Favorites settings  (P143)
11 Number of prints  (P144)
Elapsed playback time  (P129):
12 Histogram  (P55)
13 Multi Playback (P49)
14 Display  (P54)
15 Delete  (P52)
16 Recording information  (P54)
17 Exposure Compensation  (P64)
18 Recorded date and time/World Time (P101) /Name
¢ (P77 , 94) /Location¢ (P98) /Title¢ 
(P132)
19 Age  (P77)
20 Number of days that have passed since the departure date  (P98)
21 Motion picture recording time (P129) :
22 Picture number/Total pictures
23 Folder/File number  (P161)
Built-in memory  (P18)
Cable disconnection warning icon  (P162)
¢
It is displayed in order of [TITLE], [LOCATION], [NAME] ([BABY1]/[BABY2], [PET]), [NAME] 
([FACE RECOG.]).
100 _
0001100
100 _
0001 0001
100 _
00011/7
1/7
1/79s
9s
9s
1 1
2
1345 789
16
17
18
19 20
21 22 23
1ST DAY
ST DAY
1ST DAY
2 months 10days 2 months 10days
2 months 10days
10 11
12
13
14
15
NAT NAT
NAT
6
10:00 DEC.1.2010
10:00 DEC.1.2010
10:00 DEC.1.2010
8m30s
8m30s