Panasonic Dmc Fz1000 Basic Owners Manual
Here you can view all the pages of manual Panasonic Dmc Fz1000 Basic Owners Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 11
11 Before Use (ENG) SQT0196 Standard Accessories Check that all the accessories are supplied before using the camera. Product numbers correct as of June 2014. These may be subject t o change. 1 Battery Pack (Indicated as battery pack or battery in the text) Charge the battery before use. 2 Battery Charger (Indicated as battery charger or charger in the text)3 Lens Hood 4 Lens Cap 5 USB Connection Cable 6DVD • Software: Use it to install the software to your PC. •Owner’s Manual for advanced features:...
Page 12
![Page 12
12
Before Use
SQT0196 (ENG)
Names and Functions of Components
23
22
67891011
1213 14
2124 25
16
17
18
19
20
26
5
15
1234
1Mode dial (P21)
2Camera ON/OFF switch (P18)
3Status indicator (P18)
4Wi-Fi® connection lamp (P56)
5
Focal length scale (35 mm film camera
equivalent)
•Indicates values for the [3:2] aspect
ratio. (When recording motion pictures,
refer to the focal length displayed on
the screen.)
6[Wi-Fi] button (P56)/[Fn2] button
7[Fn1] button
8Motion picture button (P22)
9Shutter button (P22)...](http://img.usermanuals.tech/thumb/58/65614/w300_dmc-fz1000_en_om_d-11.png "Page 12
12
Before Use
SQT0196 (ENG)
Names and Functions of Components
23
22
67891011
1213 14
2124 25
16
17
18
19
20
26
5
15
1234
1Mode dial (P21)
2Camera ON/OFF switch (P18)
3Status indicator (P18)
4Wi-Fi® connection lamp (P56)
5
Focal length scale (35 mm film camera
equivalent)
•Indicates values for the [3:2] aspect
ratio. (When recording motion pictures,
refer to the focal length displayed on
the screen.)
6[Wi-Fi] button (P56)/[Fn2] button
7[Fn1] button
8Motion picture button (P22)
9Shutter button (P22)...")
12 Before Use SQT0196 (ENG) Names and Functions of Components 23 22 67891011 1213 14 2124 25 16 17 18 19 20 26 5 15 1234 1Mode dial (P21) 2Camera ON/OFF switch (P18) 3Status indicator (P18) 4Wi-Fi® connection lamp (P56) 5 Focal length scale (35 mm film camera equivalent) •Indicates values for the [3:2] aspect ratio. (When recording motion pictures, refer to the focal length displayed on the screen.) 6[Wi-Fi] button (P56)/[Fn2] button 7[Fn1] button 8Motion picture button (P22) 9Shutter button (P22)...
Page 13
![Page 13
13
Before Use
(ENG) SQT0196
2942
43
32
28 2733
4430
31
4546
47
40
41 39
36 35
37
38
34
27[LVF] button (P16)/[Fn5] button
28
Speaker•Be careful not to cover the speaker with
your finger. Doing so may make sound
difficult to hear.
29Monitor (P15)
30NFC antenna [ ] (P59)
31
Tripod mount•A tripod with a screw length of 5.5 mm
(0.22 inch) or more may damage this
unit if attached.
32
Rear dial
•This Owner’s Manual describes
operations of the rear dial as follows:
33[DISP.] button (P24)•Each time this is...](http://img.usermanuals.tech/thumb/58/65614/w300_dmc-fz1000_en_om_d-12.png "Page 13
13
Before Use
(ENG) SQT0196
2942
43
32
28 2733
4430
31
4546
47
40
41 39
36 35
37
38
34
27[LVF] button (P16)/[Fn5] button
28
Speaker•Be careful not to cover the speaker with
your finger. Doing so may make sound
difficult to hear.
29Monitor (P15)
30NFC antenna [ ] (P59)
31
Tripod mount•A tripod with a screw length of 5.5 mm
(0.22 inch) or more may damage this
unit if attached.
32
Rear dial
•This Owner’s Manual describes
operations of the rear dial as follows:
33[DISP.] button (P24)•Each time this is...")
13 Before Use (ENG) SQT0196 2942 43 32 28 2733 4430 31 4546 47 40 41 39 36 35 37 38 34 27[LVF] button (P16)/[Fn5] button 28 Speaker•Be careful not to cover the speaker with your finger. Doing so may make sound difficult to hear. 29Monitor (P15) 30NFC antenna [ ] (P59) 31 Tripod mount•A tripod with a screw length of 5.5 mm (0.22 inch) or more may damage this unit if attached. 32 Rear dial •This Owner’s Manual describes operations of the rear dial as follows: 33[DISP.] button (P24)•Each time this is...
Page 14
14 Before Use SQT0196 (ENG) Preparations before Recording •Do not hold the lens hood in a way that twists or bends it. •Check that the camera is turned off.•Close the flash. 1Align the mounting mark under the long side of the lens hood with the mounting projection on the edge of the lens. 2Screw in the lens hood in the direction of the arrow.3You will feel some stiffness just before the mark, but continue to rotate the lens hood until you hear a “click” and align the mark. • Check that the lens hood...
Page 15
15 Before Use (ENG) SQT0196 •We recommend attaching the shoulder strap when using the camera to prevent it from dropping. 1Pass the shoulder strap through the hole at the shoulder strap eyelet. 2Pass the shoulder strap through the stopper and fasten the shoulder strap. APull the shoulder strap 2 cm (0.066 feet) or more. •Attach the shoulder strap to the other side of the camera being careful not to twist it. At the time when this camera is purchased, the monitor is stowed in the camera body....
Page 16
![Page 16
16
Before Use
SQT0196 (ENG)
Press [LVF] to switch between the Monitor and Viewfinder.
•The monitor/viewfinder will switch as follows:
¢ If [Eye Sensor AF] in the [Custom] m enu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated.
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the
viewfinder clearly.
Look at the display on the viewfinder and rotate the diopter
adjustment dial to where the screen is in focus.
A Diopter adjustment...](http://img.usermanuals.tech/thumb/58/65614/w300_dmc-fz1000_en_om_d-15.png "Page 16
16
Before Use
SQT0196 (ENG)
Press [LVF] to switch between the Monitor and Viewfinder.
•The monitor/viewfinder will switch as follows:
¢ If [Eye Sensor AF] in the [Custom] m enu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated.
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the
viewfinder clearly.
Look at the display on the viewfinder and rotate the diopter
adjustment dial to where the screen is in focus.
A Diopter adjustment...")
16 Before Use SQT0196 (ENG) Press [LVF] to switch between the Monitor and Viewfinder. •The monitor/viewfinder will switch as follows: ¢ If [Eye Sensor AF] in the [Custom] m enu is set to [ON], the camera automatically adjusts the focus as the eye sensor is activated. ∫ Diopter adjustment Adjust the diopter to suit your vision so that you can see the viewfinder clearly. Look at the display on the viewfinder and rotate the diopter adjustment dial to where the screen is in focus. A Diopter adjustment...
Page 17
17 Before Use (ENG) SQT0196 ∫Charging time • The indicated charging time is for when the battery has been di scharged completely. The charging time may vary depending on how the battery has bee n used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal. ∫ Battery indication • The indication turns red and bli nks if the remaining battery power is exhausted. (The status indicator also blinks) Recharge the battery or...
Page 18
![Page 18
18
Before Use
SQT0196 (ENG)
∫About the motion picture recording and speed classAccording to the [Rec Format] and [Rec Quality] of a motion pic ture, the required card differs.
Use a card that meets the following ratings of the SD Speed Cla ss or UHS Speed Class.
•SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing.
To check the class, see the labelled side, etc. of the card.
•Please confirm the latest information on the following website....](http://img.usermanuals.tech/thumb/58/65614/w300_dmc-fz1000_en_om_d-17.png "Page 18
18
Before Use
SQT0196 (ENG)
∫About the motion picture recording and speed classAccording to the [Rec Format] and [Rec Quality] of a motion pic ture, the required card differs.
Use a card that meets the following ratings of the SD Speed Cla ss or UHS Speed Class.
•SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing.
To check the class, see the labelled side, etc. of the card.
•Please confirm the latest information on the following website....")
18 Before Use SQT0196 (ENG) ∫About the motion picture recording and speed classAccording to the [Rec Format] and [Rec Quality] of a motion pic ture, the required card differs. Use a card that meets the following ratings of the SD Speed Cla ss or UHS Speed Class. •SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing. To check the class, see the labelled side, etc. of the card. •Please confirm the latest information on the following website....
Page 19
![Page 19
19
Basic Operation
(ENG) SQT0196
Setting the Menu
Example: In the [Rec] menu, change [Quality] from [A] to [›]
1Press [MENU/SET].
2Press 3/4 to select the menu item and then press [MENU/SET].
3Press 3/4 to select the setting and then
press [MENU/SET].
•Depending on the menu item, its setting may not appear
or it may be displayed in a different way.
∫ Close the menu
Press [ ] repeatedly until the screen returns to the recording/p layback screen.
•
In Recording Mode, the menu screen can also be exited...](http://img.usermanuals.tech/thumb/58/65614/w300_dmc-fz1000_en_om_d-18.png "Page 19
19
Basic Operation
(ENG) SQT0196
Setting the Menu
Example: In the [Rec] menu, change [Quality] from [A] to [›]
1Press [MENU/SET].
2Press 3/4 to select the menu item and then press [MENU/SET].
3Press 3/4 to select the setting and then
press [MENU/SET].
•Depending on the menu item, its setting may not appear
or it may be displayed in a different way.
∫ Close the menu
Press [ ] repeatedly until the screen returns to the recording/p layback screen.
•
In Recording Mode, the menu screen can also be exited...")
19 Basic Operation (ENG) SQT0196 Setting the Menu Example: In the [Rec] menu, change [Quality] from [A] to [›] 1Press [MENU/SET]. 2Press 3/4 to select the menu item and then press [MENU/SET]. 3Press 3/4 to select the setting and then press [MENU/SET]. •Depending on the menu item, its setting may not appear or it may be displayed in a different way. ∫ Close the menu Press [ ] repeatedly until the screen returns to the recording/p layback screen. • In Recording Mode, the menu screen can also be exited...
Page 20
![Page 20
20
Basic Operation
SQT0196 (ENG)
∫Switching to other menus
e.g.: Switching to the [Setup] menu from [Rec] menu.
1Press 2.2Press 3/4 to select [ ] or another of the menu
toggle icons.
3Press [MENU/SET].
•Select a menu item next and set it.
By using the Quick Menu, some of the menu settings can be easily found.
•The features that can be adjusted using Quick Menu are determin ed by the mode or a display
style the camera is in.
1Press [Q.MENU] to display the Quick Menu.
2Rotate the rear dial to select...](http://img.usermanuals.tech/thumb/58/65614/w300_dmc-fz1000_en_om_d-19.png "Page 20
20
Basic Operation
SQT0196 (ENG)
∫Switching to other menus
e.g.: Switching to the [Setup] menu from [Rec] menu.
1Press 2.2Press 3/4 to select [ ] or another of the menu
toggle icons.
3Press [MENU/SET].
•Select a menu item next and set it.
By using the Quick Menu, some of the menu settings can be easily found.
•The features that can be adjusted using Quick Menu are determin ed by the mode or a display
style the camera is in.
1Press [Q.MENU] to display the Quick Menu.
2Rotate the rear dial to select...")
20 Basic Operation SQT0196 (ENG) ∫Switching to other menus e.g.: Switching to the [Setup] menu from [Rec] menu. 1Press 2.2Press 3/4 to select [ ] or another of the menu toggle icons. 3Press [MENU/SET]. •Select a menu item next and set it. By using the Quick Menu, some of the menu settings can be easily found. •The features that can be adjusted using Quick Menu are determin ed by the mode or a display style the camera is in. 1Press [Q.MENU] to display the Quick Menu. 2Rotate the rear dial to select...