Panasonic Dmc Fz1000 Basic Owners Manual

							51
Recording Modes
 (ENG) SQT0196
Creating Stop Motion Pictures ([Stop Motion 
Animation])
Applicable modes: 
•
Set the date and time settings in advance. (P18)•Pictures taken with [Stop Motion Animation] are displayed as a  set of group pictures.
1Set the drive mode dial to [ ] .
2Press [MENU/SET].
3Press [MENU/SET].
4Select [Mode] with 3/4, and then press [MENU/SET] .
5Select [Stop Motion Animation] with  3/4, and then press [MENU/
SET] .
6Press 3/4 to select the recording method, and then press [MENU/
SET].
7Press the shutter button halfway.
8Press the shutter button fully.
9Move the subject to decide on the composition.
•Repeat recording in the same way.
10To stop the recording, press [MENU/SET], select [Time Lapse/
Animation] in the [Rec] menu, and press [MENU/SET].
•Confirmation screen for creating a motion picture is displayed  next, so select [Yes].
[Auto 
Shooting][ON]
Takes pictures automatically at a set recording interval. When 
the shutter button is pressed fully, recording starts.
[OFF] This is for taking pictures manually, frame by frame.
[Shooting 
Interval] (Only when [Auto Shooting] is set to  [ON])
Sets the interval for automatic recording. A value between 1 an
d 
60 seconds can be set in 1 second intervals.
Press  2/1 to select the recording interval (seconds), press  3/
4 to set it, and press [MENU/SET].
DMC-FZ1000_PPC_eng.book  51 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							52
Recording Modes
SQT0196 (ENG) 
11Select the methods for creating a motion picture.
•The recording format is set to [MP4].
12Press 3/4 to select [OK] and then press [MENU/SET].
∫ Changing the settings of Stop Motion Animation
You can change the settings in [Time Lapse/Animation] in the [R ec] menu.
Functions Customized for Various Subjects and Purposes
Applicable modes: 
This function is useful for recording images in a quiet environment, public facility, etc. or 
recording images of subjects such as babies or animals.
Select the menu.
Settings: [ON]/[OFF]
Applicable modes: 
The center of the recording screen will be displayed as [+]. This 
is convenient for operating the zoom while keeping the subject  at 
the center of the screen.
Settings: [ON]/[OFF]
[Rec Quality] Sets the quality of a motion picture.
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
[Frame Rate]Sets the number of frames per second. The larger the number is,
 
the smoother the motion picture will be.
[60fps]¢/[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
¢ Only when set to [FHD/60p]
[Sequence] [NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
Disabling Operational Sounds and the Output of Light at once ([Silent 
Mode])
> [Custom]  > [Silent Mode]
Displaying the center of the screen ([Center Marker])
> [Custom]  > [Center Marker]
MENU
MENU
DMC-FZ1000_PPC_eng.book  52 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							53
Recording Modes
 (ENG) SQT0196
Applicable modes: 
You can check areas that may be white saturated by displaying areas above a certain 
luminance level in a zebra pattern. You can also set the minimum luminance level (brightness) 
to be processed as a zebra pattern.
Optical Image Stabilizer
The camera detects jitter during recording and automatically corrects it, so you can record 
images with reduced jitter.
Set the O.I.S. switch to [ON].
∫ Setting the Stabilizer in the [Rec] menu
1Select the menu.
2Press 3/ 4 to select the item and then press [MENU/SET].
Checking areas that may be white saturated ([Zebra Pattern])
>[Custom]  > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a 
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a 
left-leaning zebra pattern.
[OFF]—
[SET] Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]Press 
3/4 to select the brightness, and press [MENU/SET].
> [Rec] > [Stabilizer]
[]
([Normal]) Vertical and horizontal shake are compensated for.
[]
([Panning])Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking pictures whi
ch involves 
turning the camera to track the movements of a subject which co ntinues 
to move in a fixed direction).
MENU
MENU
DMC-FZ1000_PPC_eng.book  53 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							54
Recording Modes
SQT0196 (ENG) 
Taking Pictures with the Zoom
Applicable modes: 
You can zoom-out to record landscapes etc. in wide angle (Wide) or zoom-in to make 
people and objects appear closer (Tele).
Zooms in without deteriorating the image quality.
Maximum magnification: 16 k
This function works when any of the picture sizes (P38) indicat ed with   is selected.
You can zoom in further than you can with the Optical Zoom with out deteriorating the 
image quality.
Maximum magnification: 32 k
Applicable modes: 
You can zoom in up to twice the original zoom magnification whi le minimizing the 
deterioration of the image quality.
With the manual ringWith the zoom lever
1 Set the manual ring selector switch to 
[ZOOM].
2 Rotate the manual ring. Rotate the zoom lever.
•
The smaller the rotation angle is, the slower 
the zoom speed becomes; the greater the 
rotation angle is, the faster the zoom speed 
becomes. 
Optical Zoom
Extended Optical Zoom (EX)
Intelligent Zoom
> [Rec] > [i.Zoom]  > [ON]/[OFF]
> [Motion Picture]  > [i.Zoom]  > [ON]/[OFF]
T
W
WT
TW
MENU
MENU
DMC-FZ1000_PPC_eng.book  54 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							55
Recording Modes
 (ENG) SQT0196
Applicable modes: 
Although the image quality deteriorates every time you zoom in further, you can zoom in 
up to four times the original zoom magnification.
Taking pictures by using the flash
Applicable modes: 
∫Open/Close the built-in flash
A To open the flashSlide the flash open lever.
BTo close the flashPress the flash until it clicks.
•
Forcibly closing the flash can damage the 
camera.
•Make sure to close the built-in flash when it is not in use.
•Be careful when opening the flash as the flash will jump out.•Be careful not to catch a finger when closing a flash bulb.
Applicable modes: 
1Select the menu.
2Press  3/4 to select [Flash Mode] and then press [MENU/SET].3Press  3/4 to select the item and then press [MENU/SET].
[Digital Zoom]
> [Rec] > [Digital Zoom]  > [ON]/[OFF]
> [Motion Picture]  > [Digital Zoom]  > [ON]/[OFF]
Changing Flash Mode
> [Rec] > [Flash]
‰([Forced Flash On]) The flash is activated every time regardless  of the recording 
conditions.
•Use this when your subject is back-lit or under 
fluorescent light.([Forced On/Red-
Eye])
([Slow Sync.]) When taking pictures against a dark background landscape,  this feature will slow the shutter speed when the flash is 
activated. Dark background landscape will appear brighter.
([Slow Sync./Red-
Eye])
MENU
MENU
MENU
DMC-FZ1000_PPC_eng.book  55 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							56
Using the Wi-Fi function
SQT0196 (ENG) 
Wi-FiR function/NFC function
∫Describing method
When you see a step that says, “Select [Select a destination fr om History].” or a similar 
step, press the cursor buttons to select [Select a destination from History], and press 
[MENU/SET].
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi 
(When connecting to a smartphone)
•
The information required for connecting the smartphone to this 
unit (QR code, SSID and password) is displayed.
Pressing [Wi-Fi] before connecting to Wi-Fi
•Following items can be selected.
•This Owner’s Manual describes the procedure for [New Connection ].
What you can do with the [Wi-Fi] button when connected to Wi-Fi
•Following items can be selected.
¢ This is not displayed when the destination of [Remote Shooting  & View], [Playback on TV] or 
[Send Images Stored in the Camera]  is set to [Printer] .
•We strongly recommend that you se t an encryption to maintain information security.
•When sending images on a mobile network, high packet communicat ion fees may be incurred 
depending on the details of your contract.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi  connection
[Wi-Fi]/[Fn2] button can be used in two ways, as [Wi-Fi] or 
as [Fn2] (function 2).
At the time of purchase, it is initially set to [Wi-Fi].
[New Connection]
[Select a destination from History]
[Select a destination from Favorite]
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending Images]
¢
[Register the Current Destination to Favorite]
[Network Address]
DMC-FZ1000_PPC_eng.book  56 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							57
Using the Wi-Fi function
 (ENG) SQT0196
Controlling with a Smartphone/Tablet
This Owner’s Manual refers to both smartphones and tablets as “smartphones” from this 
point on unless noted otherwise.
The “ Image App ” is an application provided by Panasonic.
•
OS (As of June 2014)
•Use the latest version.•Read the [Help] in the “ Image App ” menu for further details on  how to operate.•The screen differs depending on the OS.•The screens and procedures described from this point on are tho se at the time when the model first 
became available for purchase. The screens and procedures may c hange with version updates.
•The service may not be able to be used properly depending on the type of smartphone being used.For information on the “ Image App ”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)•When downloading the app on a mobile network, high packet commu nication fees may be 
incurred depending on the details of your contract.
•You can also set up a connection by entering a password directl y. For details, refer to P60.•When terminating the connection, refer to P60.
Installing the smartphone/tablet app “ Image App ”
App for AndroidTM:Android 2.3.3 or higher¢
App for iOS:iOS 5.0 or higher
¢ Connecting to this unit with [Wi-Fi Direct] requires  Android OS  4.0 or higher and Wi-Fi 
Direct
TM support.
1Connect the smartphone to a network.
2(Android) Select “Google PlayTM Store”.
(iOS) Select “App StoreSM”.
3Enter “ Panasonic Image App ” or “LUMIX” into the search box.
4Select “ Panasonic Image App ”   and install it.
Connecting to a smartphone/tablet
If you are using an iOS  device
[iPhone/iPod touch/iPad]
If you are using an Android device
Is your device compatible with the NFC function?
Ye sNo
Using the QR code to set 
up a connection 
≠P58
Setting up a connection using the NFC function
≠P59
Using the QR code to set  up a connection
≠P59
DMC-FZ1000_PPC_eng.book  57 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							58
Using the Wi-Fi function
SQT0196 (ENG) 
1Press and hold [Wi-Fi] on the camera.
2Start “ Image App ” on your smartphone.3Select [QR code], and then select [OK] .
4Using “ Image App ”, scan the QR code 
displayed on the screen of the camera.
AQR code•If you press [MENU/SET] on the camera, the QR code will 
be enlarged. When it is difficult to scan the QR code, try 
enlarging it.
(If the scanning is not successful, move the camera and the 
smartphone further away from each other and try again or 
use a connection method other than the QR code method.)
5Install the profile of “ IMAGE APP ” .
•A message will be displayed on the browser.•If the smartphone is locked with a passcode, enter the 
passcode to unlock the smartphone.
6Press the home button to close the browser.7Turn on the Wi-Fi function in the setting menu of the smartphon e.
8Select the SSID displayed on the screen of the camera.
9Return to the home screen, and then start “ Image App ”. (P57)
•Steps 2 through 6 are not required from the second time on.
If you are using an iOS dev ice [iPhone/iPod touch/iPad]
Using the QR code to set up a connection 
A
IMAGE APPPanasonic Corporation
Wi-Fi
DMC-FZ1000_PPC_eng.book  58 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							59
Using the Wi-Fi function
 (ENG) SQT0196
•If [ ] is not displayed on the smartphone, the NFC function of the smartphone is disabled. 
Read the operating instructions of your smartphone and enable i t.
•This function can be used with the NFC compatible device with A ndroid (OS version 2.3.3 or 
higher). (excluding some models)
1Launch “ Image App ” on your smartphone.2While  [ ]  is displayed on the screen of the 
smartphone, touch the smartphone to  [ ] 
of  the camera.
3When the connection confirmation screen 
is displayed on the camera, select [Yes].
4Touch the smartphone to [ ] of the camera 
again.
•
Steps 3 through 4 are not required from the second 
time on.
•For information on the operation and settings of NFC-
compatible smartphones, refer to the operating 
instructions of your device.
1Press and hold [Wi-Fi] on the camera.
2Start “ Image App ” on your smartphone.
3Select [QR code].
4Scan the QR code displayed on the screen of 
the camera.
A QR code•If you press [MENU/SET] on the camera, the QR code will 
be enlarged. When it is difficult to scan the QR code, try 
enlarging it.
(If the scanning is not successful, move the camera and 
the smartphone further away from each other and try again 
or use a connection method other than the QR code 
method.)
When using an Android device
Setting up a connection using the NFC function
When using an Android device
Using the QR code to set up a connection 
A
DMC-FZ1000_PPC_eng.book  59 ページ  ２０１４年５月３０日　金曜日　午後５時９分 
						

							60
Using the Wi-Fi function
SQT0196 (ENG) 
1Press and hold [Wi-Fi] on the camera.2Turn on the Wi-Fi function in the setting menu of the 
smartphone.
3Select the SSID displayed on the screen of the 
camera.
ASSID and password
4Enter the password displayed on the screen of the 
camera.
•
If you are using an Android device, marking the box for passwor d 
display will allow the device to display the password as you en ter it.
5On the smartphone, start “ Image App ”.
After use, terminate the connection to the smartphone.
1Press [Wi-Fi] on the camera. (P56)
2On the smartphone, close “ Image App ”.
For both iOS devices (iPhone/iP od touch/iPad) and Android devic es
Entering a password to set up a connection
For both iOS devices (iPhone/iPod touch/iPad) and Android devic es
Terminating the connection
If you are using an iOS deviceOn the screen of “ Image App ”, press the home button to close the app.
If you are using an Android deviceOn the screen of “ Image App ”, press the return button twice to  close the app.
A
Wi-Fi
0123456789ABC
DMC-FZ1000_PPC_eng.book  60 ページ  ２０１４年５月３０日　金曜日　午後５時９分