Home > Panasonic > Digital Camera > Panasonic Dmc Fz1000 Basic Owners Manual

Panasonic Dmc Fz1000 Basic Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Dmc Fz1000 Basic Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							81
    Others
     (ENG) SQT0196
    •When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed 
    may introduce slight changes to brightness and color. These are  a result of the characteristics 
    of the light source and do not indicate a malfunction.
    •When recording subjects in extremely bright locations or record ing under fluorescent lighting, 
    LED lighting fixture, mercury lamp, sodium lighting, etc., the  colors and screen brightness may 
    change or horizontal striping may appear on the screen.
    •You may not be able to record for a short while after turning t his unit on when using a large 
    capacity card.
    •Depending on the environment at the time of motion picture reco rding, the screen may be 
    blacked out momentarily or the unit may record noise due to sta tic electricity or powerful 
    electromagnetic waves (radio towers, high voltage power lines,  etc.).
    •Is the flash closed?
    >Open the flash. (P55)
    •When the electronic shutter is used, the flash is not activated .
    > Set [Shutter Type] to [AUTO] or [MSHTR].
    •When [Silent Mode]  is set to  [ON] , the flash is not activated.  (P52)
    > Set [Silent Mode] to [OFF].
    •Is the card inserted?•Is there a picture on the card?
    •Is this a folder or picture which was processed in the PC?
    If it is, it cannot be played back by this unit.
    >It is recommended to use the “ PHOTOfunSTUDIO ” software in the D VD (supplied) to write 
    pictures from PC to card.
    •Has [Playback Mode] been set for playback?
    > Change to [Normal Play].
    •Is this a non-standard picture, a picture which has been edited  using a PC or a picture which 
    was taken by another make of digital camera?
    •Did you remove the battery immediately after picture-taking or did you take the picture using a 
    battery with a low remaining charge?
    > To delete such pictures, make a backup of the data and format t he card.
    The brightness or the hue of the recorded picture is different  from the actual 
    scene.
    Recording motion pictures is not possible.
    The screen may be blacked out momentarily, or the unit may record noise.
    The flash is not activated.
    The picture is not played back.
    There are no recorded pictures.
    The folder number and the file number are displayed as [—] and  the screen turns 
    black.
    DMC-FZ1000_PPC_eng.book  81 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							82
    Others
    SQT0196 (ENG) 
    •The picture quality or sound quality of recorded motion pictures may be deteriorated even when 
    these are played back with the compatible devices. Also, record ing information may not be 
    displayed correctly.
    ∫ General tips for using a Wi-Fi connection
    •Try [Reset Wi-Fi Settings] in the [Setup] menu.•Use within the communication range of the device to be connecte d.•Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency 
    operated nearby?
    >Radio waves may get interrupted when used simultaneously. Use t hem sufficiently away 
    from the device.
    •When the battery indicator is flashing red, the connection with  other equipment may not start or 
    the connection may be disrupted.
    (A message such as [Communication error] is displayed.)
    •If you place the camera on a metal table or shelf, the radio wa ves may be adversely affected. In such 
    cases, you may not be able to establish a connection. Move the  camera away from the metal surface.
    ∫About a wireless access point
    •Check if the wireless access point to connect is in operating s tate.•The camera may not display or connect to a wireless access poin t depending on the radio 
    wave condition.
    > Move this unit closer to the wireless access point.
    > Remove the obstacles between this unit and the wireless access  point.
    > Change the direction of this unit.
    > Change the location and orientation of the wireless access poin t.
    > Perform the [Manual Input].
    •It may not display even if the radio waves exist depending on t he setting of the wireless access point.>Check the settings of the wireless access point.
    > When the network SSID of the wireless access point is set not to broadcast, the wireless 
    access point may not be detected. Enter the network SSID to sta rt the connection or enable 
    the SSID broadcast of the wireless access point.
    •Connection types and security setting methods are different dep ending on the wireless access 
    point. (Refer to the operating instructions of the wireless acc ess point.)
    •Is the 5 GHz/2.4 GHz switchable wireless access point connected t o other equipment using the 
    5 GHz band?
    > The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is 
    recommended. It cannot be used simultaneously with this camera  if it is not compatible.
    •When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not 
    be possible.
    Motion pictures recorded with this model cannot be played back  on other equipment.
    A Wi-Fi connection cannot be established.
    Radio waves get disconnected.
    Wireless access point is not displayed.
    Images cannot be transmitted to a PC.
    DMC-FZ1000_PPC_eng.book  82 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							83
    Others
     (ENG) SQT0196
    •Some OS versions, including Windows 8, use two types of accounts: a local account and a 
    Microsoft acc ount.
    > Be sure to use the user name and password for the local account .
    If you haven’t set up a local account, please create one.
    •Image cannot be transmitted when the battery indicator is flash ing red.•Is the size of the image too large?
    >Reduce the image size at [Size], and then send.
    > Transmit after dividing the motion picture with [Video Divide].
    •File format of the motion picture that can be sent differs depe nding on the destination.•Capacity or number of images in the web service is full.
    >Login to “LUMIX CLUB”, and check the status of the destination on the web service link settings.
    •Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?>Connect the camera to the TV with the AV  cable (optional), or w ith the HDMI micro cable, 
    and then play back the motion pictures on the camera. (P65)
    •Is it connected properly with the HDMI micro cable? (P65)•Is the [VIERA Link] on this unit set to [ON]?
    >If the input channel does not switch automatically, use the rem ote control for the TV to switch it.>Check the VIERA Link setting on the connected device.
    > Turn this unit off and on.
    > Set [HDAVI Control] to [Off] on the TV and then turn it back to  [On].
    (Refer to the operating instructions of the TV for details.)
    •It is a sound of lens movement or aperture operation when this  unit is turned on or off, and it is 
    not a malfunction.
    •The sound, which is caused by the automatic adjustment of the a perture, is heard when the brightness 
    has changed due to, for example, zooming or the movement of the  camera. This is not a malfunction.
    •The surface of the camera and the reverse side of the monitor may become warm during use. 
    This does not affect the performance or quality of the camera.
    •If you do not use the camera for a long time, the clock may be  reset.
    > [Please set the clock] message will be displayed; please reset  the clock. (P18)
    •When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a malfunction.
    When I try to set up a Wi-Fi connection with a Windows 8 PC, my  user name and 
    password are not recognized, so I cannot connect to the PC.
    Transmission of the image fails midway. Some images cannot be t ransmitted.
    The motion pictures cannot be played back on a TV.
    VIERA Link does not work.
    There is a sound from lens unit.
    The camera becomes warm.
    The clock is reset.
    Zooming stops instantaneously.
    DMC-FZ1000_PPC_eng.book  83 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							84
    Others
    SQT0196 (ENG) 
    Specifications
    Specifications are subject to change without notice.
    Digital Camera:
    Information for your safetyPower Source: DC 8.4 V
    Power Consumption: 2.4 W (When recording with Monitor)
    2.8 W (When recording with Viewfinder)
    1.7 W (When playing back with Monitor)
    1.7 W (When playing back with Viewfinder)
    Camera effective pixels 20,100,000 pixels
    Image sensor 1q MOS sensor, total pixel number 20,900,000 pixels, 
    Primary color filter
    Lens Optical 16k zoom, f = 9.12 mm to 146 mm
    (35 mm film camera equivalent: 25 mm to 400 mm)
    Wide: F2.8 to F8.0 (when recording motion pictures: F2.8 to F11 )Tele: F4.0 to F8.0 (when recording motion pictures: F4.0 to F11)
    Image StabilizerOptical method
    Focus range AF 30 cm (0.98 feet) (Wide)/1 m (3.3 feet) (Tele) to  ¶
    AF Macro/MF/
    Intelligent Auto/
    Motion Picture 3 cm (0.098 feet) (Wide)/1 m (3.3 feet) (Tele) to 
    ¶
    Shutter system Electronic shutteriMechanical shutter
    Minimum Illumination Approx. 9 lx (when i-Low light is used, the shutter speed is 
    1/30th of a second)
    Shutter speed Still picture B (Bulb) (Max. approx. 120 second),
     60 to 1/4000th seconds (with the mechanical shutter)
    1 to 1/16000th seconds (with the electronic shutter)
    Motion picture 1/25th seconds to 1/16000th of a second  (when [FHD/24M/24p] in [AVCHD] is set)
    1/2th seconds to 1/16000th of a second 
    (when [M] is selected in Creative Video Mode, MF)
    1/30th seconds to 1/16000th of a second (other than the above)
    Exposure (AE)Program AE (P)/Aperture-priority AE (A)/Shutter-priority AE (S) /
    Manual exposure (M)/AUTO
    Light metering mode Multiple/Center weighted/Spot
    Monitor 3.0q Monitor (3:2) (Approx. 920,000 dots)
    (field of view ratio about 100%)
    DMC-FZ1000_PPC_eng.book  84 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							85
    Others
     (ENG) SQT0196
    ViewfinderOLED Live Viewfinder (4:3) (Approx. 2,360,000 dots)
    (field of view ratio about 100%)
    (with diopter adjustment j4 to i4 diopter)
    FlashBuilt-in pop up flash
    AUTO, AUTO/Red-Eye Reduction, Forced ON, Forced ON/ 
    Red-Eye Reduction, Slow Sync., Slow Sync./Red-Eye 
    Reduction, Forced OFF
    Microphone Stereo
    Speaker Monaural
    Recording media SD Memory Card/SDHC Memory Card
    ¢/SDXC Memory Card¢ 
    (¢UHS-I UHS Speed Class 3)
    Recording file format Still Picture RAW/JPEG (based on “Design rule for Camera File system”, 
    based on “Exif 2.3” standard, DPOF corresponding)
    Motion pictures AVCHD Progressive/AVCHD/MP4
    Audio compression AVCHD Dolby
    R Digital (2 ch)
    MP4 AAC (2 ch)
    Interface Digital “USB 2.0” (High Speed)
    Analog video/audio NTSC
    Audio line output (monaural)
    Terminal [MIC] ‰ 3.5 mm jack
    [REMOTE] ‰ 2.5 mm jack
    [AV OUT/DIGITAL] Dedicated jack (8 pin)
    [HDMI] MicroHDMI Type D
    Dimensions Approx. 136.8 mm (W)k98.5 mm (H) k130.7 mm (D)
    [5.39 q (W)k3.88 q(H) k5.15 q (D)]
    Mass (weight) Approx. 831g/1.83 lb (with card and battery)
    Approx. 780 g/1.72 lb (excluding card and battery)
    Operating temperature
    0oC to 40oC (32  oF to 104  oF)
    Operating humidity 10%RH to 80%RH
    Language select [ENGLISH]/[ESPAÑOL](DMC-FZ1000P)
    [ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/
    [PORTUGUÊS]/[ITALIANO]/[ 繁體中文]/[¢ ]
    (DMC-FZ1000PC)
    SQT0196~Body3_eng.fm  85 ページ  2014年6月16日 月曜日 午後3時20分 
    						
    							86
    Others
    SQT0196 (ENG) 
    Wireless transmitter
    NFC
    Battery Charger (Panasonic DE-A79B):
    Information for your safety
    Equipment mobility:
    Movable
    Battery Pack (lithium-ion) (Panasonic DMW-BLC12PP):
    Information for your safetyCompliance standard
    IEEE 802.11b/g/n (standard  wireless LAN protocol)
    Frequency range used 
    (central frequency) 2412 MHz to 2462 MHz (1 to 11ch)
    Encryption method Wi-Fi compliant WPA
    TM/WPA2TM
    Access methodInfrastructure mode
    Compliance standard ISO/IEC 18092 NFC-F (Passive Mode)
    Input: 110 V to 240 V, 50/60 Hz, 0.2 A
    Output: 8.4 V, 0.65 A
    Voltage/capacity: 7.2 V/1200 mAh
    DMC-FZ1000_PPC_eng.book  86 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							87
    Others
     (ENG) SQT0196
    Digital Camera Accessory System
    ¢The AC Adaptor (optional) can only be used with the designated  Panasonic DC Coupler 
    (optional). The AC adaptor (optional) cannot be used by itself.
    Product numbers correct as of June 2014. These may be subject t o change.
    •Some optional accessories may not be available in some countrie s.
    •NOTE: Accessories and/or model numbers may vary between countrie s. Consult your local 
    dealer.
    DescriptionAccessory#
    Battery Pack DMW-BLC12
    AC Adaptor
    ¢DMW-AC10
    DC Coupler¢DMW-DCC8
    MC Protector DMW-LMCH62
    ND Filter DMW-LND62
    PL Filter (Circular Type) DMW-LPL62
    Flash
    DMW-FL360L, DMW-FL580L
    LED Video Light VW-LED1
    Stereo Shotgun Microphone DMW-MS2
    Stereo Microphone VW-VMS10
    Remote Shutter DMW-RSL1
    USB connection Cable DMW-USBC1
    AV Cable DMW-AVC1
    DMC-FZ1000_PPC_eng.book  87 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							88
    Others
    SQT0196 (ENG) 
    Reading the Owner’s Manual (PDF format)
    •Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes 
    more detailed information.
    More detailed instructions on the operation of this camera are contained in 
    “Owner’s Manual for advanced features (PDF format)” in the supp lied DVD. 
    Install it on your PC to read it.
    ∫ For Windows
    1Turn the PC on and insert the DVD containing the Owner’s Manual  
    (supplied).
    2Click the [Owner’s Manual].
    3Select the desired language and then click 
    [Owner’s Manual] to install.
    A To return to the install menu.
    4Double click the “Owner’s Manual” 
    shortcut icon on the desktop.
    ∫When the Owner’s Manual (PDF format) will not open
    You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader  7.0 or  later to brows e or 
    print the Owner’s Manual (PDF format).
    •
    You can download and install a version of Adobe Reader that you  can use with your OS from 
    the following Web Site.
    http://get.adobe.com/reader/otherversions
    ∫ To uninstall the Owner’s Manual (PDF format)
    Delete the PDF file from the “Program Files\Panasonic\Lumix\” f older.
    ∫ For Mac
    1Turn the PC on and insert the DVD containing the Owner’s Manual  
    (supplied).
    2Open the “Manual” folder in the DVD.
    • “Manual” folder is displayed again.
    3Open the “Manual” folder in the DVD and then copy the PDF file  with 
    the desired language inside the folder.
    4Double click the PDF file to open it.
    A
    DMC-FZ1000_PPC_eng.book  88 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							89
    Others
     (ENG) SQT0196
    Digital Camera Accessory Order Form (For USA Customers)
    Ship To: 
    Mr.
    Mrs.
    Ms.First Last
    Street Address 
    City State Zip
    Phone#: 
    Day  ( )
    Night ()
    4. Shipping information (UPS delivery requires complete street address)\
            
    Please photocopy this form when placing an order.
    3. Method of payment (check one)     
    American Express
    VISA                          
    MasterCard         
    (Please do not send cash)    
    2. Items Ordered  
    Quantity
    Accessory #  Price Each Description Total Price 
    $6.95
    Subtotal
    Your State & Local Sales Tax Shipping & Handling
    To t a l
    1. Digital Camera Model #   
    Discover          
    Expiration Date  Credit Card #  
    Customer Signature 
    TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF 
    THE FOLLOWING: 
    VISIT YOUR LOCAL PANASONIC DEALER  OR 
    YOU MAY CONTACT US DIRECTLY AT: 1-800-237-9080 (FAX ONLY)  OR 
    MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER 20421 84th Avenue South, Kent, WA 98032
    DMC-FZ1000_PPC_eng.book  89 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    							90
    Others
    SQT0196 (ENG) 
    Limited Warranty (ONLY FOR U.S.A.)
    Panasonic Products Limited Warranty
    Limited Warranty Coverage (For USA Only) 
    If your product does not work properly because of a defect in materials or workmanship, 
    Panasonic Corporation of North America (referred to as “the war rantor”) will, for the length 
    of the period indicated on the chart below, which starts with t he date of original purchase 
    (“warranty period”), at its option either (a) repair your produ ct with new or refurbished 
    parts, (b) replace it with a new or a refurbished equivalent va lue product, or (c) refund your 
    purchase price. The dec ision to repair, replace or refund will  be made by the warrantor.
    During the “Labor” warranty period there will be no charge for  labor. During the “Parts” 
    warranty period, there will be no  charge for parts. This Limited Warranty excludes both 
    parts and labor for non-rechargeable batteries, antennas, and c osmetic parts (cabinet). 
    This warranty only applies to products purchased and serviced i n the United States. This 
    warranty is extended only to the original purchaser of a new product which was not sold 
    “as is”. 
    Product or Part Name PartsLabor
    Digital Camera (DMC-FZ1000) 1 Year1 Year
    All included Accessories
    (Except Non-Rechargeable Batteries) 90 Days Not Applicable
    Only Non-Rechargeable Batteries 10 Days Not Applicable
    DMC-FZ1000_PPC_eng.book  90 ページ  2014年5月30日 金曜日 午後5時9分 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Dmc Fz1000 Basic Owners Manual