Panasonic Dmc G10k Operating Instructions Manual

							131VQT2S62
Advanced (Playback)
Note
•Sound can be heard through the speaker. Refer to [VOLUME] (P31) for information about how 
to adjust the volume in the [SETUP] menu.
•Pictures with audio recorded with other equipment may not play back on this unit.
Using the [PLAYBACK] Mode Menu
You can use various functions in Playback Mode  to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [ASPECT CONV.], a new edited picture is 
created. A new picture cannot be created if there is no free space on the card so we 
recommend checking that there is free space and then editing the picture.
You can play back the pictures you have tak en in synchronisation with music, and you can 
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show composed of only still pictures, only motion 
pictures, only pictures of a particular category, or only favorites.
We recommend this feature when you view your  pictures by connecting the camera to a 
TV.
Select [SLIDE SHOW] on the [PLAYBACK] Mode menu. (P28)
Press  3/4 to select the item and then press 
[MENU/SET].
•[FAVORITE] can be selected only when [FAVORITE] on the 
[PLAYBACK] menu (P134) is at [ON] and there are pictures 
already set as favorites.
•During [CATEGORY SELECTION], press 3 /4/ 2/1 to select 
a category, and then press [MENU/SET] to proceed to step 3.
For details on categories, refer to P133.
Pictures with audio
Press  2/1 to select a picture with the audio icon [ ] 
and then press  3 to play back.
AAudio icon•Refer to [AUDIO REC.] (P122) for information about how to create still 
pictures with audio.
 [SLIDE SHOW]
A
DMC-G10KPP-VQT2S62_eng.book  131 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62132
Advanced (Playback)
∫Operations performed during slide show
The cursor displayed during playback is the same as  3/4/2/1 .
•
The menu screen is restored when [‚ ] is pressed.
∫Changing the slide show settings
You can change the settings for slide show playback by selecting 
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from 
one picture to the next.
[NATURAL], [SWING], [URBAN], [OFF]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
•[EFFECT] is set to [OFF] when playing a slide show with motion pictures only.•Some [EFFECT] will not operate when playin g back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
Note
•It is not possible to add new music.
Press 3 to select [START] and then press 
[MENU/SET].
Press 4 to finish the slide show.
•Normal Playback resumes after the slide show finishes.
A Play/Pause
B St op
C Back to previous picture
¢
DAhead to next picture¢
¢ These operations can be performed only in the Pause Mode or 
during motion picture playback.
E Reduce volume level
F Increase volume level
ItemSettings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] OFF/ON
[SOUND] [OFF]: There will be no sound.
[AUTO]:
Music is played when the 
still pictures are played 
back, and audio is played when the motion pictures 
or still pictures with audio are played back.
[MUSIC]: Music is played back.
[AUDIO]: Audio (only for motion pictures and still pictures with 
audio) is played back.
DMC-G10KPP-VQT2S62_eng.book  132 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							133VQT2S62
Advanced (Playback)
Playback in [NORMAL PLAY], [PICTURE PLAY], [VIDEO PLAY], [CATEGORY PLAY] or 
[FAVORITE PLAY] can be selected.
Select [PLAYBACK MODE] on the [PLAYBACK] Mode menu. (P28)
Press 3/4 to select the item and then press 
[MENU/SET].
•[FAVORITE PLAY] can be selected only when [FAVORITE] on 
the [PLAYBACK] menu (P134) is at [ON] and there are pictures 
already set as favorites.
•Refer to P49 for information about how to play back pictures in 
[NORMAL PLAY], [PICTURE PLAY], [VIDEO PLAY] or [FAVORITE PLAY] can be 
selected.
When [CATEGORY PLAY] is selected in step 2
Press  3/4/ 2/1 to select the category and then 
press [MENU/SET] to set.
•If a picture is found in a category, the category icon turns blue.•It may take time to search the picture files if there are a lot on 
the card.
•If you press [ ‚] while searching, the searching will stop 
halfway.
•Pictures are sorted into the categories shown below.
¢ Press  3/4/2 /1  to select the person to playback and then press [MENU/SET].
Face Recognition may not be possible or may not recognize faces correctly even for 
registered faces, depending on the facial expression and environment.
Also, if there are multiple faces that are already registered in the picture, it will be 
categorized only once to the person found first in the registration.
   [PLAYBACK MODE]
[CATEGORY]Recording information 
e.g. Scene Modes[CATEGORY]Recording information e.g. Scene Modes
[FACE RECOG.]
¢Î[BABY1]/[BABY2], 
[i-BABY]
*
[PORTRAIT], 
[i-PORTRAIT], 
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[BABY1]/[BABY2], 
[i-BABY]
í
[PET]
,[SCENERY], 
[i-SCENERY], [SUNSET], 
[i-SUNSET]1[FOOD]
.[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[i-NIGHT SCENERY] [TRAVEL DATE]
[SPORTS], [PARTY]
Í[MOTION PICTURE]
DMC-G10KPP-VQT2S62_eng.book  133 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62134
Advanced (Playback)
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back the pictures set as favorites only as a slide show.•Play back only the pictures set as favorites. ([FAVORITE PLAY])•Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] Mode menu. (P28)
∫Canceling all the [FAVORITE] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set as a favorite.•[CANCEL] cannot be selected when in [PLAYBACK MODE].
Note
•You can set up to 999 pictures as favorites.•When printing pictures at a photo printing store, [ALL DELETE EXCEPT Ü] (P53) is useful so 
only the pictures you want to be printed remain on the card.
•You may not be able to set pictures taken with other equipment as favorites.•The pictures that were taken with the [QUALITY] set to [ ] cannot be set to [FAVORITE].
Ü  [FAVORITE]
Press 4 to select [ON] and then press 
[MENU/SET].
•You cannot set pictures as favorites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to [OFF] 
even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press 2/ 1 to select the picture and then press 4  
to set it during playback.
•Repeat the above procedure.•If  4 is pressed again, the favorite setting is canceled.
DMC-G10KPP-VQT2S62_eng.book  134 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							135VQT2S62
Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P136). (Only alphabetic characters and symbols can be 
entered.)
Select [TITLE EDIT] on the [PLAYBACK] Mode menu. (P28)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Enter the text. (P129)
Press [‚ ] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
Note
•To delete the title, erase all the text in the text input screen.•Text can be scrolled if all of the registered text does not fit on the screen.•You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the 
CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use title edit for the following pictures.–Motion pictures–Protected pictures–Pictures taken with [ ], [ ] or [ ]–Pictures recorded with other equipment
  [TITLE EDIT]
Select the picture, and then 
press [MENU/SET] to set.
•[ ’ ] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1  to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
•
The setting is canceled when [DISPLAY] is pressed again.
DMC-G10KPP-VQT2S62_eng.book  135 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62136
Advanced (Playback)
You can stamp the recording date/time, name, location, travel date or title onto the 
recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] Mode menu. (P28)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press 3/ 4 to select text stamp items, and then press  1.
 [TEXT STAMP]
Select the picture, and then 
press [MENU/SET] to set.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set.
•
The setting is canceled when 
[DISPLAY] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to select 
the picture. Press 
3/4/ 2/1 to 
select the pictures.
DMC-G10KPP-VQT2S62_eng.book  136 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							137VQT2S62
Advanced (Playback)
Press 3/4 to select the settings, and then press [MENU/SET].
Press [MENU/SET].
•If you set [TEXT STAMP] for a picture with a picture size larger than [S], the picture size 
will become smaller as shown below.
•When selecting [ ] or [ ], press 3 to select [YES] for stamping [AGE], and then 
press [MENU/SET] and proceed to step 7.
Press  3 to select [YES] and then press 
[MENU/SET].
•The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [S].
Press [‚ ] to return to the menu screen.¢
¢The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
ItemSetting item
[SHOOTING DATE] [OFF]
[W/OTIME]:
Stamp the year, month and date.
[WITHTIME]: Stamp the year, month, day, hour and 
minutes.
[NAME] [OFF]
[]:
Name registered in Face Recognition will be 
stamped.
[]: Stamps names on pictures that already have 
been registered name settings of [BABY1]/
[BABY2] or [PET] in Scene Mode.
[LOCATION]
[OFF]
[ON]:
Stamps the travel destination name set under 
[LOCATION].
[TRAVEL DATE] [OFF]
[ON]:Stamps the travel date set under 
[TRAVEL DATE].
[TITLE]
[OFF]
[ON]:
Title input in the [TITLE EDIT] will be stamped.
Aspect ratio settingPicture size
X
/ > 
Y/ > 
W/ > 
/ > 
DMC-G10KPP-VQT2S62_eng.book  137 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62138
Advanced (Playback)
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures with audio–Pictures recorded without setting the clock and title–Pictures that were previously stamped with [TEXT STAMP]–Pictures taken with [ ], [ ] or [ ]–Pictures recorded with other equipment
DMC-G10KPP-VQT2S62_eng.book  138 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							139VQT2S62
Advanced (Playback)
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
Select [RESIZE] on the [PLAYBACK] Mode menu. (P28)
Press 3 to select [YES] and then press 
[MENU/SET].
Press [‚ ] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is 
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures, pictures with audio, pictures stamped with [TEXT STAMP] and pictures taken 
with [ ], [ ] or [ ] cannot be resized.
Q  [RESIZE] Reducing the picture size (number of pixels)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting1Press  2/1 to select the picture, and 
then press [MENU/SET].
2Press  2/1 to select the size¢, and 
then press [MENU/SET].
¢ Only the sizes to which the pictures can be 
resized is displayed.
[SINGLE]
[MULTI] setting
1Press  3/4  to select the size, and then 
press [MENU/SET].
2Press  3/4/2/1  to select the picture, 
and then press [DISPLAY].
•
Repeat this step for each picture, and 
press [MENU/SET] to set.
[MULTI]
DMC-G10KPP-VQT2S62_eng.book  139 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62140
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [CROPPING] on the [PLAYBACK] Mode menu. (P28)
Press [MENU/SET].
Press 3 to select [YES] and then press 
[MENU/SET].
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of the cropped picture may become smaller than 
that of the original picture.
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•Motion pictures, pictures with audio, pictures  stamped with [TEXT STAMP] and pictures taken 
with [ ], [ ] or [ ] cannot be cropped.
•Information regarding the Face Recognition in  the original picture will not be copied to images 
having undergone [CROPPING].
  [CROPPING]
Press 2/ 1 to select the picture, and then press 
[MENU/SET].
Use the rear dial and press 
3/ 4/2/1 to select the parts 
to be cropped.
Rear dial (right): 
Enlargement
Rear dial (left): Reduction
3 /4/ 2/1: Move Reduction
Enlargement
()
Move the position
()
DMC-G10KPP-VQT2S62_eng.book  140 ページ  ２０１０年４月２３日　金曜日　午後８時０分