Panasonic Dmc G10k Operating Instructions Manual

							141VQT2S62
Advanced (Playback)
You can convert pictures taken with a [W] aspect ratio to a [ Y], a [ X] or a [ ] aspect 
ratio.
Select [ASPECT CONV.] on the [PLAYBACK] Mode menu. (P28)
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•After converting the aspect ratio, the picture size may become larger than that of the original 
picture.
•You may not be able to convert pictures taken on other equipment.•The [ASPECT CONV.] cannot be performed on  the motion pictures, pictures with audio, 
pictures stamped with [TEXT STAMP] and pictures taken with [ ], [ ] or [ ].
•Information regarding the face recognition in the original picture will not be copied to images 
having undergone [ASPECT CONV.].
?  [ASPECT CONV.]
Press  3/4 to select [ Y], [X ] or [ ] and then 
press [MENU/SET].
Press  2/1 to select a picture taken with [ W] 
aspect ratio, and then press [MENU/SET].
Press  2/1 to determine the horizontal position, 
and press [MENU/SET] to set.
•Use  3/4  to set the frame position for pictures rotated vertically.
Press  3 to select [YES] and then press 
[MENU/SET].
DMC-G10KPP-VQT2S62_eng.book  141 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62142
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically or rotate pictures manually in 90 o steps.
Select [ROTATE] on the [PLAYBACK] Mode menu. (P28)
•The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press 2/ 1 to select the picture and then press 
[MENU/SET].
•Motion pictures and protected pictures cannot be rotated.
Press 3/ 4 to select the direction to rotate the 
picture and then press [MENU/SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu. (P28)
Note
•[ROTATE DISP.] can only be used with the lens (P15) compatible with the Direction Detection 
Function (P36).
•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•The display is not rotated during Multi Playback (P50).•Pictures recorded with the camera upside down will not be displayed rotated.
N  [ROTATE]/ M [ROTATE DISP.]
Rotate (The picture is rotated manually)
: The picture rotates clockwise in steps of 90 o.
: The picture rotates counter-clockwise in steps of 90 o.
Rotate display (The picture is automatically rotated and displayed)
Press 4 to select [ON] and then press 
[MENU/SET].
•The pictures are displayed without being rotated when you 
select [OFF].
•Refer to P49 for information about how to play back pictures.
Press [MENU/SET] to close the menu.
DMC-G10KPP-VQT2S62_eng.book  142 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							143VQT2S62
Advanced (Playback)
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to print and whether or not to print the recording 
date on the pictures when using a DPOF compat ible photo printer or photo printing store. 
For details, ask at your photo printing store.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [PRINT SET] on the [PLAYBACK] Mode menu. (P28)
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫Canceling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
•Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures stamped with text.
  [PRINT SET]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then 
press [MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
DMC-G10KPP-VQT2S62_eng.book  143 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62144
Advanced (Playback)
Note
•The number of prints can be set from 0 to 999.•With a printer supporting PictBridge, the date print settings of the printer may take precedence 
so check if this is the case.
•It may not be possible to use the print settings with other equipment. In this case, cancel all the 
settings, and reset the settings.
•If the file is not based on the DCF standard, the print setting cannot be set.•[PRINT SET] cannot be set for pictures that were taken with the [QUALITY] set to [ ].
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu. (P28)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while canceling pr otection, the canceling will stop halfway.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures on a card, t hey will be deleted if the card is formatted.•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
P [PROTECT]
Press 3/ 4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then 
press [MENU/SET].
When [MULTI] has been selected
•Repeat these steps for each picture.•The settings are canceled when 
[MENU/SET] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to select 
the picture. Press 
3/4/ 2/1 to 
select the pictures.
DMC-G10KPP-VQT2S62_eng.book  144 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							145VQT2S62
Advanced (Playback)
You can clear and replace all information relating to face recognition in selected images.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P28)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a pict ure has been canceled, the picture will not be 
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
  [FACE REC EDIT]
Press  3/4 to select [REPLACE] or [DELETE] and 
then press [MENU/SET].
Press  2/1 to select the picture and then press 
[MENU/SET].
•You cannot select pictures for which Face Recognition 
information has not been registered.
Press  2/1 to select the person and then press 
[MENU/SET].
•[DELETE]  > step6.•You cannot select a person who has not been registered.
Press  3/4/ 2/1 to select the person to replace 
and then press [MENU/SET].
Press  3 to select [YES] and then press 
[MENU/SET].
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
DMC-G10KPP-VQT2S62_eng.book  145 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62146
Connecting to other equipment
Connecting to other equipmentPlaying Back Pictures on a TV Screen
1Yellow: to the video input socket
2 White: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
Connect the AV cable  B (supplied) to the video input and the audio 
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on and then press [ (].
Note
•Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or 
the left and right of the pictures.
•Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system 
when you set [VIDEO OUT] in the [SETUP] menu.
•Audio will be played back in monaural.•The viewfinder cannot be displayed when connected with a AV cable.
Playing back pictures using the AV cable (supplied)
Preparations: Set the [TV ASPECT]. (P33)
Turn this unit and the TV off.
DMC-G10KPP-VQT2S62_eng.book  146 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							147VQT2S62
Connecting to other equipment
The recorded still pictures can be played back on a TV with an SD Memory Card slot.Note
•
Depending on the TV model, pictures may not be displayed on the full screen.•Motion pictures cannot be played back. To play back motion pictures, connect the camera to 
the TV with the AV cable (supplied).
•SDHC Memory Cards cannot be played back unle ss it is a TV compatible with SDHC Memory 
Cards or SDXC Memory Cards.
•SDXC Memory Cards cannot be played back unless it is a TV compatible with SDXC Memory 
Cards.
You can enjoy high quality pictures and mo tion pictures on the TV by connecting the 
camera with the HDMI compatible high-definition TV using HDMI mini cable (optional).
Playing back pictures on a TV with an SD Memory Card slot
Playing back on the TV with HDMI socket
What is HDMI?
HDMI is the interface for digital devices.  When this unit is connected to a HDMI 
compatible device, the image and audio can be output with a digital signal. If you 
connect this unit to a HDMI compatible high-definition TV and then play back the 
recorded high-definition images, you can enjoy them in high resolution with high quality 
sound.
If you connect this unit to a Panasonic TV compatible with VIERA Link, linked 
operations (VIERA Link) are possible. (P149)
Preparations: Check the [HDMI MODE]. (P34) Turn this unit and the TV off.
1 HDMI socket
2 TV with HDMI socket
3 HDMI mini (C type)
A  Align the marks, and insert.
B  HDMI mini cable (optional)
•
Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result 
in malfunction if it is plugged in obliquely or in the wrong direction.)
Connect the HDMI mini cable  B (optional) to the HDMI input socket 
on the TV.
HDMI IN
DMC-G10KPP-VQT2S62_eng.book  147 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62148
Connecting to other equipment
Note
•Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left 
and right of the pictures.
•Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, 
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•Output from the HDMI mini cable has priority  when both AV cable and HDMI mini cable are 
connected.
•HDMI output is not possible even if you con nect the HDMI mini cable while the unit is 
connected to the PC or the printer.
•HDMI connection is disabled and the connection with the USB connection cable will take 
priority when you connect the USB connection cable while it is outputting via the HDMI mini 
cable.
•During HDMI output, no picture is displayed on the LCD monitor or viewfinder.•When pictures are displayed, they may not be displayed properly depending on the type of TV.•Read the operating instructions for the TV.•Audio will be played back in monaural.
Connect the HDMI mini cable to the [HDMI] socket on the camera.
Turn the TV on and switch to HDMI input.
Turn the camera on and then press [ (].
•When [VIERA Link] (P34) is set to [ON] and the camera is connected to a TV supporting 
VIERA Link, input of the TV will be switched automatically and playback screen will be 
displayed (P149).
DMC-G10KPP-VQT2S62_eng.book  148 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							149VQT2S62
Connecting to other equipment
Connect this unit to a Panasonic TV compatible with VIERA Link with 
a HDMI mini cable (optional) (P147).
Turn the camera on and then press [(].
Operate with the remote control for the TV.
Panasonic TV compatible with VIERA Link
¢ The shape of the remote control varies depending on the region. Operate following the TV 
guide displayed on screen.
Playback using VIERA Link (HDMI) (HDAVI Control™)
What is the VIERA Link?
•
VIERA Link™ is a new name for EZ Sync™.•This function allows you to use your remote control for the Panasonic TV for easy 
operations when this unit has been connected to a VIERA Link compatible device using a 
HDMI mini cable (optional) for automatic link ed operations. (Not all operations are possible.)
•VIERA Link is a unique Panasonic function built on a HDMI control function using the 
standard HDMI CEC (Consumer Electronics Control)  specification. Linked operations with 
HDMI CEC compatible devices made by other companies are not guaranteed. When using 
devices made by other companies that are compatible with VIERA Link, refer to the 
operating instructions for the respective devices.
•This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest Panasonic 
version and is also compatible with existing Panasonic VIERA Link devices. (As of 
December 2009)
Preparations: Set the [VIERA Link] to [ON]. (P34)
1[SUB MENU]
2 [OK]
3 [RETURN]
DMC-G10KPP-VQT2S62_eng.book  149 ページ  ２０１０年４月２３日　金曜日　午後８時０分 
						

							VQT2S62150
Connecting to other equipment
∫Usable functions
Operate with the remote control for the TV.
Note
•
Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while 
when the operation icons are displayed. Operation icons are displayed when one of the 
following buttons are pressed while the operation icons are not displayed.
–3/ 4/2/1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 
or more HDMI input terminals on the TV.
•When the [VIERA Link] (P34) of this unit is set to [ON], operation using the button on this unit 
will be limited.
•VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV 
for how to set etc.)
•If you are not using VIERA Link, set [VIERA Link] (P34) to [OFF].
Multi Playback This is displayed initially when using the VIERA Link.
3/ 4/2 /1 : Select the image.
[OK]: Go to one screen display.
Red button: Switch the types of data to play back.
[SUB MENU]:Display the Playback Mode selection screen.
•
The type of data for playback changes in the order of [ALL] > [] > [] > [ALL].•Either the [NORMAL PLAY], [SLIDE SHOW], [CATEGORY 
PLAY], [FAVORITE PLAY] or the [CALENDAR] can be selected 
in the Playback Mode selection screen when [ALL] is selected.
One screen display
Select the image while in Multi Playback, and then press [OK].
2/ 1: Go to previous/next image.
3: Display the recording information.
4: Return to Multi Playback.
[OK]: Playback the motion picture (when motion  picture is selected).
Playback the audio (when picture with audio 
is selected).
Red button: Start the Slide Show.
[SUB MENU]:Go to Slide Show setting screen.
•
During Motion Picture Playback, use  2/1  for back/forward and 
4 to stop playback.
Slide show Press Red button during one screen display.
2/ 1:Go to previous/next image (when Slide Show 
is paused/when motion picture is played back).
4: Finish the Slide Show and return to one 
screen display.
[OK]: Pause.
[SUB MENU]:Go to Slide Show setting screen.
•
To playback the audio of the motion pictures, set the [SOUND] in 
the Slide Show setting screen to [AUTO] or [AUDIO].
A Operation icon
A
A
DMC-G10KPP-VQT2S62_eng.book  150 ページ  ２０１０年４月２３日　金曜日　午後８時０分