Panasonic Dmp Bd50 Operating Instructions

							RQT9184-YPP
Operating Instructions
Blu-ray Disc Player
Model No. DMP-BD50
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
Region management information
BD-Video 
This unit plays BD-Video marked with labels containing the region code A.Example:
DVD- Video
This unit plays DVD-Video marked with labels containing the region number “1” or “ALL”.Example:
2
4 1ALL1
 For Canada only: The word “Participant” is used in place of the word 
“Partner”.
As an ENERGY STAR Partner,
Panasonic has determined that
this product meets the ENERGY STAR
guidelines for energy efficiency.®
®If you have any questions contact[[U.S.A.]:1-800-211-PANA(7262)
[Canada]:1-800-561-5505
[[U.S.A.]:
The warranty can be found on page37.[Canada]:The warranty can be found on page38.
La referencia rápida en español se puede encontrar en la página 39.
until 
2008/4/14
DMP-BD50PP-RQT9184_eng.book  1 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							2
RQT9184
(ENG)
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions 
listed below. Keep these operating instructions handy for future reference.
(Inside of product) 1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with 
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that 
produce heat.
9) Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with one 
wider than the other. A grounding-type plug has two blades and 
a third grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete 
outlet.10)Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.
11)Only use attachments/accessories specified by the 
manufacturer.
12)Use only with the car t, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the car t/apparatus combination to 
avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or 
when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is 
required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate 
normally, or has been dropped.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR 
PRODUCT DAMAGE, 
≥DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, 
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED 
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON 
THE APPARATUS.
≥USE ONLY THE RECOMMENDED ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO 
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, 
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. 
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK 
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE 
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN 
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or equivalent type recommended by the 
manufacturer. Dispose of used batteries according to the 
manufacturer’s instructions.
The socket outlet shall be installed near the equipment and easily 
accessible. The mains plug of the power supply cord shall remain 
readily operable.
To completely disconnect this apparatus from the AC Mains, 
disconnect the power supply cord plug from AC receptacle.
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk of 
electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for 
help.
Any unauthorized changes or modifications to this equipment 
would void the user’s authority to operate this device.
This device complies with Par t 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.
Responsible Par ty:
Panasonic Corporation of Nor th America
One Panasonic Way 
Secaucus, NJ 07094
Suppor t Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
DMP-BD50PP-RQT9184_eng.book  2 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							Getting started
3
RQT9184
(ENG)
Table of contents
IMPORTANT SAFETY INSTRUCTIONS............ 2
Accessory information ..................................... 3
Disc and card information ................................ 4
Using the remote control.................................. 5
Connection ........................................................ 6
Firmware updating ............................................ 9
Control reference guide.................................. 10
Easy Setting..................................................... 11
Setting the television and amplifier/receiver 
operation........................................................ 11
Network settings ............................................. 12
Basic play (Playing video contents) .............. 14
Enjoying BD-LIVE
TM or BONUSVIEW TM in 
BD-Video ........................................................ 16
Enjoying High Bit rate Audio and Video of 
BD-Video ........................................................ 17
Chapter playback ............................................ 18
Playing still pictures ....................................... 18
Playing DivX videos ........................................ 20
Playing music .................................................. 21
Showing FUNCTIONS menu........................... 21
About MP3/JPEG/DivX files............................ 22
Linked operations with the TV (VIERA Link
TM 
“HDAVI ControlTM”) ....................................... 23Changing settings with the on-screen 
menu ....................................................24
Changing the unit’s settings .......................... 26
Frequently asked questions........................... 30
Troubleshooting guide ................................... 30
Messages ......................................................... 34
Specifications .................................................. 36
Disc and card handling................................... 36
Maintenance .................................................... 36
To dispose or transfer this unit ..................... 36
Limited Warranty (ONLY FOR U.S.A. ) .......... 37
Limited Warranty (ONLY FOR CANADA) ...... 38
Product Service ............................................... 38
Glossary ........................................................... 40
Index ................................................................. 41
Accessory information
Getting started
Playback
Settings
Reference
Referencia rápida en español
(Spanish Quick Reference)............................. 39
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of April 2008. These may be subject to change.)
Only for U.S.A.: To order accessories, refer to “Accessory Purchases” on page 37.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase .
∏∏ ∏∏
1 Remote control
(N2QAYB000184)1 Audio/Video cable
(K2KA6BA00004)2 Batteries
for remote control1 AC power supply cord
(K2CB2CB00022)
≥For use with this unit only. Do not use 
it with other equipment.
Also, do not use cords from other 
equipment with this unit.
(ONLY FOR U.S.A. )
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/
The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.
DMP-BD50PP-RQT9184_eng.book  3 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							4
RQT9184
(ENG)
Disc and card information
This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on 
the discs and/or packaging.
This chart shows the different type of discs recorded with DVD recorders, DVD video cameras, personal computers, etc. that you can use.
 This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to 
the operating instructions for your equipment.
Packaged discs
Type of media/
LogoFeatures Indicated asType of media/
LogoFeatures Indicated as
BD-VideoHigh Definition (HD) 
movie and music discs 
≥Discs supporting 
BD-Live (BD-ROM 
version 2 Profile 2) that 
allows interactive 
functions to be used 
when this unit is 
connected to the 
Internet in addition to 
the BONUSVIEW 
function.
≥Discs supporting 
BONUSVIEW 
(BD-ROM version 2 
Profile 1 version 1.1/ 
Final Standard Profile) 
that allows Virtual 
packages or 
Picture-in-Picture 
functions to be used.[BD-V]DVD-VideoHigh quality movie and 
music discs [DVD-V]
CDCompact Discs (CD’s) 
that contain audio and 
music
≥Operation and sound 
quality of CDs that do 
not conform to CD-DA 
specifications (copy 
control CDs, etc.) 
cannot be guaranteed.[CD]
Recorded discs
Finalized
Type of media/
LogoFormats Indicated asType of media/
LogoFormats Indicated as
BD-RE≥Version 3 of the BD-RE 
Recording Format
≥JPEG format[BD-V]
[JPEG]DV D-R DL  ≥DVD-Video Format
≥Version 1.2 of the DVD 
Video Recording 
Format
≥AVCHD format
≥DivX format[DVD-V]
[DVD-VR]
[AVCHD]
[DivX]
BD-R≥Version 2 of the BD-R 
Recording Format[BD-V]
rR/rRW /
rRDL ≥+VR (+R/+RW Video 
Recording) Format
≥AVCHD format[DVD-V]
[AVCHD]
DVD-RAM≥Version 1.1 of the DVD 
Video Recording 
Format
≥JPEG format
≥AVCHD format[DVD-VR]
[JPEG]
[AVCHD]
CD-R/RW ≥CD-DA format
≥MP3 format
≥JPEG format
≥DivX format[CD]
[MP3]
[JPEG]
[DivX]
DVD-R/RW ≥DVD-Video Format
≥Version 1.1 of the DVD 
Video Recording 
Format
≥AVCHD format
≥DivX format (DVD-RW 
is not supported)[DVD-V]
[DVD-VR]
[AVCHD]
[DivX]≥It may not be possible to play the above discs in some cases 
due to the type of discs, the condition of the recording, the 
recording method and how the files were created.
≥When a disc recorded in the AVCHD format is being played, the 
video may be paused for a few seconds at portions spliced, due 
to deletion or editing.
Finalized
Finalized
Finalized
Finalized
DMP-BD50PP-RQT9184_eng.book  4 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							5
RQT9184
(ENG)
This chart shows the different type of cards recorded with Panasonic High Definition Video Camera or personal computers, etc. that you can use.
§Including miniSD Card and microSD Card
≥When using from 4 GB to 32 GB SD cards, only SD cards that 
display the SDHC logo can be used.
≥This unit is compatible with SD Memory Cards that meet SD Card 
Specifications FAT12 and FAT16 formats, as well as SDHC 
Memory Cards in FAT32 format.
≥In these operating instructions, the cards shown in the table 
(Dabove) are comprehensively called SD cards.≥A miniSD Card and a microSD Card must be used with 
the attached adaptor that comes with the card.
≥Useable memory is slightly less than the card capacity.
≥If the SD card is formatted on a PC, you may not be able 
to use it on this unit.
≥We recommend using a Panasonic SD card.
≥Keep the Memory Card out of reach of children to 
prevent swallowing.
≥When a card recorded in the AVCHD format is being played, the 
video may be paused for a few seconds at portions spliced, due to 
deletion or edition.
≥Switch the write-protect switch to the “LOCK” position to protect 
the content from accidental erasure.
Using the remote control
BatteriesInsert so the poles (i and j) match those in the remote control.
When closing the lid, insert it from the j (minus) side.
≥Do not use rechargeable type batteries.
≥Do not mix old and new batteries.
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct 
sunlight for a long period of time with doors and windows closed.
≥Do not take apar t or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can 
damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
Use
If you cannot operate the unit or other equipment using the remote 
control after changing the batteries, please re-enter the codes 
(>11, 33).
SD cards
Type of mediaFormats Indicated as
SD Memory Card§
(from 8 MB to 2 GB)SDHC Memory Card(from 4 GB to 32 GB)≥JPEG format
≥AVCHD format[JPEG]
[AVCHD]
ADAPTER
Regarding BD-Video
≥Please enjoy BD-Live functions (>16), such as the network connection. The various functions differ depending on the disc.
≥Regarding high bit rate audio of BD-Video such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD 
Master Audio (>17)
This unit can output the high bit rate audio adopted in BD-Video to your amplifier/receiver in bitstream format. In addition, even if your amplifier/
receiver cannot decode the high bit rate audio, you can enjoy BD-Video’s high-quality audio by decoding the high bit rate audio with this unit.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play 
may not be possible.
Discs that cannot be played
≥BD-RE with the cartridge 
≥2.6 GB and 5.2 GB DVD-RAM
≥3.95 GB and 4.7 GB DVD-R for Authoring
≥DVD-RAM that cannot be removed from their cartridges
≥Version 1.0 of DVD-RW
≥+R 8 cm (3z), DVD-ROM, CD-ROM, CDV, SACD, Photo CD, 
MV-Disc and PD≥DV D - Aud io
≥Video CD and SVCD
≥WMA discs
≥PAL discs
≥HD DVD
≥BD-Video discs recorded at a rate of 50 field per second
≥Other discs that are not specifically supported 
R6/LR6, AA
 
20
3020
30
Remote control signal sensor
7 m (23 feet) directly in front 
of the unit
Getting started
DMP-BD50PP-RQT9184_eng.book  5 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							6
RQT9184
(ENG)
Connection
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s 
HDMI cable.
Recommended part number: 
RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20 (2.0 m/6.6 ft), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), 
etc.
≥When outputting 1080p signal, please use HDMI cables 5.0 meters or less.
Connecting to a television
AConnecting to HDMI AV OUT terminal
You can enjoy high quality, digital video and audio. 
NOTE
TIPS
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI 
Audio Output” : “On” (>28)
To enjoy a richer sound
≥Use connections E, F or G 
(>7, 8) additionally.
In case of the connection F or G, 
set “HDMI Audio Output” to “Off” 
(>28)
With this connection, you can use 
VIERA Link “HDAVI Control” 
(>23).
BConnecting to COMPONENT VIDEO OUT terminal
You can enjoy high definition images by connecting to a component video terminals that supports 720p (750p) and 1080i (1125i) signals. 
NOTE
TIPS
≥Connect terminals of the same 
color.
≥Unplug the yellow plug of Audio/
Video cable.
≥Set “Black Level Control” to 
“Darker”. (>26)
≥The video output resolution is 
restricted to “480p” when 
DVD-Video is output from the 
COMPONENT VIDEO OUT 
terminals.
To enjoy high definition/
progressive video
≥Connect to a television that 
supports 480p or higher.
≥Set “Component Video Resolution” 
to “480p”, “720p” or “1080i”. (>28)
≥Set “HDMI Video Mode” to “Off”. 
(>28)
Otherwise, the video is output as 
480i.
AV OUTFRONT R  /RVIDEO OUT S VIDEO OUTOPTICAL
COAXIALFRONT L  /L
SUBWOOFER CENTER SURROUND AUDIO OUTCOMPONENT VIDEO OUT
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch YP
B
PR
L
RL
R
LAN
10BASE-T/
100BASE-TX
Please 
connect
directly 
to TV.
HDMI IN
HDMI AV OUTHDMI 
compatible
television HDMI cable
Back of the unit
COMPONENT 
VIDEO IN AUDIO IN 
R           L 
FRONT R  /R VIDEO OUT S VIDEO OUTOPTICAL COAXIAL 
FRONT L  /L 
SUBWOOFER  CENTER  SURROUND  AUDIO OUTCOMPONENT VIDEO OUT 
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch  Y P
B 
PR 
L 
R L 
R 
Please  
connect 
directly  
to TV. Back of the unitAudio/Video cable 
(included) Component 
Video cableTelevision
DMP-BD50PP-RQT9184_eng.book  6 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							7
RQT9184
(ENG)
CConnecting to S VIDEO OUT terminal
The S VIDEO OUT terminal provides a more vivid picture than the VIDEO OUT terminal.
NOTE
≥High definition video cannot be 
output with this connection.
Use connection A or B (>6) for 
high definition video.
≥Unplug the yellow plug of Audio/
Video cable.
≥Actual video quality depends on 
the television.
DConnecting to VIDEO OUT terminal
NOTE
TIPS
≥Connect terminals of the same 
color.
≥High definition video cannot be 
output with this connection.
Use connection A or B (>6) for 
high definition video.
§With audio cables, connect the 
AUDIO OUT terminals to the 
two-channel audio input terminals 
of an analog amplifier/receiver or 
system component in place of a 
television to enjoy stereo sound.
To improve picture quality
≥Use connections B (>6) or C.
To enjoy a richer sound
≥Use connections F or G (>8).
(Unplug the red and white plugs.)
FRONT R  /R VIDEO OUT S VIDEO OUTOPTICAL COAXIAL 
FRONT L  /L 
SUBWOOFER  CENTER  SURROUND  AUDIO OUTCOMPONENT VIDEO OUT 
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch  Y P
B 
PR 
L 
R L 
R 
Please  
connect 
directly  
to TV. 
AUDIO IN 
R           L S VIDEO IN 
Back of the unitAudio/Video 
cable (included)
S Video cableTelevision
AUDIO IN
R         LVIDEO IN
FRONT R  /RVIDEO OUT S VIDEO OUTOPTICALCOAXIAL
FRONT L  /L
SUBWOOFER CENTER SURROUND AUDIO OUTCOMPONENT VIDEO OUT
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch5.1ch YP
B
PR
L
RL
R
Please 
connect
directly 
to TV.
AUDIO/VIDEO IN
2ch AUDIO OUT
§
Television
Audio/Video cable
(included)
VIDEO OUT Back of the unit
Connecting an amplifier/receiver
EConnecting to HDMI AV OUT terminal
When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or DTS-HD.
NOTE
TIPS
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI 
Audio Output” : “On” (>28)
≥“Speaker” : “Multi Channel” (>28)
≥“Digital Audio Output” : Depending 
on the connected amplifier/receiver 
(>27)
With this connection, you can use 
VIERA Link “HDAVI Control” 
(>23).
AC INAV OUT
LAN
10BASE-T/
100BASE-TX
HDMI INMulti channel speakers
HDMI cable  HDMI compatible 
amplifier/receiver Back of the unitHDMI 
compatible
television
HDMI IN HDMI OUT
Getting started
DMP-BD50PP-RQT9184_eng.book  7 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							8
RQT9184
(ENG)
FConnecting to 5.1ch AUDIO OUT terminal
When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.
NOTE
NECESSARY SETTINGS
≥“Speaker” : “Multi Channel” (>28)
≥7.1 channel disc is mixed down to 
5.1 channel audio.
When connected to HDMI 
compatible television (>6, A) or 
other device.
≥“HDMI Audio Output” : “Off” (>28)
(Otherwise, the sound is output 
from the television and when the 
original audio comes in six channels 
or more, the audio is output as two 
channels only.)
≥Depending on how the disc was 
recorded, the audio may not be 
output properly on the number of 
channels desired.
Cable connections
aFront speaker (L/R)
bSurround speaker (L/R)
cCenter speaker
dSubwoofer
GConnecting to DIGITAL AUDIO OUT terminal
You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL or OPTICAL terminal.
With COAXIAL
NOTE
NECESSARY SETTINGS
≥“Digital Audio Output” : Depending 
on the connected amplifier/receiver 
(>27)
When connected to an HDMI 
compatible television (>6, A)
≥“HDMI Audio Output” : “Off” (>28) 
(Otherwise, the sound may not be 
output with the desired settings.)
With OPTICAL
FRONT R  /R FRONT L  /L
SUBWOOFER CENTER SURROUND
 AUDIO OUTO OUT
2ch5.1ch P
B
PR
L
RL
R




Connect Au dio  
cables to 
terminals 
corresponding to 
the speakers you 
have connected.
Back of the unit
Amplifier/receiver with 
5.1ch AUDIO IN Multi channel speakers
FRONT R  /R VIDEO OUT S VIDEO OUTOPTICAL COAXIAL 
FRONT L  /L 
SUBWOOFER  CENTER  SURROUND  AUDIO OUTCOMPONENT VIDEO OUT
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch  Y P
B 
PR 
L 
R L 
R 
COAXIAL IN 
Please  
connect 
directly  
to TV. 
Back of the unitCoaxial cable
Amplifier/receiver with a 
built-in decoder or a 
decoder-amplifier/
receiver combination
FRONT R  /R VIDEO OUT S VIDEO OUTOPTICAL COAXIAL 
FRONT L  /L 
SUBWOOFER  CENTER  SURROUND  AUDIO OUTCOMPONENT VIDEO OUT 
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch  Y P
B 
PR 
L 
R L 
R 
OPTICAL IN 
Please  
connect 
directly  
to TV. 
Back of the unitOptical digital 
audio cable
Amplifier/receiver with a 
built-in decoder or a 
decoder-amplifier/
receiver combination
Connecting AC power supply cord
NOTE
TIPS
Connect only after all other 
connections are complete. 
Conserving power
This unit consumes a small amount of 
power even when it is turned off (less 
than 1 W). To save power when the 
unit is not to be used for a long time, 
unplug it from the household AC outlet.
AC INAV OUTFRONT R  /RVIDEO OUT S VIDEO OUTOPTICALCOAXIAL
FRONT L  /L
SUBWOOFER CENTER SURROUND AUDIO OUTCOMPONENT VIDEO OUT
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch YP
B
PR
L
RL
RLAN
10BASE-T/
100BASE-TXPlease 
connect
directly 
to TV.
Back of the unit
AC power supply cord 
(included)
To a household AC outlet
(AC 120 V, 60 Hz) Cooling fan
DMP-BD50PP-RQT9184_eng.book  8 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							9
RQT9184
(ENG)
Firmware updating
Network connection
HWith LAN
By connecting the unit to broadband Internet, you can use a disc that offers BD-Live 
function. (>16)
This connection also allows you to automatically check for the latest firmware version. 
(Bbelow)
NOTE
≥After connecting to the Internet, perform 
necessary settings. (>12)
≥Inserting any cable other than a LAN cable 
in the LAN terminal can damage the unit.
AC IN AV OUTFRONT R  /R VIDEO OUT S VIDEO OUTOPTICAL COAXIAL 
FRONT L  /L 
SUBWOOFER  CENTER  SURROUND  AUDIO OUTCOMPONENT VIDEO OUT 
DIGITAL AUDIO
OUT
(
PCM/BITSTREAM)
2ch 5.1ch  Y P
B 
PR 
L 
R L 
R 
Please  
connect 
directly  
to TV. LAN
10BASE-T/ 
100BASE-TX 
≥When your communication equipment (modem), etc. has no 
broadband router functions: Connect a broadband router.
When your communication equipment (modem), etc. has broadband 
router functions but there are no vacant ports: Connect a hub.
≥Use a router that suppor ts 10BASE-T/100BASE-TX. Telecommunications 
equipment (modem, etc.)Straight LAN cable (not included)
Hub or broadband router Back of the unit Internet
When this unit remains connected to the Internet, it will automatically check for the 
latest firmware version when it is turned on.
When latest firmware version is available, the following screen is displayed.
Select “Yes” or “No”.
≥If “Yes” is selected, then follow the on-screen instructions.
≥If “No” is selected, then manually update the firmware later. (Bright)
After the latest firmware is downloaded, the system will be restar ted and the firmware 
will be updated.
When the system is restarted, the screen display disappears 
and “START” is displayed on the unit’s display.
After the firmware is updated and the system is restarted, the following screen 
indicates that the firmware update has been completed.
≥During the update process, no other operations can be performed. Serious damage 
may occur if you turn the power off and/or press any buttons.
NOTE
TIPS
≥Downloading will require several minutes. It 
may take longer or the Internet may not be 
connected depending on the connection 
environment. It is required that you use a 
broadband connection.
≥If downloading on this unit fails or this unit is 
not connected to the Internet, then you can 
download the latest firmware from the 
following website and burn it to a CD-R to 
update the firmware.
http://panasonic.net/support/
≥When the unit is connected to the Internet, 
communication charges may be generated.
≥If you do not want to check for the latest 
firmware version when the unit is turned on, 
set “Automatic Update” to “Off”. (>29)
Manually updating the firmware
If the firmware update is not carried out when 
the unit is turned on, a message is displayed 
when displaying the FUNCTIONS menu.
You can manually update the firmware.
1) Press [SETUP].
2) Press [3,4] to select “Others” and press 
[OK].
3) Press [3,4] to select “Firmware Update” 
and press [OK].
4) Press [3,4] to select “Update Now” and 
press [OK].
5) Press [2,1] to select “Yes” and press 
[OK].
Firmware Update
New firmware is available.
  Current Installed Version: x.x  Latest Online Version: x.x
Do you want to start firmware update?
Ye sNo
Firmware Update
The firmware was updated.
Current version: x.x
New firmware version available.
Please update from Setup.
Getting started
DMP-BD50PP-RQT9184_eng.book  9 ページ  ２００８年４月４日　金曜日　午後８時１４分 
						

							10
RQT9184
(ENG)
Control reference guide
!Turn the unit on and off (>11)
@TV operation buttons (>11)
You can operate the TV through the unit’s remote control.
[ÍTV POWER] : Turn the television on and off
[TV/VIDEO] : Switch the input channel
[WXCH] : Channel select
[ijVOL] : Adjust the volume
#Open or close the disc tray (>14)
$Numbered buttons
Select title numbers, etc./Enter numbers (>15)
%Cancel
^Basic playback control buttons (>14, 15)
&Show status messages (>15)
*Show Pop-up menu (>14)
(Show Top menu/Direct Navigator (>14)
AJShow sub menu (>18)
AAThese buttons are used when operating a BD-Video disc that 
includes Java
TM applications (BD-J). For more information about 
operating this kind of disc, please read the instructions that came 
with the disc.
The [A] and [B] buttons are also used with the “Title View”, “Picture 
View” and “Album View” screens (>18).
ABShow Setup menu (>26)
ACSwitch on/off Secondary Video (Picture-in-picture) (>16)
ADTransmit the remote control signal
AEReceiver operation buttons (>11)
You can operate an amplifier/receiver through the unit’s remote 
control.
[ijVOL] : Adjust the volume
[MUTING] : Mute the sound
AFReproduce more natural audio (>15)
AGSelect audio (>15)
AHShow FUNCTIONS menu (>21)
AISelection/OK, Frame-by-frame (>15)
BJShow on-screen menu (>24)
BAReturn to previous screen
BBSelect disc drive or SD card drive (>14)
BCSwitch on/off Secondary Audio (>16)
CAUTION
Do not place objects in front of the unit. The disc tray may collide 
with objects when it is opened, and this may cause injury.
1POWER button (POWER Í/I) (>11)
Press to switch the unit from on to standby mode or vice versa. In 
standby mode, the unit is still consuming a small amount of power.
2Disc tray (>14)
3SD Card LED
≥It is possible to set the LED to turn on/off. (>27, SD Card LED 
Control)
4SD card slot (>18)
5Display
The indicator blinks when reading data from a disc or card, or 
writing data to a card.6Search/Slow-motion/Skip (>15)
Search: Press and hold (During play)
Slow-motion: Press and hold (During pause)
Skip: Press
7Open or close the disc tray (>14)
8
Remote control signal sensor (>5)
9Stop (>15)
:Pause (>15)
;Start play (>14)
Rear panel terminals (>6–9)
VOL
RE-MASTER
SKIPSLOW/SEARCH
STATUSFUNCTIONS
ABCD
RETURNSUB MENU
 AUDIOMUTING
POP-UP MENU 
PLAYPA U S ESTOP
S
CANCEL
PIPSECONDARY AU DIO
BD/SDSETUP
DIRECT NAVIGATOR  
OK
RECEIVER
CHVOL
POWERPOWER
TV/VIDEOOPEN/CLOSE
      TOP MENU DISPLAY 



 
 	



















 




PULL-OPEN
SD CARD

 	 
  
Pull to flip down the 
front panel.
Disc indicator SD card indicator
DMP-BD50PP-RQT9184_eng.book  10 ページ  ２００８年４月４日　金曜日　午後８時１４分