Panasonic Dmp Mst60 Owners Manual

							- 11 -
Connections & Settings
∫“Search for wireless network”
The available wireless networks will be displayed.
1 Select your network name and press [OK].
≥If your network name is not displayed, 
search again by pressing the red button on 
the remote control. Stealth SSID will not be 
displayed; in this case, enter manually.
When your wireless network is encrypted
2 Press [OK] to select “Encryption Key”. 3
Enter your encryption key (password).
≥You can switch between capital and lower 
case letters by pressing the “Shift” key.
To enter your network name (SSID) manually
If your network name (SSI D) is not displayed in 
step  1, follow these steps.
1 To display the network name (SSID) input  screen :
While displaying the HOME menu, press the 
[SETTINGS] button on the remote control
> select “Network” and press [OK] 
>  select “Network Settings” and press [OK] 
>  select “Wireless Settings” and press [OK] 
>  select “Connection Setting” and press [OK]
>  select “Manual setting” and press [OK]
2 Press [OK] to select “SSID” and enter your  SSID.
≥If your wireless network is encrypted, go to step 2.
To obtain your network name (SSID*) and 
encryption key (password).
The default settings may be printed on the 
router. If the SSID and password have been 
changed, consult the person responsible for 
setting up your network.
For more details, refer to the manual supplied 
with the wireless broadband router, or contact 
your Internet provider.
For more information or assistance, refer to
http://www.panasonic.com/help
(U.S. customers only)
e.g.
SSID XXXXXXXXXXXX
KEY  XXXXXXXXXXXX
PIN   XXXXXXXXX
Search again
Connection Setting
Reception
Select a wireless network for connection.
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
OKRETURN
OPTION
Wireless Settings
Encryption Key
Set
Enter the encryption key (password) of the wireless network.
M
369#G
2580†
147*;
gnu@,
fmt.-
elsz_
dkry~
cjqx:
bipw/
ahovSpaceSymbols
Encryption Key (Password) 
Shift
Finish
AlphanumericOther Characters
a
OKRETURN
Delete
Enter your network name (SSID) to connect.Wireless Settings
SSID
Set 
						

							- 12 -
Connections & Settings
	≥Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates 
settings relating to the connection and security of wireless 
LAN devices. To see whether your wireless router supports 
WPS, check the wireless router operating instructions.
≥ You can perform this setup anytime by selecting “Easy 
Network Setting” in the Setup menu. ( >25)
≥ You can redo these settings individually using “Network 
Settings”. (> 25)
≥ Do not use this unit to connect to any wireless network for 
which you do not have usage rights.
During automatic searches in a wireless network 
environment, wireless networks (SSID) for which you do 
not have usage rights may be displayed; however, using 
these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings 
(encryption level, etc.) of the wireless router might change. 
When you have trouble getting online on your PC, perform 
the network settings on your PC in accordance with the 
settings of wireless router.
≥ Please be aware that connecting to a network without 
encryption may result in the content of the communication 
being illegitimately viewed by a third party, or the leaking of 
data such as personal or secret information.
* SSID An SSID (Service Set IDentification) is a name used by 
wireless LAN to identify a particular network. 
Transmission is possible if the SSID matches for both 
devices.
If you have more than one Panasonic player/
recorder and the remote control operates both 
products at once, you will need to change the 
remote control code to prevent this occurrence. 
(> 27, “Remote Control Code”) Occasionally, Panasonic may release updated 
firmware for this unit that may add or improve the 
way a feature operates. These updates are 
available free of charge.
This unit is capable of checking the firmware 
automatically when connected to the Internet via 
a broadband connection.
When a new firmware version is available, the 
following message is displayed.
To update the firmware
Press [HOME]
>
 press the [SETTINGS] button on the remote 
control
>  select “System” and press [OK]
>  select “Firmware Update” and press [OK]
>  select “Update Now” and press [OK]
DO NOT DISCONNECT the unit from the AC 
power or perform any operation while the update 
takes place.
After the firmware is installed, INFO LED and 
POWER LED flash for 3 times ( >6), and “FIN” 
will be displayed on the screen. Unit will restart 
and the following screen will be displayed.
	≥ To show the firmware version on this unit. 
(> 27, “Firmware Version Information”)
≥ Downloading will require several minutes. It may take 
longer or may not work properly depending on the 
connection environment.
≥ If you do not want to check for the latest firmware version, 
set “Automatic Update Check” to “Off”. ( >27)
Reprogramming the remote 
control
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.
Current Version: x.xx
RETURN 
						

							- 13 -
Playback
Playba ckHOME menu
Major functions of this unit can be operated from 
the HOME menu.
Preparation
Turn on the TV and select the appropriate video 
input on the TV.
1Press [Í] to turn on the unit.
≥ After network service introduction banner is 
shown, the HOME menu is displayed.
– When connected to the network, the 
banner content may be changed.
– You can disable the “Start-up Banner”  (> 27).
2Press [OK] or [ 3,4 ,2 ,1] to select the 
item.
≥If there are any other items, repeat this step.
Miracast
Starting Miracast. (> 15)
Home Network
USB Contents
Network Service
Displays the Home screen of Network Service. 
(> 14) Setup
To show the HOME
 menu
Press [HOME].
	≥ Items to be displayed may vary with the contents.
DLNA Client(> 16)
Media 
Renderer
(> 17)
Videos
Play back the contents. ( >18)
≥ When multiple contents are 
recorded, select the types of 
contents or the title.
Photos
Music
Player 
Settings(>
24)
[MST60]
Owner’s 
Manual
You can browse the Owner’s 
Manual for this unit on the 
Internet.
Wallpaper
Changes the background of 
HOME menu. 
						

							- 14 -
Playback
Network Ser vice 
(Enjoying Netflix, etc.)
Network Service allows you to access some 
specific websites supported by Panasonic, and 
enjoy Internet contents such as photos, videos, 
etc. from Network Service Home screen.
≥Some services such as Netflix require a 
registered account.
For details of your Netflix account, refer to 
Netflix.
[MS10]  The unit has selected network content and 
some features of websites may not be available.
Network Service provides a variety of selected 
Internet services such as the following.
≥ Online movie rental service
≥ Video browsing service
A Internet
* Images are for illustration purposes, contents may change 
without notice.
Preparation
≥Network connection ( >8)
≥ Network setting (> 10)
1Press [INTERNET].
≥Netflix can be accessed directly by pressing 
[NETFLIX] button.
2Select the item and press [OK].
To exit from Network Service
Press [HOME].
	≥ When playing content in the media, Network Service 
cannot be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the 
Setup menu items.
– When restricting the use of Network Service 
(> 26, “Network Service Lock”)
– When correcting the displayed time ( >26, “Time Zone”, 
“DST”)
≥ If using slow Internet connection, the video may not be 
displayed correctly. A high speed Internet service with a 
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update 
notice is displayed on the screen. If the firmware is not 
updated, you may not be able to use Network Service 
function properly. ( >12)
≥ Network Service Home screen is subject to change without 
notice.
≥ The services through Network Service are operated by 
their respective service providers, and service may be 
discontinued either temporarily or permanently without 
notice. Therefore, Panasonic will make no warranty for the 
content or the continuity of the services.
≥ Some features of websites or content of the service may 
not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries 
and may be presented in specific languages.
*
 
						

							- 15 -
Playback
Using Miracast™
You can enjoy the content you are viewing on a 
Miracast-compatible smartphone, etc. on the big 
screen of your TV.
≥Compatible with Android™ devices, ver. 4.2 
and above and Miracast certified.
For information on whether the smartphone, 
etc. supports Miracast, contact the 
manufacturer of the device.
A Player
B Miracast compatible device
1Press [MIRACAST].
2Operate the Miracast compatible device.
≥On the device, enable Miracast and select 
this unit (DMP-MST60 or DMP-MS10) as 
the device to be connected.
For details, refer to the instructions supplied 
with the device.
To exit from Miracast
Press [HOME].
	≥ Depending on the device or connection environment, the 
data transfer rate may decrease.
 
						

							- 16 -
Playback
Home Network feature
You can share photos, videos and music stored in 
the DLNA Certified media server (PC with 
Windows 7 installed, smartphone, etc.) connected 
to your home network, and enjoy the contents 
with this player.
≥About support format of DLNA. ( >33)
≥ Before using the DLNA feature, be sure to 
configure the DLNA server on your Home 
Network.
A Player
B Server
Preparation
1 Perform network connection (> 8) and 
network settings ( >10) of this unit. 
2 Perform Home Network settings of the 
connected equipment.
3 Add the contents and folder to the libraries of 
the Windows Media
® Player or the 
smartphone, etc.
≥ Playlist of Windows Media
® Player can play 
back only the contents that are stored in the 
libraries.
1Press [HOME].
2Select “Home Network”.
3Select “DLNA Client”.
≥ The list can be updated by pressing the red 
button on the remote control.
≥ The connection method can be switched to 
Wi-Fi Direct by pressing the green button 
on the remote control.
4Select the equipment and press [OK].
5Select the item to play and press [OK].
≥You may be able to use convenient 
functions depending on the content by 
pressing [OPTION].
≥ Control Panel is displayed once the 
playback starts. Press [OK] if the Control 
Panel is not displayed, and press 
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [HOME].
Playing back contents on 
the DLNA ser ver

EXIT 
						

							- 17 -
Playback
You can use a smartphone or tablet as the Digital 
Media Controller (DMC) to play back contents 
from DLNA server on the Renderer (this unit).
Possible applications:
ARenderer
B Server
C Controller
D Server + Controller
* DMC compatible software should be installed.
Preparation
Perform steps 1  to 3. ( >16)
4Perform the “Remote Device Settings”. (>26)≥You can register up to 16 devices.
1Press [HOME].
2Select “Home Network”.
3Select “Media Renderer”.
4Select “Home Network” or “Wi-Fi Direct”, 
then follow the indications on the screen.
5Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
	
≥ Wi-Fi Direct connection while using Home Network feature 
is only temporary, and the network connection method 
returns to the original setting when exiting.
≥ Depending on the contents and the connected equipment, 
playback may not be possible.
≥ Items displayed in gray on the display cannot be played 
back by this unit.
≥ This unit can be played back via connected equipment only 
when controlled using DMC.
Using the Digital Media 
Controller
*
**




For more details, refer to the following website 
and the operating instructions for each of the 
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.) 
						

							- 18 -
Playback
Playing back USB 
devices
1Insert the USB device.
≥When inserting a media item, ensure that it 
is facing the right way.
≥ If you connect a Panasonic product with a 
USB connection cable, the setup screen 
may be displayed on the connected 
equipment. For details, refer to the 
instructions for the connected equipment.
2Select the item to play and press [OK].
Repeat this procedure if necessary.
≥ USB devices of up to 2 TB can be used.
≥ This unit does not guarantee connection with all 
USB devices.
≥This unit does not support USB device charging.≥FAT12, FAT16, FAT32, and NTFS file systems 
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32 
and NTFS. If the HDD is not recognized, the 
power to the HDD may not be supplied. Supply 
power from an external source. Play a slideshow of photos and adjust various 
settings during the playback.
Select an item and press the green button.
The following items can be set.
	≥
It may not be possible to play the contents in some cases 
due to the type of media, the condition of the recording, the 
recording method, and how the files were created.
≥ MKV: Successive play is not possible.
≥ It is not possible to play back MPEG2 videos which have 
been dragged and dropped or copied and pasted to the 
USB device.
≥ To save on electricity, this unit is turned off automatically if 
there is no button operation for about 30 minutes  when not 
playing back (such as when paused, displaying the menu, 
displaying still pictures, etc.). (Compatible with ENERGY 
STAR)
≥ Still pictures displayed as “ ” cannot be played back 
with this unit.
USB device
Contents formatMKV, MP4, MPEG2, JPEG, 
AAC, FLAC, MP3, WAV, 
WMA,  [MST60]  MPO
Slideshow
Start 
SlideshowStart the slideshow.
You can display still pictures in 
the selected folder one by one at 
a constant interval.
Display 
IntervalChange the display interval.
Transition 
EffectSelect the effect when sliding 
pictures.
Repeat PlaySet whether to repeat the 
slideshow. 
						

							- 19 -
Playback
Operations during 
playback
The following functions may not work depending 
on the content.
Press [∫STOP].
Press [ ;PA U S E ] .
≥Press [;PAUSE] again or [1PLAY] to restart play.
While playing, press [SEARCH 6] or 
[SEARCH 5].
The speed increases up to 5 steps.
≥ MP3, etc.: The speed is fixed to a single step.
≥ Press 
[1PLAY] to revert to normal playback 
speed.
While playing or paused, press [:] or [9].Skip to the track, etc.
Press [AUDIO].
You can change the audio channel number, etc. Press [TOP MENU].
≥
Select the item and press [OK].
While playing, press [STATUS].
The status messages give you information about 
what is currently being played. Each time you 
press [STATUS], the display information may 
change or will disappear from the screen.
≥ Depending on contents, the display may 
change or may not appear.
e.g., MP4
A Elapsed time in the title
B Current position
C To t a l  t i m e
e.g., JPEG
Stop
Pause
Search
Skip
Changing audio
Displaying menus and 
playback infor mation
Show top menu
Show the status messages
PlayUSB(Video)0:05.140:20.52
BC
A
Date                        11/12/2007 
Size                         500 x 375
Manufacturer
Equipment 1 / 26 
						

							- 20 -
Playback
Enjoying 3D
[MST60]
By connecting a 3D compatible TV to this unit with 
a High Speed HDMI cable, you can enjoy Network 
Service 3D content and 3D photos in USB 
devices.
Preparation
Connect this unit to a 3D compatible TV. (>7)
≥ Perform the necessary preparations for the TV.
≥ Play back following the instructions displayed 
on the screen.
≥ 3D Settings ( >23, 25)
	≥Please refrain from viewing 3D images if you do not feel 
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or 
other discomfort while viewing 3D images, discontinue use 
and rest your eyes.
≥ 3D images might not output the way it is set in “HDMI 
Resolution”. ( >24)
≥ When playing back 3D photos from “Photos” screen, select 
from the “3D” list. (Still pictures in “2D” are played back in 
2D.)
If “2D” and “3D” indications are not displayed, press the 
red button to switch the view of playback contents.
“HDMI CEC” 
This unit supports “HDMI CEC” (Consumer 
Electronics Control) function.
See the operating instructions for connected 
equipment for operational details.
Preparation
1 Set “HDMI CEC” to “On” ( >27). (The default 
setting is “On”.)
2 Set the “HDMI CEC” operations on the 
connected equipment (e.g., TV).
3 Turn on all “HDMI CEC” compatible 
equipment and select this unit’s input channel 
on the connected TV so that the “HDMI CEC” 
function works properly.
Repeat this procedure when the 
connections or settings are changed.
When you press [HOME], etc. on the remote 
control, the TV will automatically switch the input 
channel and the screen of this unit will be 
displayed.
When the TV is off, the TV will automatically turn 
on.
All connected equipment compatible with “HDMI 
CEC”, including this unit, automatically turns off 
when you switch the TV off.
	≥Operation cannot be guaranteed on all HDMI CEC devices.
Automatic input switching
Power on link
Power of f link