Panasonic Document Scanner Kv S1015c Operating Manual

These instructions contain information on operating the scanner. Before reading these instructions, please read 
the Safety Guide and the Quick Reference Guide enclosed with this unit.
Please carefully read these instructions and the enclosed Safety Guide a\
nd Quick Reference Guide.
Keep all documentation in a safe place for future reference.Model No.   
KV-S1026C
KV-S1015C
Operating Manual
Document Scanner  

Introduction
Thank you for purchasing a Panasonic Document Scanner.
About the documentation The 
scanner documentation consists of 3 manuals: the Operating Manual (this manual), the Safety Guide and
the Quick Reference Guide.
Operating Manual(this manual) This manual provides all information required to use the scanner.
Safety Guide The Safety Guide explains safety precautions and other important information.
Quick Reference Guide The Quick Reference Guide explains the installation of the unit and...

System Requirements
Computer IBM®
 PC/AT or compatible machine with a DVD -ROM drive
CPU Intel®
 Core™2 Duo 1.8 GHz or higher
Interface USB 2.0Note
•For 

details about the system requirements, refer to [Read me first] in the Software / Manual DVD-ROM.
• The above system requirements may not satisfy the requirements of all operating systems.
• The scanning speed differs depending on the host computer’s operating environment or the application
used.
• Due to the slower speed of USB 1.1, it is recommended...

Trademarks
•Microsoft, 
Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• ISIS is a registered trademark or trademark of EMC Corporation in the United States and other countries.
• IBM is a trademark of International Business Machines Corporation in the United States, other countries,
or both.
• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries.
• Adobe...

Federal Communications Commission Requirements (For United States
only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio...

Table of Contents
Before You Start ....................................................................................... 8
For Your Safety .. ............................................................................................................... 8
Safety Information (For United Kingdom only) .. ..........................................................11
Precautions ...................................................................................................................... 11...

Index..............................................................................................................
63Operating Manual 7 Table of Contents 

For Your Safety
To prevent severe injury and loss of life, read this
section 
carefully before using the unit to ensure proper
and safe operation of your unit.
• This section explains the graphic symbols used
in this manual. Denotes a potential
hazard that could
result in serious
injury or death.
Denotes hazards
that could result in
minor injury or
damage to the unit.
These symbols are used to
alert operators to a specific
operating procedure that
must not be performed.
These symbols are used to
alert...

Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if 
left unattended over an extended period
of time. Never touch the plug or AC adaptor with
wet hands.
Danger of electric shock exists.
Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell, 

or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit...

Power
The unit should be used only with the
power 
cord and AC adaptor enclosed with
the unit. When the unit is not used over an
extended period of time, turn the unit off,
and unplug the power cord. If an unused
unit 

is left connected to a power source for
a long period, degraded insulation may
cause electric shock, current leakage, or
fire.
Installation and Relocation Do not position the unit in a location where
it is unstable.
To prevent fire or shock hazard, do not
expose this unit to rain or any...