Home > Panasonic > Door > Panasonic Door Station Vl Gc001an Installation And Operation Guide

Panasonic Door Station Vl Gc001an Installation And Operation Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Door Station Vl Gc001an Installation And Operation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Introduction and Installation
    LIf you want to connect the wires without them going through a hole in the wall behind the 
    mounting bracket, connect the wires by passing them through the ribs and the wire hole. 
    4Mount the door station to the mounting bracket.
    Push the door station down until it is secure.
    Rib
    Wire hole
    1
    2
    VL-GC001A.book  Page 11  Monday, February 28, 2005  12:08 PM 
    						
    							12
    Introduction and Installation
    5Insert the hex-head screw using the longer end of the allen wrench.
    6Attach the bolt cover using the shorter end of the allen wrench.
    LUse protrusion on the shorter end of the allen wrench to rotate the bolt cover until it is 
    secure.
    Hex-head screw
    Allen wrench
    Allen wrench
    VL-GC001A.book  Page 12  Monday, February 28, 2005  12:08 PM 
    						
    							13
    Help
    Cleaning
    Clean the unit with a soft, dry cloth when cleaning. For excessive dirt, wipe the unit with a 
    slightly damp cloth.
    Important information:
    LDo not use anything containing alcohol, polish powder, powder soap, benzine, thinner, wax, 
    petroleum, or boiling water. Also do not spray with insecticide, glass cleaner, or hair spray. 
    This could cause a change in color or quality.
    VL-GC001A.book  Page 13  Monday, February 28, 2005  12:08 PM 
    						
    							14
    General Information
    Technical data about this product
    Power supply*1:Standby: Approximately 5 V DC (2 mA)
    At operation: Approximately 20 V DC (180 mA)
    Dimensions:Approximately height 165 mm x width 90 mm x depth 35 mm 
    (6
    1/2 x 39/16 x 13/8)
    Mass (Weight):Approximately 330 g (0.72 lb.)
    Operating environment:
    –10 °C to 50 °C (14 °F – 122 °F), Up to 90% RH (Relative 
    Humidity) non condensing
    Installation method:Wall mount (Wall mount bracket included)
    External material:Aluminum
    *1 Supplied from the monitor station.
    Note:
    LDesign and specifications are subject to change without notice.
    LThe pictures and illustrations in these instructions may vary slightly from the actual 
    product.
    VL-GC001A.book  Page 14  Monday, February 28, 2005  12:08 PM 
    						
    							15
    General Information
    FCC and Other Information
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
    two conditions:
    (1) This device may not cause harmful interference.
    (2) This device must accept any interference received, including interference that may 
    cause undesired operation.
     
    CAUTION:
    Any changes or modifications not expressly approved by the party responsible for compliance 
    could void the user’s authority to operate this device.
    NOTE:
    This equipment has been tested and found to comply with the limits for a Class B digital 
    device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
    reasonable protection against harmful interference in a residential installation. This equipment 
    generates, uses, and can radiate radio frequency energy and, if not installed and used in 
    accordance with the instructions, may cause harmful interference to radio communications. 
    However, there is no guarantee that interference will not occur in a particular installation. If 
    this equipment does cause harmful interference to radio or television reception, which can be 
    determined by turning the monitor station off and on, the user is encouraged to try to correct 
    the interference by one or more of the following measures:
    — Reorient or relocate the receiving antenna.
    — Increase the separation between the equipment and receiver.
    — Connect the equipment into an outlet on a circuit different from that to which the receiver is 
    connected.
    — Consult the dealer or an experienced radio/TV technician for help.
    VL-GC001A.book  Page 15  Monday, February 28, 2005  12:08 PM 
    						
    							For your future reference
    Attach your sales receipt here.
    Panasonic Consumer Electronics Company, 
    Division of Panasonic Corporation of North America
    One Panasonic Way, Secaucus, New Jersey 07094, U.S.A.
    Panasonic Puerto Rico, Inc.
    San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, Carolina, Puerto Rico 00985, 
    U.S.A.
    Copyright:
    LThis material is copyrighted by Panasonic Communications Co., Ltd., and may be 
    reproduced for internal use only. All other reproduction, in whole or in part, is prohibited 
    without the written consent of Panasonic Communications Co., Ltd.
    © 2005 Panasonic Communications Co., Ltd. All Rights Reserved. 
    Date of purchase
    Serial number (found on the rear of the unit)
    Dealer’s name and address
    Dealer’s telephone number
    VL-GC001A.book  Page 16  Monday, February 28, 2005  12:08 PM 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Door Station Vl Gc001an Installation And Operation Guide