Panasonic Dual DIN Mobile Navigation System Cn Nvd905u Quick Reference Guidebook

							Panasonic Consumer
Electronics Company,
Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Puerto Rico, Inc. 
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
CN-NVD905U
Quick
Dual DIN in-dash HDD Mobile Navigation System with 7 Widescreen Color 
LCD Monitor/DVD Receiver
Système de navigation embarqué à disque dur de format 2-DIN 
avec récepteur DVD/moniteur couleur ACL grand écran de 7 po
Sistema de navegación portátil de doble DIN para tablero de mandos, con 
disco duro y monitor LCD panorámico de 7 en color y receptor con DVD
 
  CN-NVD905U
Quick Reference Guidebook
Manuel de référence
Guía de referencia rápida
   Read the “Safety information” presented in the Operating Instructions before 
using this product.
   This manual explains basic operations. Refer to the Operating Instructions for 
detailed operation methods.
   Avant d’utiliser le présent produit, veuillez lire les « informations sur la sécurité » 
décrites dans le manuel d’instructions.
   Le présent manuel décrit les opérations de base. Pour obtenir des informations 
détaillées sur l’utilisation, consultez le manuel d’instructions.
   Lea la “Información de seguridad” que aparece en las Instrucciones de 
funcionamiento antes de utilizar este producto.
   En este manual se explican operaciones básicas. Consulte los métodos de 
funcionamiento detallados en las Instrucciones de funcionamiento.
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.    YEFM262812  F0107-1037 
© 2007 Matsushita Electric Industrial Co., Ltd. Tous droits réservés.
 Printed in Japan
 Imprimé au Japon
 Impreso en Japan 
						

							Contents
Names of controls and functions ............................ 4
Create a route to the destination ............................ 5
Address search .............................................................. 6
POI (Point of interest) search ................................... 7
Nearest POI search ...................................................... 8
Emergency search ........................................................ 9
Address Book search ................................................. 10
Previous search ........................................................... 10
Map search ................................................................... 10
Coordinates search .................................................... 11
Phone number search ............................................... 11
Return Home ................................................................ 11
Display POI icons........................................................ 12
Search for nearby POI icons ................................... 13
Switch audiovisual source ...................................... 14
Turn the audiovisual source off ............................. 14
Switch from the Audiovisual screen to the 
navigation screen
 ....................................................... 14
Radio ............................................................................... 15
Disc operation (common) ........................................ 16
Disc operation (DVD) ................................................ 16
Disc operation (CD/MP3/WMA) ............................. 18
SIRIUS Satellite Radio control .............................. 19
XM Satellite Radio control ...................................... 19
iPod® control ................................................................ 20
English 
Français 
Español 
English
3
3 
						

							Contents
Names of controls and functions ............................ 4
Create a route to the destination ............................ 5
Address search .............................................................. 6
POI (Point of interest) search ................................... 7
Nearest POI search ...................................................... 8
Emergency search ........................................................ 9
Address Book search ................................................. 10
Previous search ........................................................... 10
Map search ................................................................... 10
Coordinates search .................................................... 11
Phone number search ............................................... 11
Return Home ................................................................ 11
Display POI icons........................................................ 12
Search for nearby POI icons ................................... 13
Switch audiovisual source ...................................... 14
Turn the audiovisual source off ............................. 14
Switch from the Audiovisual screen to the 
navigation screen
 ....................................................... 14
Radio ............................................................................... 15
Disc operation (common) ........................................ 16
Disc operation (DVD) ................................................ 16
Disc operation (CD/MP3/WMA) ............................. 18
SIRIUS Satellite Radio control .............................. 19
XM Satellite Radio control ...................................... 19
iPod® control ................................................................ 20
English 
Français 
Español 
English
3
3 
						

							Adjust navigation volume

  Select [Guide Speaker].

  Select a setting [1] – [7] to 
adjust volume.
  
  Select [Off] to cancel voice 
guidance.
Touch [Enter] 
when the map displaying 
the destination appears.
A search is made for the route 
from the vehicle position to the 
destination.
   The destination (set location) is 
marked with a 
.
Destination setting screen
Checking the route to be used
The route selection status for the route 
to use is displayed.
Example:
 : Use
 :  Do not use
   :  Highway
  :  Time-restricted road
   :  Ferry
   :  Toll road
   :  Seasonally restricted road
   :  Car train
  [Road preference]:
 The type of road to use can be 
changed.
Create a route to the destination
Search for the destination 
on the Navigation menu.
1Press  button.
2Select [Destination].
3Select a search method.
   Select [Others] to display all 
search methods.
  
Go to step 4
4Select a search method.
page 6
page 7
page 8
page 9
page 10
page 10
page 10
page 11
page 11
page 11
To switch the  search area

 Touch [Change].

 Touch the area to search.


 Select [OK].
   The area to search switches.
Touch [Start] 
when the All route screen 
is displayed.
Route guidance begins. 
All route screen
Distance and time display
The distance and time (such as 
estimated  arrival time or  remaining 
time) to the next destination are 
displayed. 
Roads and distances used
The total route length is displayed, 
together with the distances using 
highways, toll roads, time-restricted 
roads, seasonally restricted roads, 
ferries and car trains.
To check the route
[3 routes]:   Three types of routes to the 
destination are displayed. 
[Route]:     The Change Route screen 
is displayed. 
Names of controls and functions
 (Volume)    Adjusts  audiovisual  volume.  (Tune/Track)   Selects a station.   Skips a track/chapter.    Fast forward/Fast reverse 
 (Map)
   Displays the vehicle position 
(current position). 
 (Navigation)
   Displays the Navigation menu. 
 (Source)
   Displays the Audiovisual source 
operation screen.
SD Memory card slot   Only used for map data and 
software updates.
It cannot be used for playing back 
audio format such as SD audio.CD/DVD slot
Panel open
   Displays the Destination menu.Remote control sensor
   Use this to operate the Car TV 
(CY-TUN153U, option) with the 
remote control unit provided.
Navigation and other audiovisual 
operations cannot be performed from 
the remote control unit.
  


   Displays all search methods.
 (Open)
   Displays/hides the Open/Tilt/Eject 
screen.
   Closes the monitor.
EnglishEnglish
45
5 4                                 
						

							Adjust navigation volume

  Select [Guide Speaker].

  Select a setting [1] – [7] to 
adjust volume.
  
  Select [Off] to cancel voice 
guidance.
Touch [Enter] 
when the map displaying 
the destination appears.
A search is made for the route 
from the vehicle position to the 
destination.
   The destination (set location) is 
marked with a 
.
Destination setting screen
Checking the route to be used
The route selection status for the route 
to use is displayed.
Example:
 : Use
 :  Do not use
   :  Highway
  :  Time-restricted road
   :  Ferry
   :  Toll road
   :  Seasonally restricted road
   :  Car train
  [Road preference]:
 The type of road to use can be 
changed.
Create a route to the destination
Search for the destination 
on the Navigation menu.
1Press  button.
2Select [Destination].
3Select a search method.
   Select [Others] to display all 
search methods.
  
Go to step 4
4Select a search method.
page 6
page 7
page 8
page 9
page 10
page 10
page 10
page 11
page 11
page 11
To switch the  search area

 Touch [Change].

 Touch the area to search.


 Select [OK].
   The area to search switches.
Touch [Start] 
when the All route screen 
is displayed.
Route guidance begins. 
All route screen
Distance and time display
The distance and time (such as 
estimated  arrival time or  remaining 
time) to the next destination are 
displayed. 
Roads and distances used
The total route length is displayed, 
together with the distances using 
highways, toll roads, time-restricted 
roads, seasonally restricted roads, 
ferries and car trains.
To check the route
[3 routes]:   Three types of routes to the 
destination are displayed. 
[Route]:     The Change Route screen 
is displayed. 
Names of controls and functions
 (Volume)    Adjusts  audiovisual  volume.  (Tune/Track)   Selects a station.   Skips a track/chapter.    Fast forward/Fast reverse 
 (Map)
   Displays the vehicle position 
(current position). 
 (Navigation)
   Displays the Navigation menu. 
 (Source)
   Displays the Audiovisual source 
operation screen.
SD Memory card slot   Only used for map data and 
software updates.
It cannot be used for playing back 
audio format such as SD audio.CD/DVD slot
Panel open
   Displays the Destination menu.Remote control sensor
   Use this to operate the Car TV 
(CY-TUN153U, option) with the 
remote control unit provided.
Navigation and other audiovisual 
operations cannot be performed from 
the remote control unit.
  


   Displays all search methods.
 (Open)
   Displays/hides the Open/Tilt/Eject 
screen.
   Closes the monitor.
EnglishEnglish
45
5 4                                 
						

							POI (Point of interest) search
Use a POI name to search for a 
destination.
1Select [POI] from the 
Destination menu  (All).
(page 4)
2Enter the name.
3Set the search conditions.
  To re ne your search by 
category
 Select  [Category].
  Go to step 4 - 
  To re ne your search by 
city
 Select [City].
  Go to step 4 - 
  If there is no re ne search 
setting
 Select [List].
  Go to step 5
 
Search by category
4


Select a main category.
   Select [List all categories] to 
display the sub-categories 
within all main categories.
4


Select a sub-category.
  Go to step 3
Search by city
4


Select [Input city name].
  To search for a city from 
previous city searches
   Select the city from the list 
(up to 5).
 
  Go to step 3   Select [Search Area] to change 
the Search area. (
page 5)
 
 Go to step 2
4


Enter the city name and 
select [List].
4


Select the city from the list.
  Go to step 3
5Select the POI from the list.
   The map is displayed.   If there are multiple facilities 
of the same name in the same 
category, such as branches 
of a supermarket chain, the 
number of applicable facilities 
is displayed next to the icon. 
When a POI with multiple 
instances is selected, the 
branches are listed.
   The list can be sorted.
   [Dist. sort]: 
The list is sorted in order of 
proximity.
 
  [Name sort]:
The list is sorted in 
alphabetical order.
6Select [Enter].
7Select [Start].
  Route guidance starts.
Address search
Search for the destination address 
from the street name.
1Select [Address] from the 
Destination menu (All).
(page 4)
2  To search by street
  Enter the street name.
  Go to step 3 - 
  To search by city
 Select [City].
  Go to step 3 - 
Search by street
3


Select [List].
3


Select the street from the 
list.
3


Select the city from the list.
   The address range list is 
displayed.
 
 Go to step 4   Select [Input name] to re ne 
your search by city.
Search by city
3


Select [Input city name].
  To search for a city from 
previous city searches
   Select the city from the list 
(up to 5)
.
  Go to step 3 - 
    Select [Search Area] to change 
the Search area. (
page 5)
 
 Go to step 2
3


Enter the city name and 
select [List].
3


Select the city from the list.
3


Enter the street name and 
select [List].
   Choosing [List] without 
inputting a street name lists all 
streets in that city.
3


Select the street from the 
list.
   The address range list is 
displayed.
 
 Go to step 4
4Select the address range 
from the list.
5Enter the house number and 
select [OK].
   The map is displayed.
6Select [Enter].
7Select [Start].
  Route guidance starts.
Note:
   If there is only one candidate for city, 
address range and house number, 
the list is not displayed, and the 
process advances to the next step.
   If there is no city or address range 
data for the selected street, the map 
is displayed for an area centered 
around the street.
   To cancel re nement by city, select 
[City], then [Any city].
EnglishEnglish
67
7 6                     
						

							POI (Point of interest) search
Use a POI name to search for a 
destination.
1Select [POI] from the 
Destination menu  (All).
(page 4)
2Enter the name.
3Set the search conditions.
  To re ne your search by 
category
 Select  [Category].
  Go to step 4 - 
  To re ne your search by 
city
 Select [City].
  Go to step 4 - 
  If there is no re ne search 
setting
 Select [List].
  Go to step 5
 
Search by category
4


Select a main category.
   Select [List all categories] to 
display the sub-categories 
within all main categories.
4


Select a sub-category.
  Go to step 3
Search by city
4


Select [Input city name].
  To search for a city from 
previous city searches
   Select the city from the list 
(up to 5).
 
  Go to step 3   Select [Search Area] to change 
the Search area. (
page 5)
 
 Go to step 2
4


Enter the city name and 
select [List].
4


Select the city from the list.
  Go to step 3
5Select the POI from the list.
   The map is displayed.   If there are multiple facilities 
of the same name in the same 
category, such as branches 
of a supermarket chain, the 
number of applicable facilities 
is displayed next to the icon. 
When a POI with multiple 
instances is selected, the 
branches are listed.
   The list can be sorted.
   [Dist. sort]: 
The list is sorted in order of 
proximity.
 
  [Name sort]:
The list is sorted in 
alphabetical order.
6Select [Enter].
7Select [Start].
  Route guidance starts.
Address search
Search for the destination address 
from the street name.
1Select [Address] from the 
Destination menu (All).
(page 4)
2  To search by street
  Enter the street name.
  Go to step 3 - 
  To search by city
 Select [City].
  Go to step 3 - 
Search by street
3


Select [List].
3


Select the street from the 
list.
3


Select the city from the list.
   The address range list is 
displayed.
 
 Go to step 4   Select [Input name] to re ne 
your search by city.
Search by city
3


Select [Input city name].
  To search for a city from 
previous city searches
   Select the city from the list 
(up to 5)
.
  Go to step 3 - 
    Select [Search Area] to change 
the Search area. (
page 5)
 
 Go to step 2
3


Enter the city name and 
select [List].
3


Select the city from the list.
3


Enter the street name and 
select [List].
   Choosing [List] without 
inputting a street name lists all 
streets in that city.
3


Select the street from the 
list.
   The address range list is 
displayed.
 
 Go to step 4
4Select the address range 
from the list.
5Enter the house number and 
select [OK].
   The map is displayed.
6Select [Enter].
7Select [Start].
  Route guidance starts.
Note:
   If there is only one candidate for city, 
address range and house number, 
the list is not displayed, and the 
process advances to the next step.
   If there is no city or address range 
data for the selected street, the map 
is displayed for an area centered 
around the street.
   To cancel re nement by city, select 
[City], then [Any city].
EnglishEnglish
67
7 6                     
						

							3Select [Add to 
].
  Select [New 
] to delete all 
currently set destinations and 
set as new destinations.
4Select [Add] for the section 
to add.
5Select [Start].
  Route guidance starts.
Note:
   If no route is displayed on the map 
screen, it is not possible to search 
for POIs along the route.The search  nds hospitals/police stations/service & maintenance within a 
radius of 100 miles (160 km
*).
*   This is the range when “km” is set as the distance setting 
(
 Operating Instructions).
When stopped
1Select [Emergency] from the 
Destination menu (All).
(page 4)
2Select a category from the 
list.
   The list of POIs is displayed.
3Select the POI from the list.
   The list can be sorted.
  [Name sort]: 
   The list is sorted in alphabetical 
order.
  [Dist. sort]: 
  The list is sorted in order of 
proximity.
4Select [Enter].
5Select [Start].
  Route guidance starts.
In motion
If the driver is also the operator of the 
navigation system, he or she must 
stop the vehicle in a safe place before 
operating it.
1Select [Emergency] from the 
Destination menu (All).
(page 4)
2Select a category from the 
list.
   The nearest POI to the current 
position is displayed.
3Select [Enter].
4Select [Start].
  Route guidance starts.
Emergency search
Searches for POIs in the area around the current position, the destination and the 
last map displayed.
1Select [Nearest POI] from the 
Destination menu (All).
(page 4)
2Select the point for the 
center of the search.
[Current Position]: 
Current position screen
[Map]: 
Last displayed map
[1]/[2]/[3]/[4]/[5]: 
Destination and transit 
destinations
3Move the cursor to the center 
of the area to search and 
select [Enter].
4Select a main category.
   Select [List all categories] to 
display the sub-categories 
within all main categories.
5Select a sub-category and 
select [OK].
   Up to 5 sub-categories can be 
selected.
   To cancel a selected 
sub-category, select it again.
6Select [Show list].
  POIs within a radius of 20 miles 
(32 km
*) of the search position 
(the current position or the cursor 
position on the Map mode screen) 
are searched for and listed in 
order of proximity to the current 
position. Up to 200 matches can 
be made.
*   This is the range when “km” 
is set as the distance setting. 
(
 Operating Instructions)   To re-select sub-categories, 
select [Select category] and 
repeat from step 4.
7Select the POI from the list.
   The map is displayed.   The displayed distance is the 
straight distance from the 
vehicle position to the POI.
   Select [Sort by] to sort the list.
  [Distance]:
The list is sorted in order of 
proximity.
  [Category]: 
The list is sorted by category.
  [Name]:
 The list is sorted in alphabetical 
order.
   Select [On route] to search for 
POIs along the guidance route. 
(
 right)   [On route] is not displayed if 
route guidance is not in use.
8Select [Enter].
9Select [Start].
  Route guidance starts.
Search for POIs along the route
Only POIs that are on or close to 
the guidance route are searched for 
and displayed. The search range is a 
distance of 150 ft (50 m*) from either 
side of the route.
*   This is the range when “km” is set 
as the distance setting (
 Operating 
Instructions).
1Select [On route] from the 
Nearest POI 
( left, step 7) or 
nearest POI 
( page 13, step 4) 
search list.
   POIs found by the search are 
listed, and the touch keys 
show the name, the icon, and 
the distance along the route 
from the current position.
   Select [Sort by] to sort the list.
  [Distance]: 
   The list is sorted in order of 
proximity.
  [Category]: 
   The list is sorted by category.
  [Name]:
   The list is sorted in alphabetical 
order.
2Select a POI.
   The map is displayed.   The POI name and the distance 
along the route from the 
current position are displayed 
on the map.
Nearest POI search
EnglishEnglish
89
9 8              
						

							3Select [Add to 
].
  Select [New 
] to delete all 
currently set destinations and 
set as new destinations.
4Select [Add] for the section 
to add.
5Select [Start].
  Route guidance starts.
Note:
   If no route is displayed on the map 
screen, it is not possible to search 
for POIs along the route.The search  nds hospitals/police stations/service & maintenance within a 
radius of 100 miles (160 km
*).
*   This is the range when “km” is set as the distance setting 
(
 Operating Instructions).
When stopped
1Select [Emergency] from the 
Destination menu (All).
(page 4)
2Select a category from the 
list.
   The list of POIs is displayed.
3Select the POI from the list.
   The list can be sorted.
  [Name sort]: 
   The list is sorted in alphabetical 
order.
  [Dist. sort]: 
  The list is sorted in order of 
proximity.
4Select [Enter].
5Select [Start].
  Route guidance starts.
In motion
If the driver is also the operator of the 
navigation system, he or she must 
stop the vehicle in a safe place before 
operating it.
1Select [Emergency] from the 
Destination menu (All).
(page 4)
2Select a category from the 
list.
   The nearest POI to the current 
position is displayed.
3Select [Enter].
4Select [Start].
  Route guidance starts.
Emergency search
Searches for POIs in the area around the current position, the destination and the 
last map displayed.
1Select [Nearest POI] from the 
Destination menu (All).
(page 4)
2Select the point for the 
center of the search.
[Current Position]: 
Current position screen
[Map]: 
Last displayed map
[1]/[2]/[3]/[4]/[5]: 
Destination and transit 
destinations
3Move the cursor to the center 
of the area to search and 
select [Enter].
4Select a main category.
   Select [List all categories] to 
display the sub-categories 
within all main categories.
5Select a sub-category and 
select [OK].
   Up to 5 sub-categories can be 
selected.
   To cancel a selected 
sub-category, select it again.
6Select [Show list].
  POIs within a radius of 20 miles 
(32 km
*) of the search position 
(the current position or the cursor 
position on the Map mode screen) 
are searched for and listed in 
order of proximity to the current 
position. Up to 200 matches can 
be made.
*   This is the range when “km” 
is set as the distance setting. 
(
 Operating Instructions)   To re-select sub-categories, 
select [Select category] and 
repeat from step 4.
7Select the POI from the list.
   The map is displayed.   The displayed distance is the 
straight distance from the 
vehicle position to the POI.
   Select [Sort by] to sort the list.
  [Distance]:
The list is sorted in order of 
proximity.
  [Category]: 
The list is sorted by category.
  [Name]:
 The list is sorted in alphabetical 
order.
   Select [On route] to search for 
POIs along the guidance route. 
(
 right)   [On route] is not displayed if 
route guidance is not in use.
8Select [Enter].
9Select [Start].
  Route guidance starts.
Search for POIs along the route
Only POIs that are on or close to 
the guidance route are searched for 
and displayed. The search range is a 
distance of 150 ft (50 m*) from either 
side of the route.
*   This is the range when “km” is set 
as the distance setting (
 Operating 
Instructions).
1Select [On route] from the 
Nearest POI 
( left, step 7) or 
nearest POI 
( page 13, step 4) 
search list.
   POIs found by the search are 
listed, and the touch keys 
show the name, the icon, and 
the distance along the route 
from the current position.
   Select [Sort by] to sort the list.
  [Distance]: 
   The list is sorted in order of 
proximity.
  [Category]: 
   The list is sorted by category.
  [Name]:
   The list is sorted in alphabetical 
order.
2Select a POI.
   The map is displayed.   The POI name and the distance 
along the route from the 
current position are displayed 
on the map.
Nearest POI search
EnglishEnglish
89
9 8              
						

							Use coordinates to search for a 
destination.
1Select [Coordinates] from 
the Destination menu (All).
(page 4)
2Enter the coordinates and 
select [OK].
   When entering a latitude, select 
[N] for north and [S] for south; 
and select [E] for east and 
[W] for west when entering a 
longitude.
   To correct the coordinates, 
select [
] to delete digits one 
at a time.
   A map is displayed according 
to the coordinates input.
3Select [Enter].
4Select [Start].
  Route guidance starts.
Coordinates search
Once the home location is registered, it 
is simple to  nd a route home from the 
current position.
   You must register the home location 
to use this feature. 
(
 Operating Instructions)
1Select [Home] from the 
Destination menu (All).
   Starts the route search.
2Select [Start].
  Route guidance starts.
If home location has not been 
registered
Select [Home] from the Destination 
menu (All) to display the Set Home 
con rmation screen.
1Select [Yes] on the Set Home 
con rmation screen.
2Search for home.
3Select [Enter].
   Home is registered. Use a telephone number to search for 
a destination.
1Select [Phone No.] from the 
Destination menu (All).
(page 4)
2Enter the telephone number 
and select [OK].
   The telephone number list is 
displayed.
   To correct the number, select 
[
] to delete digits one at a 
time.
3Select the POI from the list.
   The map is displayed.   Numbers with different area 
codes are also displayed.
   A list is not displayed if there is 
only one matching number.
4Select [Enter].
5Select [Start].
  Route guidance starts.
Phone number searchReturn Home
Search for a destination from among 
registered Contacts.
   You must register locations 
to use this feature. 
(
 Operating Instructions)
1Select [Address Book] from 
the Destination menu (All).
(page 4)
2Select the Contact from 
the list.
   The list can be sorted.
  [Icon]: 
   Display according to the type 
of icon.
  [Date]: 
   Display Contacts in order of 
registration.
3Select [Enter].
4Select [Start].
  Route guidance starts.Automatically store set destinations 
and search for destinations from that 
history. (Up to 20 destinations)
1Select [Previous] from the 
Destination menu (All).
(page 4)
2Select a previous point 
from the list.
   Select [Previous start point] 
to display the previous start 
point.
3Select [Enter].
4Select [Start].
  Route guidance starts.
Note:
   When there are more than 20 routes, 
the oldest are deleted sequentially. 
Address Book searchPrevious search
Search for a destination from the map.
1Select [Map] from the 
Destination menu (All).
(page 4)
2Move the cursor to the position 
to set as the destination and 
select [Enter].
3Select [Start].
  Route guidance starts.
Map search
EnglishEnglish
1011
11 10