Panasonic Dvd Player Receiver Cq Vd7001 Installation Safety Information Manual

							ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09
PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AV
DISP
RET
DVD1
2
3
4
5
6
7
80
9SUB
ANGLE
AUDIOTITLE
22
23
CQ-VD7001W
CQ-VD7001W
Disc Player
(continued)
[SUB]
[TITLE][]] [[] [}] [{] 
[ENTER]
[0]– [9] [DISP]
[DVD][RET]
[ANGLE] [AUDIO]
Note:
¡If no operation is performed for 10 seconds or  /[DISP]
is touched/pressed, the operation buttons disappear.
¡It may not be possible to switch the language unless the unit is at the DVD menu (
aprevious page) or is at the DVD set-
tings. (
apage 42)
¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. 
¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-
guage/angle.
OperationsOperations
DVD VTRRADIOCH-CEND
CompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
DVDDVDDVD
Subtitle Language
It is possible to change the subtitle language during play if multiple languages
are recorded on the disc.
Note:
¡There may be a brief delay before the subtitles appear.
DVDDVDDVD
Audio Language
It is possible to change the audio language during play if multiple audio lan-
guages are recorded on the disc.It is possible to switch the audio between stereo sound and monaural sound (L
or R).
DVDDVDDVD
Angle
For DVDs which contain scenes which have been shot simultaneously from a
number of different angles the same scene can be viewed from each of these
different angles during play.
VCDVCDVCD
Stereo & Monaural
: stereo sound
d
: the left channel audio is output on both the left and right
speakers.
d
: the right channel audio is output on both the left and right
speakers. MONO.R
MONO.LSTEREO
[SUB]–
¡Touch/press during playback.
[AUDIO]–
¡Touch/press during playback.
[ANGLE]–
¡Touch/press during playback.
[AUDIO]–
Useful Function
To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.
DVD
mode display
Note:
¡For VCD mode, press the numerical key to enter a number directly. 
¡If no operation is performed for 8 seconds after you have touched [TITLE], the operation buttons disappear.
¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the number
of the title/chapter entered. *2On-Screen Direct Operation (Only for DVD)
Some DVDs allow you to operate the DVD menu by touch-
ing the screen.
In such a case, if your targeted button is located too close
to other buttons, a part of the screen may be enlarged in
order that you can press the button for sure.Note:¡When the current disc is not ready for the on-screen
direct operation, perform operations with the buttons on
the remote control or the unit.
¡The on-screen direct operation of the DVD menu is not
available in the DVD changer mode.
Moving operation buttons (Only for DVD)
When the operation buttons interfere with operations,
press  . The buttons are transferred as shown below.Showing Mode button and Menu button
Press  . The Mode button and Menu button appear.
Mode button
(apage 15)
Menu button
(apage 15)
OperationsOperations
DVD VTRRADIOCH-CEND
CompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
*1
VCDVCDVCDDVDDVDDVD
Showing menu and 
selecting an item
[DVD]
or
[RET]*
1
–
[]] [[]
[}] [{] –*
2–*2–[]] [[]
[}] [{]
d d
[ENTER]d
[ENTER]
[RET]–
–
–
–
qMenu appears.
wSelect the desired item.
eDetermine the setting.
d
d d dd dReturns to the previous display.
qToggles “Chapter number input mode”
and “Title number input mode”.
wInput desired number.
ePlayback starts.
Starting Playback 
from a specific 
chapter/title
Note:
¡For retrying selection during number entry, touch/press  /[RET]
.
*1Note on VCD:
For VCD, touch/press
/[RET]
instead of
/[DVD]
.Touch the numerical
key to enter a number
directly
[TITLE]
to [0] to [9]
[ENTER]
DVDDVDDVD
d d
d
d d *
1
or
Chapter/title Selection 
						

							24
25
CQ-VD7001W
CQ-VD7001W
Notes on MP3/WMAWhat is MP3/WMA?MP3 (MPEG Audio Layer-3) and WMA (Windows Media
TMAudio)
are the compression formats of digital audio. The former is
developed by MPEG (Motion Picture Experts Group), and the
latter is developed by Microsoft Corporation. Using these
compression formats, you can record the contents of about 10
music CDs on a single CD (This figure refers to data recorded on
a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a
sampling frequency of 44.1 kHz).
Note:
¡MP3/WMA encoding and CD writing software programs are
not supplied with this unit.
Points to remember when making MP3/WMA filesCommon¡High bit rate and high sampling frequency are recommended
for high quality sound.
¡Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
¡The playback sound quality differs depending on the encoding
circumstances. For details, refer to the instructions of your
own encoding software and writing software.MP3¡It is recommended to set the bit rate to “128 kbps or more”
and “fixed”.WMA¡It is recommended to set the bit rate to “64 kbps or more”
and “fixed”.
¡Do not set the copy protection on the WMA file to enable this
unit to play back.
Display InformationDisplayed items
Displayable characters¡Displayable length of file name/folder name: within 128 char-
acters.
¡Name files and folders in accordance with the standard of
each file system. Refer to the instructions of writing software
for details.
¡ASCII character set and special characters in each language
can be displayed.
ASCII character setA to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [  ] ˆ _ ` { | }
~Note:
¡With some software in which MP3/WMA format files have
been encoded, the character information may not be dis-
played properly.
¡Undisplayable characters and symbols will be converted into
an asterisk (
*). 
¡It is recommended that the length of the file name is less than
8 (excluding the file extension).
¡CD-TEXT
Disc title
Track title
¡MP3/WMA
Folder name
File name¡MP3 (ID3 tag)
Album name
Title and artist name
¡WMA (WMA tag)
Album name
Title and artist name
Caution
¡Never assign the “.mp3”, or “.wma” file name
extension to a file that is not in the MP3/WMA
format. This may not only produce noise from
the speaker damage, but also damage your
hearing.
¡You are recommended to minimize the chances of making a
disc that contains both CD-DA files and MP3/WMA files.
¡If CD-DA files are on the same disc as MP3 or WMA files,
the songs may not play in the intended order, or some
songs may not play at all.
¡When storing MP3 data and WMA data on the same disc,
use different folders for each data.
¡Do not record files other than MP3/WMA files and unneces-
sary folder on a disc.
¡The name of an MP3/WMA file should be added by rules as
shown in the following descriptions and also comply with the
rules of each file system.
¡The file extension “.mp3” or “.wma” should be assigned to
each file depending on the file format.¡You may encounter trouble in playing MP3/WMA files or dis-
playing the information of MP3/WMA files recorded with cer-
tain writing software or CD recorders.
¡This unit does not have a play list function.
¡Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
Supported file systemsISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Romeo
Note: 
¡Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported.
Recording MP3/WMA files on a CD-media
Folder selection order/file playback orderMaximum number of files/folders¡Maximum number of files: 512
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
¡Maximum number of folders: 255 (Root folder is included.)
Note:
¡This unit counts the number of folders irrespective of the presence or
absence of an MP3/WMA file. 
¡If the selected folder does not contain any MP3/WMA files, the near-
est MP3/WMA files in the order of playback will be played.
¡Playback order may be different from other MP3/WMA players even if
the same disc is used.
¡“ROOT” appears when displaying the root folder name.
CopyrightIt is prohibited by copyright laws to copy, distribute and deliver
copyrighted materials such as music without the approval of
copyright holder except enjoying yourself personally.No warrantyAbove description complies with our investigations as of
December 2004. It has no warranty for reproducibility and
displayability of MP3/WMA.
Recording MP3/WMA files on a CD-media
32, 44.1, 48 kHz No 64 k – 192 kbps Windows Media Audio Ver. 2, 816, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3)32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3)Sampling frequency VBR Bit rate Compression method
Compression formats 
(Recommendation:
“Points to remember when making MP3/WMA files” on the previous page)
Windows Media, and the
Windows logo are trademarks,
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries.
2 1
43
q
q ew
r
t
yy5
6
7
1
8
8
–
–
Root Folder
(Root Directory)
Folder Selection
In the order
File Selection
In the order
Tree 1  Tree 2  Tree 3 
Tree 4 Tree 8
(Max.) 
						

							26
27
CQ-VD7001W
CQ-VD7001W
Radio
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001W
TILT
TEXTTUNE /
TRACKENTER
MODE
Frequency
Preset stations
Indicates the
intensity of the
radio wave.
Auto presetting
Stereo indicator Band
selection
*1 List 
selection
Tuning
[MODE]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE1
2
3
4
5
6
[]] [[]
[ENTER]
[MODE]
[]] [[] [ENTER][1]– [6]
[ENTER] [ENTER]
Operations
DVD VTRRADIOCH-CEND
Band Selection
List SelectionRefer to the next page.Station
Selection
Seek TuningRadio Mode Selection
qTouch “
Mode Button”
. (
apage 15)
wTouch (RADIO)on the Mode
Selection Screen.
Press [MODE]to change to the Radio
mode.
DVD VTRRADIOCH-CEND
……
Touch/Press and hold
……
Touch/Press and hold [
[][
[]Up
[
]][
]]Down
[
[][
[]Up
[
]][
]]Down
Touch/press and hold for more than 0.5 second then release. Seeking starts.FM 1
FM 2
FM 3
AM
Mode Button (apage 15)
Manual Preset
MemoryUp to 6 stations can be
preset in each band. Preset Station
Calling
to
CH116to
Auto Preset
Memory
6 stations with first to 6th highest in signal
strength of each band will be preset.
[ENTER]
to
CH116to
Preset Swap
qSelect the list and the preset number that contains the channel to be interchanged 
(see “Preset station calling” above).
w Select the list and hold down the preset number that contains the targeted channel for
more than 2 seconds.
The preset channel selected in the step qis
interchanged with the targeted preset chan-
nel selected in the step w(Preset Swap).
Select a band and frequency.¡Touch/press and hold for more than 2 seconds.¡The frequency blinks once, and a receiving station is saved in the memory.
New stations overwrite existing saved stations.¡Touch/press and hold for more than 2 seconds.¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved stations.¡Touch/press and hold for more than 2 seconds.¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved stations.
[ENTER]
In total 18 FM stations are
automatically preset. 
A channel preset is inter-
changeable with another
channel preset.B
–– [ENTER] [ENTER]–
Six stations are automati-
cally preset in each band.A
to
[1]
to
[6]
[ENTER]
[ENTER]
LIST 1
LIST 2
LIST 3
AM
*3
There are 6 stations in each list. You can call up next 6 stations by switching from one list
to another. *3 From the touch panel, you can toggle only Lists 1-3, but not  . To change to  ,
touch/press /[ENTER]
. 
AM
AM
Tuning
Preset Memory
blinks once
Select a band.Select a band or a list.¡Touch/press desired preset button.
18
stations with first to 18th highest in signal
strength of all FMs will be preset at once.
*2  The displayed contents on the
touch panel vary with circum-
stances. *2  The displayed contents on the
touch panel vary with circum-
stances. *
2*2
Preparation:
Select (all). (
apage 45)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL
Preparation:
Select (each). (
apage 45)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
EACH
Preparation:
Select (all). (
apage 45)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL
Preparation:
Select (all). (
apage 45)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL
*1Appears when  (all) is selected. (
apage 45)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL 
						

							28
29
CQ-VD7001W
CQ-VD7001W
VTR
AUX
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001W
TILT
TEXTTUNE /
TRACK
MODE
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
qTouch “
Mode Button”
. (
apage 15)
wTouch (VTR)on the Mode Selection
Screen.
Press [MODE]to change to the VTR
mode.
DVD VTRRADIOCH-CEND
Preparation:
¡Connect an optional external device to the unit.VTR Mode SelectionYou can view the images and listen to the sounds from the connected external devices in the VTR mode respectively.Note:
¡You can set up the system so that the VTR mode is not
selected (mode skip). (
apage 44) (VTR set to NAVI INPUT
is not skipped even if  (mode skip) is set to 
(on).)
¡If no operation is performed for 10 seconds or  /[DISP]
is touched/pressed, the operation buttons disappear.
¡VTR terminal is not used for the Panasonic car navigation
system (available in future). Refer to 
(Navigation Setup) for setting. (
apage 43)
NAVI SETUP
ON
MODE SKIP
[MODE]
[DISP]
[MODE]
qTouch “
Mode Button”
. (
apage 15)
wTouch (AUX)on the Mode Selection
Screen.
Press [MODE]to change to the AUX
mode.
DVD VTRRADIOCH-CEND
Preparation:
¡Connect an optional external device to the unit.AUX Mode SelectionYou can view the images and listen to the sounds from the connected external devices in the AUX mode respectively.Note:
¡You can set up the system so that the AUX mode is not
selected 
(mode skip)
. (
apage 44)
Mode Button (apage 15)
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001W
TILT
TEXTTUNE /
TRACK
MODE
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
[MODE]
[MODE]
Mode Button (apage 15)
To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control. 
						

							31
CQ-VD7001W
30
CQ-VD7001WCD Changer Control
DVD Changer Control
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001W
TILT
TEXTTUNE /
TRACKENTER
MODE
Total track number Disc number
Total time
Disc selection Current track
Track selection
Mode Button (apage 15)
Random Play
Scan Play
Repeat Play[]][[]
[}] [{][]][[]
[}] [{]
[MODE][RAND][REP]
[RAND]
[SCAN]
[REP] [DVD]
[RET]
[TITLE]
[AUDIO]
[ANGLE]
[SUB] [MODE]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODERAND
SCAN
REP
[d]
[s]
CD Changer Mode Selection
qTouch “
Mode Button”
. (
apage 15)
wTouch (CH-C) on the Mode Selection
Screen.
Press [MODE]to change to the CD
Changer mode.
DVD VTRRADIOCH-CEND
¡CD changer functions are designed for optional
Panasonic CD changer unit. (CX-DP880)Preparation:
¡Connect the CD changer, and load a magazine (discs).
[SCAN][}] [{]
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001W
TILT
TEXTTUNE /
TRACKENTER
MODE
Disc/folder
selection
Operation
Buttons
Mode Button (apage 15)To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.DVD Changer Mode Selection
qTouch “
Mode Button”
. (
apage 15)
wTouch (CH-C)on the Mode Selection
Screen.
Press [MODE]to change to the DVD
Changer mode.
DVD VTRRADIOCH-CEND
……
Touch/Press and hold
[MODE]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
RET
DVD
RAND
SCAN
REP
1
2
3
4
5
6
7
80
9SUB
ANGLE
AUDIOTITLE
[3] [y] [5]
[s] [d]
[}] [{]
[]][[]
[}] [{]
[ENTER]
[0]– [9][DISP] [MODE]
* Touch panel symbols will change to indicate these current mode. 
,  ,  {D= DISC (disc)}
……
Touch/Press and hold
¡DVD changer functions are designed for optional
Panasonic DVD changer unit. (CX-DH801W)
Preparation:
¡Connect the DVD changer, and load a magazine (discs).
Note:¡Be sure to connect RCA cord of the Panasonic DVD
Changer to CH/AUX-IN. Otherwise the changer cannot be
controlled through this unit.  (apage 67)
¡Refer to the operating instructions and installation
instructions of CX-DH801W as well.
OperationsOperations
DVD VTRRADIOCH-CEND
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVDCompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
DVDDVDDVD
Track/file Selection
Fast Forward/
Fast Reverse
Note:
¡When playing a DVD, there are cases where it is not possible to return to the
start of a chapter that spans 2 titles. (apage 56)
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
The speed changes if the button is held down as follows.
Regular speed / 2 times / 5 times / 10 times / 30 times
Folder Selection
MP3MP3MP3
Stop
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
To resume playback, touch/press /
[5].
Pause
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
To resume playback, touch/press /
[5].
[d]
[s]
[}]
– – – – –
–
– [{]
[3]
[y]Next track/file
Beginning of the current track/file
Previous track/file (Touch/press twice.)
[d]
[s]Fast forward
Release to resume playback.
Fast reverse
Release to resume playback.
Next folder
Previous folder
Basic Operations
Operations
Track Selection
DVD VTRRADIOCH-CEND
Disc Selection
[}
]
[
{
][
}
]
[
{
]Next disc
Previous disc
Fast Forward/
Fast ReverseRepeat PlayRepeat Play within the
current DiscScan PlayRandom Play
Random Play within the
Current Disc
[d][[]
[s][]]Fast reverse
Release to resume playback.
Fast forward
Release to resume playback.
[REP]
–
–
–
–
– [SCAN]
[RAND][RAND][REP]
To cancel, touch/press and hold for more than 2 sec-
onds again. To cancel, touch/press again. To cancel, touch/press and hold for more than 2 sec-
onds again. To cancel, touch/press again.
To cancel, touch/press again.
Disc Scan Play
– [SCAN]
The first 10 seconds of the all the discs is played.
To cancel, touch/press and hold for more than 2 sec-
onds again.
Basic Operations
*
*
*
[d]
[s][[]
[]]Next track
Beginning of the current track
Previous track (Touch/press twice.)
[]][[]
[}] [{] 
						

							3233
CQ-VD7001W
CQ-VD7001W
DVD Changer Control 
(continued)
Note:
¡If no operation is performed for 10 seconds or  /[DISP]
is touched/pressed, the operation buttons disappear.
¡It may not be possible to switch the language unless the unit is at the DVD menu (
aprevious page) or is at the DVD set-
tings. (
apage 42)
¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. 
¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-
guage/angle.
DVDDVDDVD
Subtitle Language
It is possible to change the subtitle language during play if multiple languages
are recorded on the disc.
Note:
¡There may be a brief delay before the subtitles appear.
DVDDVDDVD
Audio Language
It is possible to change the audio language during play if multiple audio lan-
guages are recorded on the disc.It is possible to switch the audio between stereo sound and monaural sound (L
or R).
DVDDVDDVD
Angle
For DVDs which contain scenes which have been shot simultaneously from a
number of different angles the same scene can be viewed from each of these
different angles during play.
VCDVCDVCD
Stereo & Monaural
: stereo sound
d
: the left channel audio is output on both the left and right
speakers.
d
: the right channel audio is output on both the left and right
speakers. MONO.R
MONO.LSTEREO
[SUB]
– –
¡Press during playback.
[AUDIO]
– –¡Press during playback.
[ANGLE]
– –¡Press during playback.
[AUDIO]
– –
Useful FunctionNote:
¡For VCD mode, press the numerical key to enter a number directly. 
¡The on-screen direct operation of the DVD menu is not available in the DVD changer mode. (
a
page 22)
¡If no operation is performed for 8 seconds after you have touched [TITLE], the operation buttons disappear.
¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the number
of the title/chapter entered. 
……
Touch/Press and hold
*
VCDVCDVCDDVDDVDDVD
Showing menu and 
selecting an item
[DVD]
–
–
–[]] [[]
[}] [{]
[]] [[][]] [[]
[}] [{]
d
[ENTER]d
[ENTER]
[RET]
–
–
–
–
–qMenu appears.
wSelect the desired item.
eDetermine the setting.
d
d d dd dReturns to the previous display.
qSelect input mode.
wToggles “Chapter number input mode”
and “Title number input mode”.
eInput desired number.
rPlayback starts.
Starting Playback 
from a specific 
chapter/title
[RET]
–Returns to the previous display.
*Note on VCD:
For VCD, press [RET]
instead of [DVD]
.
[TITLE]
[0] to [9]
[ENTER]
DVDDVDDVD
d
d d
Chapter/title/track SelectionSlow Playback
VCDVCDVCD
DVDDVDDVD
Repeat Play
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
Repeat Play within the
Current Disc
CDCDCD
VCDVCDVCD
Note:
¡Reverse slow playback is not possible.
Scan Play
CDCDCD
Random Play
Random Play within the
Current Folder
MP3MP3MP3
–
[d]–
[REP]
Basic Operations  (continued)
¡Touch/press and hold in the pause
mode.
Playback is at about 1/4 normal speed.
To resume normal playback,
touch/press / [5].To cancel, touch/press again.
To cancel, touch/press and hold for more
than 2 seconds again. –
[REP]
To cancel, touch/press again. –
[SCAN]
To cancel, touch/press again. – –
–
Repeat Play within the
Current Folder
MP3MP3MP3
To cancel, touch/press and hold for more
than 2 seconds again. –
[REP] –
–
CDCDCD
To cancel, touch/press again. –
[RAND] –
–[RAND]
[}]
[
{
]–
–Next disc
Previous disc
Disc Selection
––
–
–d
d d dqActivates input mode.
wInput desired number.
ePlayback starts.
Direct Track Selection
[TITLE][0] to [9]
[ENTER]
MP3MP3MP3
CDCDCD
VCDVCDVCD
Chapter/title/track Selection  (continued)
[RET]
–Returns to the previous display. 
						

							35
CQ-VD7001W
34
CQ-VD7001WSettings
❏MENU Operation
Note
:
¡The display returns to the previous status if there is no operation for more than 60 seconds after changing to the
setting menu. (Example: DVD mode)
Touch  in Operation Screen.
: Press [MENU]
.Touch desired setting.
qw
: Press 
[
}]
, [
{]
, [
]]
or [
[]
to
select, then [ENTER]
to deter-
mine.
(Example: setting screen of DISPLAY UNIT apage 36)
Determines the setting and goes back to the pre-
vious menu out of the menu.
e
: Press [ENTER]
then, press
[MENU]
.
Determines the setting and gets out of the menu
: Press [ENTER]
then, press
[MODE]
.
Preparation: 
To display menu in Chinese, Execute  (Language setting). (
apage 37) 
MENU DISPLAY
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09
PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
MENU
[MENU](Shows the menu screen/
Goes back to the previous menu)
[}] [{] []] [[]
(Select/adjust)
[ENTER] (Determine) [MODE] 
(Exit from the
menu)
[MENU](Goes back to the pre-
vious menu)
[MODE] (Exit from the menu) (Example: DVD mode)[}] [{] []] [[]
(Select/adjust)
[ENTER]
(Determine)
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOL
P·MODE
DISC
OPEN / CLOSE
CQ-VD7001W
TILT
TEXT
TUNE /
TRACK
ENTER
MODE MENU
Menu ButtonTouch for“Menu
Screen” 
						

							ID-CODEID Code SettingPrior to operating this unit, it is advisable to assign a 4-
digit ID code for security. Once the ID code has been set,
the unit cannot be operated if the main power supply is dis-
connected then re-connected. It is electronically locked so
that a thief cannot use the stolen unit unless that person
knows the code you have set.
The ID code operation must be performed only by the per-
son to whom the unit belongs.
Generally, it is not necessary to enter the ID code each
time when using the unit if it has not been disconnected
from the main power supply (car battery).
to  4 digits numeric code
default: none
How to set your ID code (for the first time)
qEnter an 4 digit ID code.
wEnter the same 4 digit ID code again.
How to change your ID code 
qEnter the preset (old) 4 digit ID code. If the wrong ID code
is entered, a new ID code cannot be registered.
wEnter a new 4 digit ID code.
eEnter the new 4 digit ID code again.
How to cancel the known ID code 
qEnter the preset (old) 4 digit ID code. If the wrong ID code
is entered, it is not possible to cancel the ID code function.
wTouch/press and hold 
/[ENTER]
until
“Complete!” is displayed. The ID code cancelling proce-
dure is completed. The unit now works without an ID code.
Note: 
¡Should your unit ever require service, cancel your ID code
before sending for repair.¡The ID code setting cannot be eliminated even by the
memory clear function.¡The inputted code is not displayed for your security.
9
0
MEMORY CLEARMemory clearance
The state of all of the current memories are returned to
default settings.Note: 
¡The ID code is not deleted by executing memory clear.
: no memory clear. 
The display returns to the previous one.
: clears the memory to default settings
default: 
(really?) appears
when is selected.
: no memory clear.
: Proceed.
OK
CANCEL
YES
REALLY?
NO
YESNO
OTHEROther settings
: operation sound (beep) OFF
: operation sound (beep) ON
default: 
: displays the menu in English
: displays the menu in Chinese
default: 
ENGLISH
CHINESEENGLISH
(Language setting)
MENU DISPLAY
ON
ONOFF
(Beep setting)
BEEP
3637
CQ-VD7001W
CQ-VD7001W
Settings 
(continued)
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
DISPLAY UNITDisplay adjustment
(Tilt angle adjustment)
TILT
: the monitor is opened automatically when
turning ON ACC.
: the monitor is not opened automatically.
default: 
Note: 
¡The monitor position setting menu can also be displayed
by pressing the [TILT]button on the display unit for
more than 2 seconds. (apage 17)
MANUAL
MANUALAUTO
(Monitor setting when power on)
OPEN/CLOSE
TOUCH PANELPanel touch position adjustment
Position difference between the touching position and the
displaying symbol position may appear in the following sit-
uations:
1. The display position adjustment is executed.
2. The system is initialized.
3. The power is turned off soon after the touch panel is
adjusted.
For the cases above, readjust the touch panel position.Note: 
¡This function can be performed on the touch panel.
This function is used only when there are some differ-
ences between the touching position and the symbol
position displayed on the monitor.
This function is not used ordinarily.
qSelect  (yes) to proceed.
wTouch the four corners of the touch panel counterclock-
wise.
eTouch  (yes) to reflect. To quit, touch 
(no).
NO
YESYES
Note: 
¡To start the clock, touch/press 
/[MODE]
.
¡Set the Daylight Saving Time manually.
default: HOUR ADJUST: 0
MINUTE ADJUST: 0
5
4
3
2
1
default: 
5
RADIO
INPUT/OUTPUT
DVD
AUDIO
SCREEN
USERCLOCKClock setting
: clock display OFF
: clock display ON (“0:00” is displayed
before adjusting the clock.)
default: 
: puts back hour
: puts forward hour
: puts back minute
: puts forward minute
[]
(Minute adjustment)
MINUTE ADJUST[]
(Hour adjustment)
HOUR ADJUST
OFF
ONOFF
(Clock display)
DISPLAY
rTouch fourtheTouch third
qTouch firstwTouch second
Caution
¡Record your registered ID code and keep it in a secure
location. If you forget it, you will be unable to use the
unit. In case you forget the ID code, please consult
your nearest Panasonic Service Center.
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
1
5
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust
:ID code deletionDetermine: ID code deletion 
						

							: more
: less
: more
: less
: more
: less
Setting range: off, +1 to +10
default: off
][
(Applies to the Sub-woofer)
SUB-W TruBass][
(Applies to the rear speakers)
REAR TruBass][
(Applies  to the front speakers)
FRONT TruBass
(TruBass Setting)
TruBass: more
: less
: more
: less
Setting range: off, + 1 to + 10
default: + 5
][
(Adjusts the SRS effect (center)
on rear speakers)
CENTER TO REAR Mixing][
(Adjusts the SRS effect (front) on
rear speakers)
FRONT TO REAR Mixing
(Adjusts the SRS effect)
Mixing
3839
CQ-VD7001W
CQ-VD7001W
Settings 
(continued)
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
RADIO
INPUT/OUTPUT
DVD
AUDIO
SCREEN
USER
DIMMERAdjusting the brightness
: automatically adjusted according to ambi-
ent light intensity.
default: 
AUTO
4
3
2
1
AUTO
PICTUREDisplay appearance
: decreases the contrast between black and white
: increases the contrast between black and white[]
(Adjust the image contrast)
CONTRAST: darkens
: lightens
[]
(Adjust the image brightness)
BRIGHT: lightens the depth of color on the display
: deepens the depth of color on the display
[]
(Adjust the image color depth)
COLOR: emphasizes red in the color image
: emphasizes green in the color image
Note: 
¡When  is selected for  (VTR terminal setting),
is not adjustable.
TINT
VTR
PAL
[]
(Adjust the image tone or tint)
TINT
RADIO
INPUT/OUTPUT
DVD
AUDIO
SCREEN
USERDarker
Brighter
SRS CS Auto Setting
: activates SRS
: inactivates SRS
default: 
OFF
OFFON
(CS Auto ON/OFF)
CS Auto
: more
: less
: more
: less
: more
: less
Setting range: off, + 1 to + 10
default: off
][
(Raises the central sound image)
CENTER FOCUS][
(Raises the rear sound image)
REAR FOCUS][
(Raises the front sound image)
FRONT FOCUS
(Raises the sound image)
FOCUS
(Customizing the setting)
CUSTOMIZE
Note: 
¡TruBass
TruBass is an audio technology to which the technique of
bass sound reproduction used in pipe organs is electrically
applied, and in which an equalizer is not used at all and
bass sound from the speakers to be used is richly repro-
duced.
Note: 
¡FOCUS
Focus is an audio technology that moves the sound image
of playing sound vertically to reproduce the sounds of
instruments and voices clearly.
GRAPHIC-EQ 
(Graphic-equalizer)
Graphic-equalizer
Six EQ presets are already provided at shipment in this
unit. To
recall a preset memory
, select the correspon-
ding preset buttons 
[1]
to [6]
.
: (Flat) flat frequency response
: (Rock) speedy and heavy sound
: (Pop) wide-ranged and deep sound
: (Vocal) clear sound
: (Jazz) jazz-specific deep sound
: (Club) club and disco-specific sound
You may set your own EQ or modify factory presettings
in each memory button by following the instructions
below:
Adjusting level of each preset
The level of each of the 7 frequency bands can be
adjusted.qSelect the preset number that you prefer to adjust.
wTouch/press 
/[
{][
}]
to adjust each fre-
quency.
eTouch/press the same preset number for more than 2
seconds.
Frequency band
(Hz)
Adjustment range: –12 dB to +12 dB (in 2 dB steps)
Default: ± 0 dB for each band
Note: 
¡The new level adjustment will overwrite the previous
level adjustment.
¡For resuming the factory settings, touch and hold
(7 (initialize)) 
for more than 2 seconds
.
¡Expectable effects vary with the audio format to be used,
settings in the menu, and other factors.
16 k
6k
3k
1k
400
160
60654321
(Display) 
						

							4041
CQ-VD7001W
CQ-VD7001W
Settings 
(continued)
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
LPF/HPF 
(Low Pass Filter/High Pass Filter)
Cut off frequency
: down,    : up
Setting range: 60 Hz to 160 Hz (in 5 Hz step)
default: 100 Hz
: down,    : up
Setting range: off, 90 Hz to 225 Hz  (in 5 Hz step)
default: off
Note: 
¡This setting is not available if 
(SRS setting) is
set to  (on).
¡(High pass filter) is enabled only on the
front speakers (L/R) and rear speakers (L/R).
HPF CUT OFF
ON
CS Auto
[
]
(High Pass Filter)
HPF CUT OFF
[
]
(Sub-woofer Low Pass Filter)
LPF CUT OFF
SP LEVEL 
(Speaker level)
Adjusting the output balance of each speaker
: down,    : up
: down,    : up
: down,    : up
: down,    : up
: down,    : up
: down,    : up
Setting range: –10 dB to +10 dB (1 dB steps)
default: ± 0 dB for all speakers
A test signal (a continuous tone) is output from each
speaker for approximately 2 seconds. 
Adjust the output balance so that the tone appears to have
the same volume from each speaker.
Adjusting the output balance: 
Adjust the volume of all of the other speakers to the volume
level of the speaker from which the test signal appears to be
the quietest.
¡If the speaker setting is  (none) or  (no) for a
speaker, the test signal is not output and that speaker
cannot be selected. 
¡Turn rotary volume controller or 
press [
}]
or [
{]
(
VOL)
to adjust the volume of the test signal.
NO
NONE
[
]
(Subwoofer speaker output bal-
ance)
SUB - W
[
]
(Left surround speaker output
balance)
L¡SURROUND
[
]
(Right surround speaker output
balance)
R¡SURROUND
[
]
(Right front speaker output bal-
ance)
FRONT R
[
]
(Center speaker output balance)
CENTER
[
]
(Left front speaker output bal-
ance)
FRONT L
SP SETUP 
(Speaker set up)
Setting the absence/presence and size of each speaker
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
: for small speakers, or when bass playback is
not possible
default: 
LARGE
SMALLLARGE
(Front speaker setting)
FRONT
: when using a subwoofer
: when not using a subwoofer
default: 
* A subwoofer (option, CJ-HD303N recommended) is
required. A power amplifier (option) is also required for
connecting a subwoofer.
NO
NOYES
(Subwoofer speaker setting)
SUB - W
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
: for small speakers, or when bass playback is
not possible
: when not using a center speaker
default: 
* A center speaker (option, EAB-CF2 recommended) is
required.
NONE
NONESMALLLARGE
(Center speaker setting)
CENTER
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
: for small speakers, or when bass playback is
not possible
: when not using a surround speaker
default: 
LARGE
NONESMALLLARGE
(Surround speaker setting)
SURROUND
(AUDIO continued)Note: 
¡While the private mode is active, only
can be
adjusted.
FRONT
Note: 
¡While the private
mode is active, only
and
can be
adjusted.
FRONT RFRONT L
SP DELAY 
(Speaker delay)
Adjusting the timing with which the audio from each speak-
er reaches the listener’s position
: down,    : upSetting range: 0 ms to 5 ms (1 ms steps)
1 ms = 0.001 seconds
default: 0 ms
: down,    : up
Setting range: 0 ms to 15 ms (1 ms steps)
1 ms = 0.001 seconds
default: 0 ms
¡Make this adjustment while listening to sound.
¡If the speaker setting is 
(none)
for a speaker, that
speaker cannot be selected.
¡
When “PRO LOGIC” is displayed, 15 ms are automatically
added to the delay time setting for the surround speakers.
NONE
[
]
(Surround speaker delay time
setting)
SURROUND
[
]
(Center speaker delay time set-
ting)
CENTER
MODE LEVELSetting the VTR/AUX input levelMake this setting if it is not possible to adjust the volume
through the connected device (on the output side). 
: sets the level low/sound volume increases
: sets the level high/sound volume decreases
default: 
: sets the level low/sound volume increases
: sets the level high/sound volume decreases
Note: 
¡If the input level from VTR/AUX is too high, the audio will
not be output normally.
¡After setting the input level
The volume can be adjusted by pressing [
}]
or [
{]
(VOL)on the remote control or turning rotary volume
controller on the unit.
default: 
HIGH
HIGHLOW
(Setting for AUX)
AUX LEVEL
HIGH
HIGHLOW
(Setting for VTR)
VTR LEVEL