Panasonic Full Hd Display Tc 50lfc70 Operating Instructions

							Model No.
TH-50LFC70U
TH-65LFC70U
TH-80LFC70U
Operating Instructions
FULL HD Display (for business use)
For more detailed instructions, refer to the Operating 
Instructions on the CD-ROM.
Contents
• Important Safety Instructions .....................2• FCC STATEMENT .....................................3• Important Safety Notice .............................4• Safety Precautions .....................................5• Accessories ................................................8• Connections .............................................10• Power On / Off .........................................14• Basic Controls ..........................................16• Speci cations ...........................................19•  Panasonic Professional Flat Panel 
Display Limited Warranty  ........................21
• LIMITED WARRANTY STATEMENT .......22• Customer Service ....................................23
•  Please read these instructions before operating your set and 
retain them for future reference.
•  Illustrations and screens in this Operating Instructions are 
images for illustration purposes, and may be different from 
the actual ones.
•  Descriptive illustrations in this Operating Instructions are 
created mainly based on the 50 inch model.
TQB0AA0054
English
Français
Español 
						

							2
Important Safety Instructions
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
ampli ers) that produce heat.
  9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade 
or the third prong are provided for your safety. If the provided plug does not  t into your outlet, consult an 
electrician for replacement of the obsolete outlet.
  10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 
the point where they exit from the apparatus.
11)  Only use attachments / accessories speci ed by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold 
with the apparatus. When a cart is used, use caution when moving the cart / apparatus 
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged 
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been 
dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to quali ed service personnel.
The lightning flash with 
arrow-head within a triangle 
is in tend ed to tell the user 
that parts inside the product 
are a risk of electric shock 
to per sons.The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the ap pli ance.
CAUTION 
RISK OF ELECTRIC SHOCK 
DO NOT OPEN 
WARNING  : To prevent damage which may result in  re or shock hazard, do not expose this apparatus to 
rain or mois ture.
    Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. 
    (including on shelves above, etc.)
WARNING :  1)  To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing 
to quali ed service personnel.
    2)  Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin 
grounding-type power plug. This plug will only  t a grounding-type power outlet. This is a safety 
fea ture. If you are unable to insert the plug into the outlet, contact an electrician.
      Do not defeat the purpose of the grounding plug. 
						

							3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
FCC CAUTION: 
To assure continued compliance, follow the attached installation instructions and use only shielded 
interface cables when connecting to computer or peripheral devices. Some recommended user provided 
interface cables may require usage of the attached ferrite core kit(s), refer to interface cable connection 
instructions for details. Any changes or modi cations not expressly approved by Panasonic Corp. of 
North America could void the user’s authority to operate this device.
FCC Declaration of Conformity
Model No. TH-50LFC70U, TH-65LFC70U, TH-80LFC70U
 
Responsible Party:  Panasonic Corporation of North America
      Two Riverfront Plaza, Newark, New Jersey 07102-5490
Contact Source:  Panasonic System Communications Company of North America
   1-877-655-2357
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Note:
Image retention may occur. If you display a still picture for an extended period, the image might remain on the 
screen. However, it will disappear after a while.
Trademark Credits
• VGA is a trademark of International Business Machines Corporation.
• Microsoft
®, Windows®, Windows Vista®, and Internet Explorer® are the registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac, Mac OS, OS X and Safari are the trademarks of Apple Inc. registered in the United States and 
other countries.
• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been 
fully respected.
• HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of 
HDMI Licensing LLC in the United States and other countries.
• RoomView, Crestron RoomView and Fusion RV are registered trademarks of Crestron Electronics, Inc, and 
Crestron Connected is the trademark of Crestron Electronics, Inc.
• Miracast is a trademark of Wi-Fi Alliance.
• Android is a registered trademark of Google Inc.
• iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
FCC STATEMENT 
						

							4
Important Safety Notice
WARNING
1)  To prevent damage which may result in  re or shock hazard, do not expose this appliance to dripping 
or splashing.
  Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. (including on 
shelves above, etc.)
 No naked  ame sources, such as lighted candles, should be placed on / above the set. 
2)  To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali ed 
service personnel.
3)  Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type 
power plug. This plug will only  t an earthing-type power outlet. This is a safety feature. If you are unable to 
insert the plug into the outlet, contact an electrician.
  Do not defeat the purpose of the earthing plug.
4)  To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.
CAUTION
This appliance is intended for use in environments which are relatively free of electromagnetic  elds.
Using this appliance near sources of strong electromagnetic  elds or where electrical noise may overlap with the 
input signals could cause the picture and sound to wobble or cause interference such as noise to appear.
To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic  elds. 
						

							5
Safety Precautions
Always be sure to ask a quali ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from 
being played with by young children, creating the potential risk of suffocation.
Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the 
edge of the base.
•  The Display may fall off or tip over.
Do not place any objects on top of the Display.
•  If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in  re 
or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.
Transport only in upright position!
• 
Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table 
cloths and curtains.
For suf cient ventilation;
If using the pedestal (optional accessory), leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 2 3/4” 
(7 cm) or more at the rear, and also keep the space between the bottom of the display and the  oor surface.
If using some other setting-up method, follow the manual of it. (If there is no speci  c indication of installation 
dimension in the installation manual, leave a space of 3 15/16” (10 cm) or more at the top, bottom, left and right, 
and 2 3/4” (7 cm) or more at the rear.)
Cautions for Wall or ceiling Installation
•  Wall or ceiling installation should be performed by an installation professional. Installing the Display incorrectly may 
lead to an accident that results in death or serious injury. Use the speci ed accessories.
• 
If you terminate the use of the Display on the wall or ceiling, ask a professional to remove the Display as soon as possible.•  When mounting the Display on the wall, prevent the mounting screws and power cable from contacting metal objects 
inside the wall. An electric shock may occur if they contact metal objects inside the wall.
Do not install the product to a place where the product is exposed to direct sunlight.
•  If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.
WARNING 
 Setup
This LCD Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
• Pedestal ....................................................................................  TY-ST42P50 (for 50 inch model)*, 
TY-ST65P20 (for 65 inch model and 80 inch model)
• Mobile stand for Display ............................................................  TY-ST50PB2 (for 50 inch model), 
TY-ST65PB2 (for 65 inch model),
TY-ST80LF70 (for 80 inch model)
• Mobile stand ..............................................................................TY-ST58PF20 (for 50 inch model)
• Wall-hanging bracket (vertical) ..................................................  TY-WK42PV20 (for 50 inch model),
TY-WK70PV50 (for 80 inch model)
• Wall-hanging bracket (angled) ..................................................  TY-WK42PR20 (for 50 inch model), 
TY-WK65PR20 (for 65 inch model)
• Ceiling-hanging bracket ............................................................ TY-CE42PS20 (for 50 inch model)
• BNC Dual Video Terminal Board ............................................... TY-FB9BD
• HD-SDI Terminal Board ............................................................. TY-FB9HD
• HD-SDI Terminal Board with audio ........................................... TY-FB10HD
• Dual Link HD-SDI Terminal Board ............................................. TY-FB11DHD
• Dual HDMI Terminal Board ....................................................... TY-FB10HMD
• DVI-D Terminal Board ............................................................... TY-FB11DD
• Digital Interface Box .................................................................. ET-YFB100G
*Precaution for use of TY-ST42P50 (for 50 inch model)
  Use a stand pole “for plasma display (long)” (part number: TBLA3679, TBLA3680).
We are not responsible for any product damage, etc. caused by use of the pedestal, wall-hanging bracket or 
ceiling-hanging bracket made by other companies, or by failures in the installation environment for the pedestal, 
wall-hanging bracket or ceiling-hanging bracket even during the warranty period. 
						

							6
Safety Precautions
 When using the LCD Display
The Display is designed to operate on 110 - 127 V AC, 50/60 Hz.
Do not cover the ventilation holes.
•  Doing so may cause the Display to overheat, which can cause  re or damage to the Display.
Do not stick any foreign objects into the Display.
•  Do not insert any metal or  ammable objects into the ventilations holes or drop them onto the Display, as doing so 
can cause  re or electric shock.
Do not remove the cover or modify it in any way.
•  High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment 
and repair work, please contact your local Panasonic dealer.
Ensure that the mains plug is easily accessible.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing 
connection.
Do not use any power supply cord other than that provided with this unit.
•  Doing so may cause  re or electric shocks.
Securely insert the power supply plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause  re. If the plug is damaged or the wall 
socket is loose, they shall not be used.
Do not handle the power supply plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug 
body, not the cable.
• Do not damage the cable, make any modi cations to it, place heavy objects on top of it, heat it, place it near any 
hot objects, twist it, bend it excessively or pull it. To do so may cause  re and electric shock. If the power cable is 
damaged, have it repaired at your local Panasonic dealer.
Do not remove covers and NEVER modify the Display yourself
• Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts 
inside. (High-voltage components may cause serious electrical shock.) 
• Have the Display checked, adjusted, or repaired at your local Panasonic dealer.
If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from 
the wall outlet.
To prevent the spread of  re, keep candles or other open  ames away from this product at all times.
 If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out 
from the Display, immediately unplug the power supply plug from the wall outlet.
• If you continue to use the Display in this condition,  re or electric shock could result. After checking that the smoke 
has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display 
yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, 
disconnect the power supply plug immediately.
• A short circuit may occur, which could cause  re. Contact your local Panasonic dealer for any repairs that need to 
be made. 
						

							7
Safety Precautions
   CAUTION
 
 When using the LCD Display 
Do not bring your hands, face or objects close to the ventilation holes of the Display.
•  Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, 
or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Display.
•  If the Display is moved while some of the cables are still connected, the cables may become damaged, and  re or 
electric shock could result.
Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any 
cleaning.
•  Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it becoming dusty.
•  If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in  re. 
Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.
Do not burn or breakup batteries.
•  Batteries must not be exposed to excessive heat such as sunshine,  re or the like.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning 
cloth or a soft, lint-free cloth.
•  If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in 
which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until 
the surface is dry.
• Do not scratch or hit the surface of the panel with  ngernails or other hard objects, otherwise the surface may 
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, 
otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been 
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
•  Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside 
the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the 
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods 
in contact with articles made from rubber or PVC.
Usage of a chemical cloth
•  Do not use a chemical cloth for the panel surface.
•  Follow the instructions for the chemical cloth to use it for the cabinet.
Wired LAN
When setting up the Display at a place, where electric statistic occurs often, take a suf cient anti-static 
measure before start using.
• 
When the Display is used at a location, where static electricity occurs often, such as on a carpet, communications 
of the DIGITAL LINK and the wired LAN are disconnected more often. In that case, remove static electricity and the 
noise source that may cause problems with an antistatic mat, and re-connect the DIGITAL LINK and the wired LAN.
• In rare cases, the LAN connection is disabled due to static electricity or noise. In that case, turn off the power of the 
Display and the connected devices once and then re-turn on the power. Connect the DIGITAL LINK and the LAN. 
The Display may not work properly due to strong radiowave from the broadcast station or the radio.
•  If there is any facility or equipment, which outputs strong radiowave, near the installation location, set up the 
Display at a location suf ciently far from the source of the radiowave. Or, wrap the LAN cable connected to the 
DIGITAL LINK terminal by using a piece of metal foil or a metal pipe, of which is grounded at both ends. 
						

							8
Clamper × 1
TMME289 Batteries for the Remote 
Control Transmitter
(R6 (UM3) Size × 2) Remote Control 
Transmitter
N2QAYB000691 Operating 
Instruction book
Check that you have the accessories and items shown
Software CD-ROM × 1
Ferrite core × 2
J0KG00000014
Use the Ferrite cores 
to comply with the EMC 
standard. (see page 9)Cable tie × 2
TMM17499
Power supply cord
Accessories Supply
Accessories
AttentionStore small parts in an appropriate manner, and keep them away from young children.
Contents in the CD-ROM
The contents below are included in the supplied CD-ROM.
Instruction 
(PDF)Operating Instructions - Display Operations
Operating Instructions - Network Operations
Operating Instructions - Wireless Manager ME
Software license GNU GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
Software
Wireless  Manager  ME  (Windows/Mac) Allows the image on the computer screen to be 
sent wirelessly or via wired LAN.
Switch the input to Panasonic APPLICATION 
before use. For more details, see the instruction 
manual of Wireless Manager ME. 
						

							9
+-+
-
Remote Control Batteries
Requires two R6 batteries.
1. Pull and hold the hook, then open 
the battery cover.2. Insert batteries - note correct 
polarity (+ and -).3. Replace the cover.
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline 
batteries for longer life.
   Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. 
Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.6. Do not burn or breakup batteries.
7. Batteries must not be exposed to excessive heat such as sunshine,  re or the like. “R6 (UM3)” size
Accessories
How to use the Ferrite core
Stereo mini plug (M3) PC with DVI-D 
video out
Shared with PC IN.
Less than 
1.97 inch (5 cm)Ferrite core 
(supplied)
DVI-video cable (Within 5 m)Less than 
1.97 inch (5 cm)
Installing the Ferrite core
Pull back the tabs
(in two places)1.Open the 
Ferrite core 2.Route the 
cable through 
and close
3.
Fix the Ferrite 
core with the 
cable tie 4. 
						

							10
Connections
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on 
both the left and right sides.
AC cord  xing
Unplug the AC cord
Unplug the AC cord pressing the 
two knobs.
Note:
When disconnecting the AC cord, be 
absolutely sure to disconnect the AC 
cord plug at the socket outlet  rst.
1 2Attach the clamperTo remove from the unit:
Keep pushing 
both side snaps holeBundle the cables
snaps
hooksSet the
tip in the
hooksTo loosen:
Keep
pushing
the knob knob Insert the clamper 
in a hole.
AC cord connection and  xing, cable  xing
When using the Wall-hanging bracket (vertical) (for 50 inch model)
Note:
When using the Wall-hanging bracket (vertical) (TY-WK42PV20), use the holes 
 and  to secure the cables. If the 
clamper is used on the hole , the cables may be caught by the wall-hanging bracket.
50 inch model
For 50 inch and 65 inch models
65 inch model
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
If you need more clampers, purchase them from your dealer. (Available from the customer service)