Panasonic Full Hd Display Tc 50lfc70 Operating Instructions
Have a look at the manual Panasonic Full Hd Display Tc 50lfc70 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 Connections For 80 inch model Plug the AC cord into the display unit. Plug the AC cord until it clicks. Note: Make sure that the AC cord is locked on both the left and right sides. AC cord xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet rst. Using the clamper Secure any excess cables with clamper as required. Note: One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately. If you need more clampers, purchase them from your dealer. (Available from the customer service) 1 2Attach the clamperTo remove from the unit: Keep pushing both side snaps holeBundle the cables snaps hooksSet the tip in the hooksTo loosen: Keep pushing the knob knob Insert the clamper in a hole.
12 Video equipment connection Connections Speaker connection Red BlackRed Black 1 While pressing the lever, insert the core wire.2 Return the lever. * DIGITAL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables. For details, see the Operating Instructions - “Network Operations”. SLOT: Terminal board (optional accessories) insert slot (see page 5)Note:The right side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the right side slot. AUDIO 1 IN: Audio input terminal shared with VIDEO and COMPONENT/ RGB IN. PC IN: PC Input Terminal Connect to video terminal of PC or equipment with Y, P B(CB) and PR(CR) output.DVI-D IN: DVI-D Input Terminal LAN, DIGITAL LINK*Connect to a DIGITAL LINK input terminal network to control the Display. Alternatively, connect to a device that sends video and audio signals via the DIGITAL LINK terminal. SERIAL: Serial Control Terminal. Control the Display by connecting to PC. AV IN (VIDEO): Composite Video Input Terminal COMPONENT/RGB IN: Component/ RGB Video Input Terminal AV IN (HDMI 1, HDMI 2): HDMI Input Terminal Connect to video equipment such as VCR or DVD player. AUDIO 2 IN: Audio input terminal shared with DVI-D IN and PC IN.PC OUT: Monitor Out Terminal. Video signals being reproduced on the display are output to another sub monitor as PC video signals. For 50 inch and 65 inch models Please use 8 /10 W speaker.
13 Connections AUDIO 1 IN: Audio input terminal shared with VIDEO and COMPONENT/ RGB IN. PC IN: PC Input Terminal Connect to video terminal of PC or equipment with Y, P B(CB) and PR(CR) output. DVI-D IN: DVI-D Input Terminal LAN, DIGITAL LINK* Connect to a DIGITAL LINK input terminal network to control the Display. Alternatively, connect to a device that sends video and audio signals via the DIGITAL LINK terminal. SERIAL: Serial Control Terminal. Control the Display by connecting to PC.AV IN (VIDEO): Composite Video Input Terminal COMPONENT/RGB IN: Component/RGB Video Input Terminal * DIGITAL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables. For details, see the Operating Instructions - “Network Operations”. AV IN (HDMI 1, HDMI 2): HDMI Input Terminal Connect to video equipment such as VCR or DVD player.AUDIO 2 IN: Audio input terminal shared with DVI-D IN and PC IN. PC OUT: Monitor Out Terminal. Video signals being reproduced on the display are output to another sub monitor as PC video signals. SLOT: Terminal board (optional accessories) insert slot (see page 5) Note: The upper side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the upper side slot. For 80 inch model
14 Power On / Off Press the button on the remote control to turn the Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Display on. Power Indicator: Green Turn the power to the Display off by pressing the switch on the unit, when the Display is on or in standby mode. Note: During operation of the power management function, the power indicator turns orange in the power off state. Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type tted to your set. • When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet rst. Press the Power switch on the Display to turn the set on: Power-On. Power Indicator: Green [Starting up the network] It takes some time for the network to start up just after the power is turned on. During that time, “Network Setup” in the “Setup” menu is grayed out and cannot be set. Connecting the AC cord plug to the Display. Power switch Power Indicator Remote Control Sensor
SetDayMON18:00Time Day/Time SettingsTime MON 99:99 SetDayTUE 18:00 Time Day/Time SettingsTime TUE 99:99 OSD LanguageEnglish (UK)Deutsch Français ItalianoEspañolENGLISH (US) Panasonic APPLICATION S-DIRECT Name1234 Proj1234 Wireless LAN network numberDisplay nameDisplay ID Displaying network information The network information for the Display will be displayed in the following scenarios. The power is turned ON with Panasonic APPLICATION selected as the input. The input is switched to Panasonic APPLICATION. The button is pushed with Panasonic APPLICATION selected as the input. Display example: 15 Power On / Off When rst switching on the unit Following screen will be displayed when the unit is turned on for the rst time. Select the items with the remote control. Unit buttons are invalid. Notes: • Once the items are set, the screens won't be displayed when switching on the unit next time. • After the setting, the items can be changed in the following menus. OSD Language Day/Time Settings Power ON message The following message may be displayed when turning the unit power ON: No activity power off Precautions ’No activity power off’ is enabled. If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time the power is turned ON. Power Management Information Last turn off due to 'Power management'. If “Power management” is functioned, an information message is displayed every time the power is turned ON. These message displays can be set with the following menu: Options menu Power On Message (No activity power off) Power On Message (Power Management) OSD Language Day/Time Settings 1 Select the language. 2 Set. 1 Select “Day” or “Time”. 2 Setup “Day” or “Time”. 1 Select “Set”. 2 Set.
16 INPUTMENU VOL ENTER/ +/ -/ Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down Remote control sensor Main Power On / Off SwitchBrightness Sensor Detects the brightness in the viewing environment. Main Unit Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ........ Red Orange (When “Slot power” is set to “On” and Terminal Board is installed.) Orange (Depending on the type of the function board installed, when the power is supplied to the slot) Orange (When “Control I/F Select” is set to “DIGITAL LINK/LAN” or “Wireless Network Standby” is set to “On”. Refer to “Operating Instructions, Network Operations”) • Power-ON ...... Green • HDMI1 Power management HDMI2 Power management ......................... Orange (With HDMI1 or HDMI2 input signal.) • PC Power management (DPMS) ......................... Orange (With PC input signal.) • DVI-D Power management ......................... Orange (With DVI input signal.) Note: If the power indicator is orange, power consumption during standby is generally larger than that of when the power indicator is red. Enter / Aspect button INPUT button (INPUT signal selection) SLOT: Terminal board (optional accessories) insert slot (see page 5) Note: The right side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the right side slot. USB (VIEWER): Connect to USB memory. For 50 inch and 65 inch models
17 INPUTMENU VOL ENTER/ +/ -/ Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down Remote control sensor Main Power On / Off SwitchBrightness Sensor Detects the brightness in the viewing environment. For 80 inch model Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ........ Red Orange (When “Slot power” is set to “On” and Terminal Board is installed.) Orange (Depending on the type of the function board installed, when the power is supplied to the slot) Orange (When “Control I/F Select” is set to “DIGITAL LINK/LAN” or “Wireless Network Standby” is set to “On”. Refer to “Operating Instructions, Network Operations”) • Power-ON ...... Green • HDMI1 Power management HDMI2 Power management ......................... Orange (With HDMI1 or HDMI2 input signal.) • PC Power management (DPMS) ......................... Orange (With PC input signal.) • DVI-D Power management ......................... Orange (With DVI input signal.) Note: If the power indicator is orange, power consumption during standby is generally larger than that of when the power indicator is red. Enter / Aspect button INPUT button (INPUT signal selection) SLOT: Terminal board (optional accessories) insert slot (see page 5) Note: The upper side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the upper side slot. USB (VIEWER): Connect to USB memory.
18 Basic Controls Remote Control Transmitter Digital Zoom 1 2PC4:3 COMPONENTMemory name: MEMORY2 Off timer90min3410:00 Standby (ON / OFF) buttonThe Display must rst be plugged into the wall outlet and turned on at the power switch (see page 14). Press this button to turn the Display On, from Standby mode. Press it again to turn the Display Off to Standby mode. ACTION button Press to make selections. ASPECT button Press to adjust the aspect. POS./SIZE button PICTURE button Sound mute On / Off Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. N button POSITION buttons INPUT button Press to select Input signal sequentially. ECO MODE (ECO) Press to change the ECO MODE setup status. FUNCTION buttons (FUNCTION)AUTO SETUP button Automatically adjusts the position/ size of the screen. SET UP button SOUND button Volume Adjustment Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level. R button Press the R button to return to previous menu screen. OFF TIMER button The Display can be preset to switch to stand-by after a xed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 min 60 min 0 min (Cancel)90 min When three minutes remain, “Off timer 3 min” will ash. The off timer is cancelled if a power interruption occurs. RECALL buttonPress the “RECALL” button to display the current system status. 1 Input label2 Aspect mode Audio input Pro le name 3 Off timer The off timer indicator is displayed only when the off timer has been set. 4 Clock display
19 Speci cations TH-50LFC70U TH-65LFC70U Power Source 110 - 127 V AC, 50/60 Hz Power Consumption Power on 135 W 210 W Stand-by condition 0.5 W Power off condition 0.3 W LCD Display panel50-inch VA panel (LED backlight), 16:9 aspect ratio65-inch VA panel (LED backlight), 16:9 aspect ratio Screen size43.1” (W) × 24.2” (H) × 49.5” (diagonal) / 1,095 mm (W) × 616 mm (H) × 1,257 mm (diagonal)56.2” (W) × 31.6” (H) × 64.5” (diagonal) / 1,428 mm (W) × 803 mm (H) × 1,638 mm (diagonal) (No.of pixels) 2,073,600 (1,920 (W) ×1,080 (H)) [5,760 × 1,080 dots] Operating condition Temperature 32 °F - 104 °F (0 °C - 40 °C) Humidity 20 % - 80 % (no condensation) Applicable signals Colour System NTSC, PAL, PAL60, SECAM, Modi ed NTSC Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p · 24p · 25p · 30p · 24psF, 1250 (1080) / 50i PC signals VGA, SVGA, XGA, SXGA UXGA ···· (compressed) Horizontal scanning frequency 15 - 110 kHz Vertical scanning frequency 48 - 120 Hz Connection terminals AV IN VIDEO AUDIO 1 INBNC Stereo mini jack (M3) × 11.0 Vp-p (75 ) 0.5 Vrms, Shared with COMPONENT/RGB IN HDMI 1 HDMI 2TYPE A Connector × 2 COMPONENT/RGB IN Y/G P B/CB/B PR/CR/R AUDIO 1 INBNC BNC BNC Stereo mini jack (M3) × 1with sync 1.0 Vp-p (75 ) 0.7 Vp-p (75 ) 0.7 Vp-p (75 ) 0.5 Vrms, Shared with VIDEO DVI-D IN AUDIO 2 INDVI-D 24 Pin Content Protection Stereo mini jack (M3) × 1Compliance with DVI Revision 1.0 Compatible with HDCP 1.1 0.5 Vrms, Shared with PC IN PC IN AUDIO 2 INHigh-Density Mini D-sub 15 Pin Stereo mini jack (M3) × 1Y or G with sync 1.0 Vp-p (75 ) Y or G without sync 0.7 Vp-p (75 ) P B/CB/B: 0.7 Vp-p (75 ) PR/CR/R: 0.7 Vp-p (75 ) HD/VD: 1.0 - 5.0 Vp-p (high impedance) 0.5 Vrms, Shared with DVI-D IN SERIAL External Control Terminal D-sub 9 Pin RS-232C compatible PC OUT R: 0.7 Vp-p (75 ) G: 0.7 Vp-p (75 ) B: 0.7 Vp-p (75 ) HD/VD: 1.0 - 5.0 Vp-p USB (VIEWER) TYPE A USB connector DIGITAL LINK / LAN For RJ45 network and DIGITAL LINK connections, compatible with PJLink™ Communication method: RJ45 100BASE-TX EXT SP 8 , 20 W [10 W + 10 W] (10 % THD) Sound Speakers 120 mm × 40 mm × 2 pcs Audio Output 20 W [10 W + 10 W] (10 % THD) Dimensions (W × H × D)45.4” × 26.5” × 3.7” / 1,151 mm × 672 mm × 94 mm58.5” × 33.8” × 3.9” / 1,484 mm × 859 mm × 97 mm Mass (weight)approx. 66.2 lbs / 30.0 kg net approx. 121.3 lbs / 55.0 kg net
20 Speci cations TH-80LFC70U Power Source 110 - 127 V AC, 50/60 Hz Power Consumption Power on 345 W Stand-by condition 0.5 W Power off condition 0.3 W LCD Display panel80-inch VA panel (LED backlight), 16:9 aspect ratio Screen size69.7” (W) × 39.2” (H) × 80.0” (diagonal) / 1,771 mm (W) × 996 mm (H) × 2,032 mm (diagonal) (No.of pixels) 2,073,600 (1,920 (W) ×1,080 (H)) [5,760 × 1,080 dots] Operating condition Temperature 32 °F - 104 °F (0 °C - 40 °C) Humidity 20 % - 80 % (no condensation) Applicable signals Colour System NTSC, PAL, PAL60, SECAM, Modi ed NTSC Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p · 24p · 25p · 30p · 24psF, 1250 (1080) / 50i PC signals VGA, SVGA, XGA, SXGA UXGA ···· (compressed) Horizontal scanning frequency 15 - 110 kHz Vertical scanning frequency 48 - 120 Hz Connection terminals AV IN VIDEO AUDIO 1 INBNC Stereo mini jack (M3) × 11.0 Vp-p (75 ) 0.5 Vrms, Shared with COMPONENT/RGB IN HDMI 1 HDMI 2TYPE A Connector × 2 COMPONENT/RGB IN Y/G P B/CB/B PR/CR/R AUDIO 1 INBNC BNC BNC Stereo mini jack (M3) × 1with sync 1.0 Vp-p (75 ) 0.7 Vp-p (75 ) 0.7 Vp-p (75 ) 0.5 Vrms, Shared with VIDEO DVI-D IN AUDIO 2 INDVI-D 24 Pin Content Protection Stereo mini jack (M3) × 1Compliance with DVI Revision 1.0 Compatible with HDCP 1.1 0.5 Vrms, Shared with PC IN PC IN AUDIO 2 INHigh-Density Mini D-sub 15 Pin Stereo mini jack (M3) × 1Y or G with sync 1.0 Vp-p (75 ) Y or G without sync 0.7 Vp-p (75 ) P B/CB/B: 0.7 Vp-p (75 ) PR/CR/R: 0.7 Vp-p (75 ) HD/VD: 1.0 - 5.0 Vp-p (high impedance) 0.5 Vrms, Shared with DVI-D IN SERIAL External Control Terminal D-sub 9 Pin RS-232C compatible PC OUT R: 0.7 Vp-p (75 ) G: 0.7 Vp-p (75 ) B: 0.7 Vp-p (75 ) HD/VD: 1.0 - 5.0 Vp-p USB (VIEWER) TYPE A USB connector DIGITAL LINK / LAN For RJ45 network and DIGITAL LINK connections, compatible with PJLink™ Communication method: RJ45 100BASE-TX EXT SP 8 , 20 W [10 W + 10 W] (10 % THD) Sound Speakers 120 mm × 40 mm × 2 pcs Audio Output 20 W [10 W + 10 W] (10 % THD) Dimensions (W × H × D)73.6” × 43.1” × 3.9” / 1,868 mm × 1,093 mm × 99 mm Mass (weight)approx. 183.0 lbs / 83.0 kg net Note: Design and speci cations are subject to change without notice. Mass and dimensions shown are approximate.