Panasonic Hdc Hs100 Operating Instructions

							111VQT1T93
Preparation
Recording
Playback
Backup
With a PC
Others
11 2Before using
11 7Setup
121Using with a PC
HDCHS100P-VQT1T93_ENG.book  111 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							112VQT1T93
Before using
1
What you can do with a PC
Software requiredAvailable functionData type
CD-ROM (supplied):
HD Writer 2.6E for HDC
*1Copying data to a PC:
AMotion/Still pictures
1Built-in HDD
Motion 
picture and 
still picture Copying in 
AVCHD format
*2:
AMotion/Still 
pictures
BMotion pictures
1Built-in HDD
Copying in DVD-
Video format
*3:
BMotion 
pictures
1Built-in HDD
≥Converted to 
conventional standard quality (MPEG2 format).
Motion 
picture Easy editing:
Editing motion picture data copied on an HDD of a PC
≥Split, merge, delete
≥Converting the motion picture data to MPEG2
≥Converting part of motion picture into still picture
Playing back on a PC:
Play back the motion picture data in high definition 
picture quality on a PC.
Formatting discs:
Depending on the type of disc that you use, formatting 
is necessary. Discs are formatted using the UDF 2.5 file 
system that supports the AVCHD format.





 
HDCHS100P-VQT1T93_ENG.book  112 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							11 3VQT1T93
*1 Refer to the operating instructions of HD Writer 2.6E (PDF file) for details on how to use it.
*2 Compatible media are SD card and discs (DVD-RAM, DVD-RW, DVD-R and DVD-R DL).
*3 Compatible media are discs (DVD-RW, DVD-R and DVD-R DL).
≥It is impossible to write data to the built-in HDD on this unit from a PC.
≥We cannot guarantee operation if you use software other than that supplied to read/write motion 
picture.
≥Do not start the software supplied with this unit and other software at the same time. Close any other 
software if you start the software supplied with this unit and close the software supplied with this unit 
if you start any other software.
≥Be sure to use the supplied USB cable when connecting this unit and a PC. (Operation is not 
guaranteed with any other USB cables.)
∫To use the HD Writer 2.6E
You will need a high performance PC depending on the functions to be used. It may not properly play 
back or properly operate depending on the environment of the PC used. Refer to the operating 
environment and notes on page 115.
≥Operation during the playback may become slow if the CPU or memory is not fulfilling the 
requirements of the operating environment.
≥Always use the most current driver for the video card.
≥Always make sure there is enough capacity on the HDD in the PC. It may become inoperable or the 
operation may stop suddenly if the capacity gets low.
Software requiredAvailable functionData type
Standard Windows picture 
viewer or a commercially 
available picture viewerPlaying back on a PC
Still picture
Windows Explorer Copying still pictures to a PC (l120)
Refer to page 122 if using a Macintosh.
Important Notice
≥Do not insert a disc recorded in AVCHD format with HD Writer 2.6E in a device that does not 
support the AVCHD format. In some cases the disc may get stuck in the device. The disc 
will not play back on devices that do not support the AVCHD format.
≥When inserting a disc containing recorded motion pictures into other devices, a message 
prompting you to format the disc may be displayed. Do not format the disc, since deleted 
data cannot be restored later.
HDCHS100P-VQT1T93_ENG.book  113 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							114VQT1T93
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for the 
Software defined in this End User Software 
Agreement (“Agreement”) on condition that you 
agree to the terms and conditions of this 
Agreement. If Licensee does not agree to the 
terms and conditions of this Agreement, promptly 
return the Software to Matsushita Electric 
Industrial Co., Ltd. (“Matsushita”), its distributors 
or dealers from which you made the purchase.
Article 1 License
Licensee is granted the right to use the software, 
including the information recorded or described 
on the CD-ROM, instruction manuals, and any 
other media provided to Licensee (collectively 
“Software”), but all applicable rights to patents, 
copyrights, trademarks and trade secrets in the 
Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer or 
allow any third party, whether free of charge or 
not, to use, copy or modify the Software, except 
as expressly provided for in this Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the 
Software in whole or in part solely for back-up 
purposes.
Article 4 PC
Licensee may only use the Software on a single 
PC at a single location.
Article 5 Reverse Engineering, Decompiling or 
Disassembly
Licensee may not reverse engineer, decompile, 
or disassemble the Software, except to the 
extent either of them is permitted under law or 
regulation of the country where Licensee resides. 
Matsushita, or its distributors or dealers will not 
be responsible for any defects in the Software or 
damage to Licensee caused by Licensee’s 
reverse engineering, decompiling, or 
disassembly of the Software.Article 6 Limitation of Liability
The Software is provided “AS-IS” without 
warranty of any kind, either expressed or implied, 
including, but not limited to, warranties of non-
infringement, merchantability and/or fitness for a 
particular purpose. Further, Matsushita does not 
warrant that the operation of the Software will be 
uninterrupted or error free. Matsushita or any of 
its distributors or dealers will not be liable for any 
damage suffered by Licensee arising from or in 
connection with Licensee’s use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to any 
country the Software in any form without the 
appropriate export licenses under regulations of 
the country where Licensee resides, if 
necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be 
automatically terminated if Licensee violates any 
of the terms and conditions of this Agreement. 
Upon such automatic termination, Licensee must 
destroy the Software and related documentation 
together with all the copies thereof at Licensee’s 
own expense.
End User License Agreement
HDCHS100P-VQT1T93_ENG.book  114 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							11 5VQT1T93
Before using
2
Operating environment
≥Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs 
cannot be used.
≥A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer 
drive and media are necessary for writing to a DVD.)
≥Operation is not guaranteed in the following cases.
jWhen 2 or more USB devices are connected to a PC, or when devices are connected through USB 
hubs or by using extension cables.
jOperation on an upgraded OS.
jOperation on an OS other than the one pre-installed.
≥This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98, 
Windows 98SE, Windows Me and Windows NT.
∫Operating environment for HD Writer 2.6E for HDC
PCIBM PC/AT compatible PC
OSMicrosoft Windows 2000 Professional Service Pack 4
Microsoft Windows XP Home Edition Service Pack 2/Service Pack 3
Microsoft Windows XP Professional Service Pack 2/Service Pack 3
Microsoft Windows Vista Home Basic or Service Pack 1
Microsoft Windows Vista Home Premium or Service Pack 1
Microsoft Windows Vista Ultimate or Service Pack 1
Microsoft Windows Vista Business or Service Pack 1
CPUIntel PentiumIII 1.0 GHz or higher (including compatible CPU)
≥Intel Core 2 Duo 2.16 GHz or higher, Intel Pentium D 3.2 GHz or higher 
or AMD Athlon
™64 X2 Dual-Core 5200+ or higher is recommended 
when a playback function or MPEG2 output function is used.
≥Intel Core 2 Quad 2.6 GHz or higher is recommended when using the 
seamless conversion function.
RAMWindows Vista: 1024 MB or more
Windows XP/2000: 512 MB or more (1024 MB or more recommended)
DisplayHigh Color (16 bit) or more (32 bit or more recommended)
Desktop resolution of 1024k768 pixels or more (1280k1024 pixels or 
more recommended)
Windows Vista: DirectX 10 compatible video card
Windows XP/2000: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express
™k16 compatible recommended
Free hard disk drive 
spaceUltra DMA — 100 or more
300 MB or more (for installing the application)
≥When writing to a DVD, more than double the amount of free space as 
the disc being created is necessary.
HDCHS100P-VQT1T93_ENG.book  115 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							116VQT1T93
≥Supplied CD-ROM is available for Windows only.
≥Input is not supported in languages other than English, German, French and Simplified Chinese.
≥Operation cannot be guaranteed on all DVD drives.
≥Operation is not guaranteed on Microsoft Windows Vista Enterprise, Windows XP 
Media Center Edition, Tablet PC Edition and not compatible with 64 bit operation systems.
≥This software is not compatible with a multi-boot environment.
≥This software is not compatible with a multi-monitor environment.
≥If using Windows XP/2000, an administrative account user only can use this software. If using 
Windows Vista, administrative account and standard account users only can use this software. (An 
administrative account user should install and uninstall this software.)
∫Operating environment for the card reader function (mass storage)
≥The USB equipment operates with the driver installed as standard in the OS.
Necessary softwareWindows Vista: DirectX 10
Windows XP/2000: DirectX 9.0c
≥If you install the software on a PC that is not compatible with 
DirectX 9.0c, the PC may not work properly. If you are unsure whether 
or not your PC is compatible, contact the maker of your PC.
SoundDirectSound Support
InterfaceUSB port [Hi-Speed USB (USB 2.0)]
Other requirementsMouse or equivalent pointing device
PCIBM PC/AT compatible PC
OSMicrosoft Windows 2000 Professional Service Pack 4
Microsoft Windows XP Home Edition Service Pack 2/Service Pack 3
Microsoft Windows XP Professional Service Pack 2/Service Pack 3
Microsoft Windows Vista Home Basic or Service Pack 1
Microsoft Windows Vista Home Premium or Service Pack 1
Microsoft Windows Vista Ultimate or Service Pack 1
Microsoft Windows Vista Business or Service Pack 1
Microsoft Windows Vista Enterprise or Service Pack 1
CPUWindows Vista: 32-bit (k86) Intel PentiumIII 1.0 GHz or higher processor
Windows XP/2000: Intel PentiumIII 450 MHz or higher or Intel Celeron 
400 MHz or higher
RAMWindows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Ultimate/Business/Enterprise:
1GB or more
Windows XP/2000: 128 MB or more (256 MB or more recommended)
InterfaceUSB port
Other requirementsMouse or equivalent pointing device
HDCHS100P-VQT1T93_ENG.book  116 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							11 7VQT1T93
Setup
1
Installation
When installing the software, log on to your PC as the Administrator (or with a user name with 
equivalent authorization) or with the user name for a standard user account. (If you do not have 
authorization to do this, consult your manager.)
≥Before starting the installation, close all applications that are running.
≥Do not perform any other operations on your PC while the software is being installed.
1Insert the CD-ROM into the PC.
≥If the installation screen does not appear 
automatically, double-click the CD-ROM drive 
icon in [My Computer (Computer)].
2Click [Next].
3Read the [End User License 
Agreement], then place a check 
beside [I accept the terms of the 
license agreement] if you agree 
to them and click [Next].
≥If you do not agree to the terms and conditions 
of the License Agreement, installation is not 
possible.
4Continue to follow the on-screen 
messages to install HD Writer 
2.6E.
≥If using Windows 2000, Microsoft DirectX 9.0c 
must be installed in order to operate HD Writer 
2.6E.
Depending on the operating environment, you 
may be required to install DirectX 9.0c. Click 
[Yes] to install it.
If you install the software on a PC that is not 
compatible with DirectX 9.0c, the PC may not 
work properly. If you are unsure whether or not 
your PC is compatible, contact the PC 
manufacturer.
HDCHS100P-VQT1T93_ENG.book  117 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							118VQT1T93
5After the installation is complete, restrictions 
are displayed.
Check the contents, then close 
the window.
6Click [Finish].
∫Uninstalling HD Writer 2.6E
Follow the steps below to uninstall any software applications that you no longer require.
1Select [start] # ([Settings] #) 
[Control Panel] # 
[Add or Remove Programs 
(Applications)] or [Uninstall a 
program].2Select [HD Writer 2.6E for HDC], 
then click [Change/Remove] 
([Change or Remove] or [Add/
Remove]) or [Uninstall].
≥Proceed with the uninstallation by following the 
on-screen instructions.
≥After uninstalling the software, be sure to 
reboot the PC.
The PC must be rebooted for the 
application to work.
HDCHS100P-VQT1T93_ENG.book  118 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							11 9VQT1T93
Setup
2
Connection and recognition
After the software applications are installed, this unit must be connected to the PC and be correctly 
recognized by the PC.
≥Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
1Connect this unit to the AC 
adaptor.
2Turn on the unit.
≥This function is available in all modes.
3Connect this unit to a PC.
The USB function selection screen will appear.
≥
Insert the USB connectors as far as they will go.≥Do not use any other USB connection cables 
except the supplied one. (Operation is not 
guaranteed with any other USB cables.)
4Select [PC CONNECT] and press 
the cursor button.
≥This unit is automatically detected by the PC.
≥[AVCHD CONNECT] is for future expansion 
menu.
≥When the unit is connected to a PC, the 
operation mode cannot be changed and its 
power cannot be turned off.
Disconnect the USB cable, before turning 
this unit off.≥Do not disconnect the USB cable or the AC 
adaptor while the card access lamp is on or 
card access icon ( ) appears on the unit 
screen. Doing so may damage the data.
≥Do not disconnect the USB cable or the AC 
adaptor while the HDD access lamp is on or 
HDD access icon ( ) appears on the unit 
screen. Doing so may damage the data.
∫If the driver has not been 
recognized properly
Use the following methods to enable it to be 
recognized.
Method 1:
Turn off the unit and your PC once and try 
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on 
your PC.
∫To disconnect USB cable safely
1 Double click the   ( ) icon in task 
tray displayed on the PC.
≥Depending on your PC’s settings, this icon 
may not be displayed.
2 Select [USB Mass Storage Device] and 
click [Stop].
3 Verify [MATSHITA HDC-HS100/HDD USB 
Device] or [MATSHITA HDC-HS100/SD 
USB Device] is selected and click [OK].
HDCHS100P-VQT1T93_ENG.book  119 ページ  ２００８年７月１４日　月曜日　午後１時３６分 
						

							120VQT1T93
When the unit is connected to a PC, it is recognized as an external drive.
≥[Removable Disk] (Example:  ) is displayed in [My Computer (Computer)].
Example folder structure of an SD card:
Example folder structure of HDD:1Up to 999 still pictures in JPEG format
* 
can be stored. ([IMGA0001.JPG] etc.)
2Still pictures are stored in JPEG format* 
when recorded in HD hi-speed burst 
shooting mode.
3JPEG format still picture* created from 
the motion picture will be recorded.
* These can be opened with picture software 
that supports JPEG pictures.
4The DPOF setting files are recorded.
5The motion picture thumbnails are 
recorded.
6AVCHD format motion picture files are 
saved. ([00000.MTS] etc.)
7Files for intelligent scene selection 
playback are recorded.
∫Copying your still pictures to 
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be 
copied to the PC with Explorer or other 
programs.
1 Connect this unit to the PC and then 
select [PC CONNECT].
2 Double click the folder that contains the 
still pictures on the removable disk 
([DCIM] # [100CDPFQ] etc.).
3 Drag and drop the still pictures onto the 
destination folder (on the PC’s HDD).
≥Do not delete the SD card’s folders. Doing so 
may make the SD card unuseable in this unit.
≥When data not supported by this unit has been 
recorded on a PC, it will not be recognized by 
this unit.
≥Always use this unit to format SD cards.
About the PC display
We recommend using HD Writer 2.6E to copy 
or write back motion picture data recorded on 
an SD card.
Using Windows Explorer or other programs on 
the PC to copy, move or rename files and 
folders recorded with this unit will result in 
them being unusable with HD Writer 2.6E.
We recommend using HD Writer 2.6E to copy 
motion picture data recorded on the HDD.
It is impossible to write data to the built-in 
HDD on this unit from a PC.
Removable Disk
AVCHDTN
BDMV
DCIM
100CDPFQ
AVCHD
MISC
P R I VAT E
101CDPFR
IISVPL
102CDPFS

Removable Disk
AVCHDTN
BDMV
DCIM
100CDPFQ
101CDPFR
AVCHD MISC
IISVPL
102CDPFS

HDCHS100P-VQT1T93_ENG.book  120 ページ  ２００８年７月１４日　月曜日　午後１時３６分