Panasonic Hdc Sd60 Operating Instructions

							41VQT2M51
4Touch the scene or the still picture to be 
played back.
≥Next (previous) page can be displayed by touching 
/.
5Select the playback operation by touching the operation icon.
A Operation icon
≥ Touch 
/ to display/not-display the operation 
icon.
Motion picture playbackStill picture playback
1/ ;: Playback/Pause
6 : Rewind playback
5 : Fast forward playback
∫ : Stops the playback and shows 
the thumbnails.
1: Displays the direct playback 
bar. (l79) 1/
;: Slide show (playback of the still 
pictures in numerical order) 
start/pause.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫ : Stops the playback and shows 
the thumbnails.
F
0h00m00s 0h00m00s
0h00m00s

FF
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  41 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							42VQT2M51
∫Change the thumbnail display
While the thumbnail is displayed, the 
thumbnail display changes in the following 
order if the zoom lever or adjust zoom 
buttons are operated to   side or   side.
20 scenes  () 9 scenes  () 1 scene
()  Highlight&Time frame index* ( l80)
* Highlight&Time frame index can only set  in Motion Picture Playback Mode.
≥ 9 scenes display returns if the power is 
turned off or the mode is changed.
≥ When the thumbnail display is changed to 
1 scene during motion picture playback, 
the recording date and time can be 
checked. Similarly, when the thumbnail 
display is changed to 1 still picture during 
still picture playback, the recording date 
and file number can be checked.
∫ Speaker volume adjustment
Operate the volume lever or the adjust zoom 
buttons to adjust the speaker volume during 
motion picture playback.
To w a r d s  “ r”:
Increases the volume
To w a r d s  “ s”:
Decreases the volume
≥ Sound will be heard only during normal 
playback.
≥ If pause play is continued for 5 minutes, 
the screen returns to the thumbnails.
≥ The elapsed time for playback indication 
will be reset to “0h00m00s” for each 
scene.
0ø0õ
0÷0ð0í
TW0÷0ð0í0ø0õ
0÷0ð0í
TW0÷0ð0í
Motion picture compatibility≥This unit is based on the AVCHD format.
≥ The video signal that can be played back on this unit is 1920 k1080/60i, 1920 k1080/
24p or 1440k 1080/60i.
≥ This unit may degrade or not play back motion pictures recorded or created on other 
products, and other products may degrade or not play back motion pictures recorded on 
this unit, even if the products support AVCHD.
Still picture compatibility≥This unit is compliant with the unified standard DCF (Design rule for Camera File 
system) established by JEITA (Japan Electronics and Information Technology Industries 
Association).
≥ The file format of still pictures supported by  this unit is JPEG. (Not all JPEG formatted 
files will be played back.)
≥ This unit may degrade or not play back still pictures recorded or created on other 
products and other products may degrade or not play back still pictures recorded on this 
unit.
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  42 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							43VQT2M51
Basic
Setup
1
Using the menu screen
1Press the MENU button.
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] or press the 
MENU button to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide display is canceled.
MENU
MENU
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  43 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							44VQT2M51
Basic
Setup
2
Using the Setup Menu
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
The screen indications are selected as 
shown in the illustration.
Please refer to page 95.
Please refer to page 31.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1Touch [SET WORLD TIME].
≥ If the clock is not set, adjust the clock to the current time. ( l31)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] 
and proceed to Step 3.
2(Only when setting your home region)To u c h  [ H O M E ] .≥Touch [ENTER].3(Only when setting your home region)
Touch  /  to select your home 
region and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight 
saving time.   appears and the 
summer time setting is turned on; the time 
difference from GMT is set forward by one 
hour. Touch [SUMMER TIME SET] again to 
return to the normal time setting. : [SETUP] 
# desired setting
[DISPLAY][OFF]/[ON]
MENU
[OFF] [ON]
NOV 15 2010NOV 15 2010
1h30mR 1h20mA
[EXT. DISPLAY][OFF]/[SIMPLE]/[DETAIL]
[CLOCK SET]
[SET WORLD TIME]


AThe current time
B The time difference from GMT 
(Greenwich Mean Time)
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  44 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							45VQT2M51
4(Only when setting the region of your travel destination)
Touch [DESTINATION].≥Touch [ENTER].
≥ When the home region is set for the first time, the screen for selecting home/travel 
destination appears after setting the home region successively. If the home region has 
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight 
saving time.   appears and the 
summer time setting is turned on. The 
clock and time difference from the home 
region time are set forward by one hour. 
Touch [SUMMER TIME SET] again to return 
to the normal time setting.
≥ Close the setting by pressing the MENU 
button.   appears and the time of the 
travel destination is indicated.
To return the display to the home settingSet the home region using Step 1 to 3, and close the setting by touching [EXIT] or pressing 
the MENU button.
≥If you cannot find your travel destination in the area shown on the screen, set it by using 
the time difference from your home region.
It is possible to change the date and time display mode.
It is possible to change the date format.
When about 5 minutes have passed without any operation, this unit automatically turns off to 
save battery life.
≥ The Power Save Function will not activate when:
jconnected to AC adaptor
j using the USB cable for PC, DVD burner etc.
j PRE-REC is used
[DATE/TIME][OFF]/[D/T]/[DATE]
[DATE FORMAT][Y/M/D]/[M/D/Y]/[D/M/Y]
[ECONOMY][OFF]/[5 MINUTES]


C The local time at the selected 
travel destination
D
The time difference between the 
travel destination and the home 
region
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  45 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							46VQT2M51
The unit is put into recording pause approx. 1 second when the power is turned on with the 
mode set to   or  .
≥Depending on the recording cond itions, start time may be longer than 1 second in Still 
Picture Recording Mode.
≥ In the Quick power on mode, the zoom magnification becomes 1 k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick start standby mode about 80% of the power used in Recording pause 
mode is being consumed, so the recording time will be reduced.
≥ Start time will not shorten if there is no SD card inserted.
/
Start time will be shortened if the [Built-i nMemory] is selected in the [MEDIA SELECT], 
even if there is no SD card inserted.
Start time will be shortened if the [HDD] is selected in the [MEDIA SELECT], even if there 
is no SD card inserted.
≥ Change the mode to   or  .
1Set [QUICK START] to [ON].
2 Close the LCD monitor while the mode is set  to 
 or .The status indicator  A flashes green and the unit goes 
into Quick start standby mode.
≥ The lens cover does not close.
3 Open the LCD monitor.The status indicator  A lights red and the unit is put into 
recording pause.
≥ Quick start standby mode is canceled if
jabout 5 minutes have elapsed
j mode is set to 
≥ Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds 
slower in Still Picture Recording Mode.
≥ It may take some time for Automatic white balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes 1 k.
≥ If [ECONOMY] ( l45) is set to [5 MINUTES] and the unit automatically goes into Quick 
Start Standby Mode, close the LCD monitor and then open it again.
≥ Turn the unit off using the power button.
[QUICK POWER ON][OFF]/[ON]
[QUICK START][OFF]/[ON]


HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  46 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							47VQT2M51
Touch screen operation, starting and stopping of recording and power on/off can be 
confirmed with this sound.(Volume low)/ ( Vo l um e  hi g h)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l125)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect  the images actually recorded.
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/ *(Automatic adjustment)
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to   automatically.
≥ The recordable time will become shorter when  you use this unit with the LCD monitor lit up.
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect  the images actually recorded.
1 Touch [LCD SET].
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Touch  /  to adjust settings.
4 Touch [ENTER].
≥Touch [EXIT] or press the MENU button to exit the menu 
screen.
Please refer to page 96.
Please refer to page 96.
Please refer to page 96.
Please refer to page 97.
[ALERT SOUND][OFF]/ /
[POWER LCD]/// /
[LCD SET]
[AV MULTI][COMPONENT]/[AV OUT]
[COMPONENT OUT][480i]/[1080i]
[HDMI RESOLUTION][AUTO]/[1080i]/[480p]
[VIERA Link][OFF]/[ON]
+2+10-1A
+2+10-1A
+1
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  47 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							48VQT2M51
Please refer to page 95.
Set to [YES] for changing the menu settings back to the default condition.
≥Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not be changed.
* For users who have  , this menu is not displayed.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l101, 109)≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ 
transferred. ( l137)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to 
vibrations or shock.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l101, 109)1 Touch [FORMAT MEDIA].
2/
Touch [SD CARD] or 
[Built-inMemory]. Touch [SD CARD] or [HDD].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ 
transferred. ( l137)
≥ Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/
transferred. ( l134)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to 
vibrations or shock.
[TV ASPECT][16:9]/[4:3]
[INITIAL SET]
[FORMAT CARD]
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC. The card may 
not be used on this unit.
//
[FORMAT MEDIA]
Use this unit to format media.
Formatting built-in memory or HDD is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may 
not be used on this unit.
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  48 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							49VQT2M51
The amount of space left on the SD card can be checked.
(Only when the mode is at the   position)
≥Touch [EXIT] or press the MENU button to close the indication.
The amount of space left on the SD card , the built-in memory and HDD can be checked.
(Only when the mode is at the   position)
≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the 
display for the built-in memory/HDD.
≥ Touch [EXIT] or press the MENU button to close the indication.
≥The SD card, built-in memory or built-in HDD r equires some space to store information and 
manage system files, so the actual usable space is slightly less than the indicated value. 
The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000 
bytes. The capacities of this unit, PCs and software are expressed as 
1 GB=1,024k 1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the 
capacity appears to be smaller.
Perform the touch screen calibration if a different object to the one touched is selected.
1 Touch [CALIBRATION].≥ Touch [ENTER].2Touch the [ _] that appears on the screen with the supplied stylus pen.≥Touch [ _] in sequence (up left # down left  # down right # up right  # center).3 Touch [ENTER].
≥Calibration cannot be performed when the LCD monitor is turned 180 o.
[CARD STATUS]
//
[MEDIA STATUS]
[CALIBRATION]
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  49 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分 
						

							50VQT2M51
This item is used to start the unit demonstration.
(Only when the mode is at the   or   position)
If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration 
automatically starts.//
If [DEMO MODE] is switched to [ON] when there is  no SD card inserted and while this unit is 
connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take 
place for approx. 10 minutes, the demonstration automatically starts again. To stop the 
demonstration, set [DEMO MODE] to  [OFF] or insert an SD card.
This item is used to start the Optical Image Stabilizer demo.
(Only when the mode is at the   or   position)
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the de monstration will be canceled.
You can select the language on the screen display and the menu screen.
[DEMO MODE][OFF]/[ON]
[O.I.S. DEMO]
[LANGUAGE][English]/[Français]/[Español]
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book  50 ページ  ２０１０年１月１８日　月曜日　午前１１時３３分