Panasonic Kx Prl262 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Prl262 Operating Instructions Manual. The Panasonic manuals for Phone are available online for free. You can easily download all the documents as PDF.
Page 61
Display message Cause/solution Requires s ubscription to Caller ID. R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. Use r echargeable battery. R A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 3, 7. Troubleshooting I f you still have difficulties after following the instructions in this section, disconnect the base...
Page 62
Problem Cause/solution I cannot pair a cellular phone to t he base unit. R Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. R Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on...
Page 63
Problem Cause/solution I cannot register a handset to a b ase unit. R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 42). Battery recharge Problem Cause/solution The handset beeps and/or flashes. R B attery charge is low. Fully charge the batteries (page 10). I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R C lean the battery ends ( , ) and the...
Page 64
Problem Cause/solution The handset or base unit does n ot ring. R The ringer volume for landline is turned off. Adjust the ringer volume (page 35). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 34). R When one handset is selected to ring for cellular calls, other units do not ring. To change the selection, see page 18. R Silent mode is turned on. Turn it off (page 40). I cannot make local calls with t he handset using a cellular line. R You need to add your area...
Page 65
Caller ID/Talking Caller ID Problem Cause/solution Caller information is not d isplayed. R You must subscribe to Caller ID service. Contact your service provider/telephone company for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL...
Page 66
Problem Cause/solution The 2nd caller’s information is n ot displayed during an outside call. R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your service provider/telephone company and subscribe to the desired service. After subscribing, you may need to contact your service provider/telephone company again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). Using Bluetooth...
Page 67
Problem Cause/solution I cannot use the handset as a r emote control when playing music from your Bluetooth device through the base unit’s speaker. R Confirm that the Bluetooth device supports the Audio Video Remote Control Profile (AVRCP) specification. The handset does not show m usic information on the display. R Confirm that the Bluetooth device supports the Audio Video Remote Control Profile (AVRCP ver 1.3 or later) specification. I am not talking on a cellular c all, but the CELL indicator on the...
Page 68
Bluetooth PIN Problem Cause/solution I cannot remember the PIN. RChange the PIN using the following method. 1 MMENU N (right soft key) #619 2 *7000 3 Enter the new 4-digit PIN. a M OK N 4 Enter the new 4-digit PIN again. a M SAVE N a M OFF N Voice mail Problem Cause/solution “ V oice mail msg. via phone co. ” is shown on the handset display. How do I remove this message from the display? R This notification is displayed when your service provider/ telephone company’s voice mail service (not the...
Page 69
FCC and other information For assistance, please visit http://www.panasonic.com/help 69Useful InformationPRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 692014/01/09 11:59:45This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration...
Page 70
70 For assistance, please visit http://www.panasonic.com/helpUseful InformationPRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 702014/01/09 11:59:45manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such...