Panasonic Kx T206e Installation Manual

21
System Programming
01[A] [B]
022 (for day) /   (for night) [A] [B]7
System Speed Dialling Number Set
Description
Used to program System Speed Dial numbers.  These numbers are available to all exten-
sion users.  There are 40 numbers from 00 through 39.
Condition
• A maximum of 32 digit numbers can be stored.
• You must store an automatic line access code (9 or 0), or an individual line code (81 or 82)
first.  The automatic line access code is assigned in “#52 CO Line Access Number
Selection”.
• If you...

22
System Programming
0 (for day) /   (for night) [A] [B]575
0 (for day) /   (for night) [A] [B]337
Outgoing Permitted CO2 Assignment (Day/Night)
Description
Determines the extensions which can have access to CO line 2 in both day and night
modes.  The extension users can make outgoing CO calls if their extensions are assigned as
“ENABLE”.
Input Format
Explanation
• [A]= 1 through 6 (corresponding to extension no. 21 through 26)
• [B]= 0: DISABLE/ 1: ENABLE
DefaultAll extensions– 1: ENABLE
CO1 Ringing...

23
System Programming
Class
CLASS 1
CLASS 2
CLASS 3
CLASS 4Restricted calls
None
Numbers programmed in “#08 Denied code (Class 2, 3) ”
Numbers programmed in “#08 Denied code (Class 2, 3)
and “#09 Denied code (Class 3)”
All CO calls
0 (for day) /   (for night) [A] [B]777
Doorphone Assignment  (Day/Night)
Description
Assigns the extensions which will ring when a doorphone call is received and enables to
call the doorphone in both day and night modes.
Condition
• All extensions must be assigned as “0:...

24
System Programming
10(Record your message)
90 [A] [Denied code No.]
TRS Denied Code (CLASS 2, 3)
Description
Allows you to specify the numbers which are toll-restricted for TRS Class 2 and Class 3.
Condition
• The character “” can be any number.
Input Format
Explanation
• [A]= Code No.: 0 through 9  1 digit • Denied code number: 7 digits, 
DefaultAll codes– Not stored
TRS Denied Code (CLASS 3)
Description
Allows you to specify the numbers which are toll-restricted for TRS Class 3.
Condition
• The...

25
System Programming
12 [A]
13 [A] [B]
OGM Play
Description
Confirms the outgoing message recorded in the OGM Recording program.
Condition
• If you perform programming with a PT, the message “PLAYBACK” will be displayed on
its panel.
Input Format
Fax Connection
Description
Allows the system to detect the CNG tone from a facsimile.  If it is set to “ENABLE”,
extension 26 will receive fax transmission data.
Condition
• The optional DISA/FAX Detect card (KX-T20691) should be installed.
• The “#24 Call...

26
System Programming
41 [A] [B]
1 [A]5
CO2 Delayed Ringing Assignment
Description
Assigns delayed ringing to extensions when a call from CO line 2 is received.
Condition
• The number of delayed rings is assigned by the “#15 Delayed Ringing Count Selection”
program.
• This feature is not available for the calls sent by the DISA feature.
Input Format
Explanation
• [A]= 1 through 6 (corresponding to extension no. 21 through 26)
• [B]= 0: DISABLE (not delayed)/ 1: ENABLE (delayed)
DefaultAll extensions– 0:...

27
System Programming
7 [A] [BB] [CC] [D]1
99
7 [A]0
 [A] [B]16
Door Opener Assignment
Description
Assigns each extension to have access to door opener or not.
Input Format
Explanation
• [A]= 1 through 6 (corresponding to extension no. 21 through 26)
• [B]= 0: DISABLE/ 1: ENABLE
DefaultAll extensions– 1: ENABLE
Day/Night Switching Mode
Description
Assigns automatic or manual day/night mode.
Condition
• If automatic switching mode is assigned, day/night mode is switched at the time
programmed in “#71...

28
System Programming
Other Programs
•Host PBX Access Code Assignment
Assigns a Host PBX access code to make an
outside call, if the system is installed behind the
host PBX.  A pause is automatically inserted
after the access code and the toll restriction
feature applies to the number after the code.
Input Format: #21 [A] [code] #
• [A]=1: CO1/ 2: CO2
• [code] = 2 digits max. (Default : Not stored)
•Hookswitch Flash Time Assignment
Sets the time to send the flash signal to each CO
line.
Input Format: #22...

29
System Programming
•Hookswitch Flash Time Range
Assignment
Sets the hookswitch flash time range.
Input Format: #65 [A]
• [A]=1: 80–1000ms / 2: 80–150ms
3: 50–150ms (default)
•Door Opener Access Time
Assigns the length of the Door Opener time.
The door is unlocked for the assigned time.
Input Format: #67 [A]
• [A]= 1: 1 sec/ 2: 2 sec/ 3: 3 sec/ 4: 4 sec/
 5: 5 sec (default) / 6: 6 sec/ 7: 7 sec /
 8: 8 sec
Other Programs (continued)
•DISA Ringing Time Assignment
Sets the time to forward a call sent by...

30
System Programming
Least Cost Routing (LCR) Programs
Least Cost Routing (LCR) is a system programmable feature that automatically selects the least
expensive route available at the time a long distance call is made.
It is not necessary to dial the access code of the least expensive carrier.
You must assign the programs on the next page to activate the LCR feature.
The following chart shows the procedure of LCR feature.
NoYes
YesYes
No
No
Is the dialled number an 
emergency call number?
Is the dialled...