Panasonic Kx-T2315 Integrated Telephone System Operating Instructions

							Press the PROGRAM button if 
you notice an error. 
l 
Repeat all the steps of “Storing Phone 
Numbers” on the page 10 to reprogram. 
Example: To erase the number in memory station m pi : 
Be sure that the handset is on the cradle and the SP-PHONE indicator is off 
and the batteries are installed. 
Press the PROGRAM button 
until the STORE indicator lights. 
Press the Station number m 121. 
Press the AUTO/STORE button. 
Press the PROGRAM button. 
l 
The STORE indicator goes out. 
14  
						

							Automatic Dialing (cont.) 
Be sure that the handset is on the cradle and the SP-PHONE indicator is off 
and the batteries are installed. 
Press the PROGRAM button 
until the STORE indicator lights. 
Repeat storing the same number 
into the same station. 
r Press the AUTO/STORE button. 
l 
The STORE indicator. 
Blinks once: The entry is the same as 
what was previously stored. 
Lights: The entry is different from 
the one that was previously 
stored 
15  
						

							Other Features 
The MUTE button is useful when you do not want your voice or conversation to 
be heard by the other party. 
Press the MUTE button. 
l 
The MUTE indicator lights. 
To resume the conversation, 
press the MUTE button again. 
l 
The MUTE indicator goes out. 
If you want to change from pulse mode into tone mode during dialing, the TONE 
button can be used instead of changing the Dialing Mode selector. 
16  
						

							Hold 
The HOLD button is useful to keep a call on hold while having a conversation. 
Press the HOLD button while in 
conversation. 
l 
The HOLD indicator blinks slowly. 
l You can replace the handset on to the 
n If the handset is off-hook: 
Press the HOLD button and start 
speaking. 
w If the handset is on the cradle: 
Lift the handset or 
SP-PHONE button 
speaking. 
n When using another telephone connected on the same line: 
press the 
and start 
Lift the handset of the other 
telephone. 
If the hold is not released, press the hook 
switch of the other telephone for about one 
second. 
17  
						

							Special Phone Company Services 
The FLASH button can be used for CALL WAITING. 
For more details please see the brochure issued by your telephone company. 
While having a conversation, another party calls and 
a call waiting tone is heard. 
Press the FLASH button once. 
l 
The first conversation is placed on 
hold and the second call can be 
answered. 
Press the FLASH button once 
again. 
l 
The first caller can be answered again 
and the second call is placed on hold. 
l If the calling party on hold hangs UP, 
the line is terminated. 
n You may access some features of your PBX using the FLASH button instead 
of the hookswitch. 
Press the FLASH button once in the dialing operation. The “Flash” can be 
stored into memory in the same way as “Storing Phone Numbers” on page 10. 
The memory station can be programmed to automatically access features of 
your host PBX. Press the FLASH button once at the position where the 
hookswitch operation is required in a dialing operation. 
18  
						

							An Outside Line or a Computer Accessed Line 
The PAUSE function in the dial operation is helpful when accessing an outside 
line or a Computer-Accessed long distance service. 
If you press the PAUSE button, you can dial the telephone number without waiting 
for the line access or the computer tone. 
One pause is required when waiting for an outside dial tone. 
Example (PBX): 
9 
F! -1 ( Phone No. ] 
Line Access No. 
Some PBXs require the “PAUSE” during the redial. 
Two pauses are required when waiting for a computer access tone. 
Example (For MCI, SPRINT, etc.): 
Storing telephone numbers into memory stations m m, pj m and m 0 
AUTO/STORE 
ip Toneor Puke’ 
hy ‘?%k!$’ -1 I Authorization No. 1 1 AUTO/STORE I 
7 Tone Only 1 
l 2 or 3 memory stations are required, as one memory cannot store over 16 
digits. 
l Pressing the PAUSE button once counts as 1 digit. 
l Pressing the TONE button counts as 1 digit. 
(Refer to “Tone Button Usage” on page 16.) 
19  
						

							Troubleshooting Guide 
Problem Cause & Remedy 
The unit does not ring. Ringer Volume Selector is set to 
“OFF”. Set to “HIGH” or “LOW”. 
l The caller suddenly can not hear 
my voice during a conversation. 
l I suddenly can not hear caller’s 
voice during a conversation. Look at the STORE indicator. 
If it is blinking slowly, press the 
HOLD button to resume the 
conversation. 
Redialing or Programming OperatiOn 
does not function. 
Hands-free operation does not 
function after pressing the 
SP-PHONE button. Batteries may have become weak. 
Replace all the batteries. 
Accessory Order Information 
Replacement pans and accessories are available through your local authorized 
parts distributor. 
For the authorized distributors in your area, call toll free: l-800-447-4700 
20  
						

							Referencia rhpida 
Localizackb de 10s controles 
Both de llamada directa 
Bot6n FLASH 
Both silenciador 
(MUTE) Tarjeta de memoria 
Both de aut/ 
almacenamiento 
(AUTO/STORE) 
Both de programa 
(PROGRAM) 
)t6n de pausa 
Both de rediscado 
(REDIAL) 
I Both del parlante-micrbfono 
(SP-PHONE) 
Both de retencih 
(HOLD) 
21  
						

							Conexibn 
ord6n de microtelkfono 
Toma modular para 
linea irnica (FIJI 1 C) 
n Esta unidad no puede conectarse a una linea operada con monedas. Si Vd. 
est.5 en una linea de usuario, compruebe con su compatiia telef6nica local. 
n No utilice ninglin microtekfono diferente del microtelkfono Panasonic hecho 
para el modelo KX-T231 OIKX-T231.5. 
22  
						

							Selector de modo de discado 
Fijar a “Tone”. 
Si no se puede discar, ponga en “PULSE”. 
Selector de volumen de timbre 
Poner en “HIGH”. 
LOW: El sonido de repique serk. bajo. 
OFF: El telkfono no repicark 
Interruptor de ~610 llamada local 
OFF: Puede efectuarse discado normal. 
ON: No es posible la operacih de 
discado manual o automAtico de un 
nlimero con m&s de 7 digitos. 
23