Panasonic Kx-T7880 Wireless Phone Reference Guide

ADJUSTING THE RINGER VOLUME 
You can adjust the ringer volume. (Default: High) 
1. 
Press q key until a confirmation tone sounds. (More than one second.) 
2. Press 
q key again. You will hear the current volume level. 
3. By pressing 
q key, the volume level alternates between High and Low. 
SELECTING THE ANSWERING MODE 
You can select either Automatic or Manual to answer a call. (Default: Automatic) 
In Automatic mode, you just pick up the handset from the charging unit to answer a call. 
Setting 
1....

PROGRAMMING FOR SPEED OR ONE-TOUCH DIAGSLT MODE 
To enter station programming mode; 
Set the POWER/RINGER switch to “ON,” while pressing (PROG button. 
The TALKIBATT. LOW indicator lights red. 
You hear a conJirmation tone. 
To exit; 
Press (TALK1 button or place the handset on the charging unit. 
D Storing telephone numbers 
Flexible 
(Fl - F4) 
AUTO 
FYXFER 
For Speed Dialing; 
1. 
Enter Programming Mode. 
2. Enter 
/phone number ( . 
3. Press m button. 
4. Enter 
Ispeed dialing number ( (0 - 
5. To...

SAFETY INSTALLATION 
INSTRUCTIONS 
When installing telephone wiring, basic safety 
precautions should always be followed to reduce 
the risk of fire, electric shock and injury to 
persons, including the following: 
1. 
2. 
3. 
4. Never install telephone wiring during a light- 
ning storm. 
Never install telephone jacks in wet locations 
unless the jack is specifically designed for 
wet locations. 
Never touch uninsulated telephone wires or 
terminals unless the telephone line has been 
disconnected at...

Panasonic Consumer Electronics Company, 
Panasonic Sales Company, 
Division of Matsushita Electric Corporation of 
Division of Matsushita Electric of 
America Puerto Rico, inc. 
One Panasonic Way 
Ave. 65 de Infanterfa, Km. 9.5, San Gabriel 
Secaucus, New Jersey 07094 
industrial Park, Carolina, Puerto Rico 00985 
PANASONIC 
Business Telephone System (BTS) Products 
Limited Warranty 
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as 
‘The warrantor”) will...

Setvicenter Directory Panasonic 
Customer Satisfaction Center 2F-3, One Panasonic Way, Secaucus, NJ 07094 (Headquarters) 
201-348-9090 (9:00am-8:OOpm Monday-Friday, EST) 
l-800-332-5388 (Consumer Orders Only) 
Panasonic Services Company 20421 84th Avenue South Kent, WA 98032 
(6:OO am to 6:00 pm Monday-Friday; 6:OO am to IO:30 am Saturday, PST) 
(Visa, Master card, Discover card, American Express or Check) 
To locate an independent authorized servicenter or parts distributor in your area, 
within the USA...

Panasonic Consumer Electronics Company, 
Division of Matsushita Electric Corporation of America 
One Panasonic Way, Secaucus, New Jersey 07094 
Panasonic Sales Company (“PSC”), 
Division of Matsushita Electric of Puerto Rico, Inc. 
Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina, 
Puerto Rico 00985 
Printed in Japan PSQV1013YA KK1295NS6017CM  

OPERATING INSTRUCTIONS-SLT MODE 
-HOLD 
0 Making Calls 
l 
Pick up the handset and press the 
-1 button. 
l Dial 1 phone number I. 
-When you misdial, 
press (FLASH1 button. 
You hear a new dial tone. 
Cl Receiving Calls 
. Pick up the handset and press the 
-1 button. 
OR 
l Pick up the handset, if 
“Automatic” is set as an 
answering mode. 
tl Call Hold 
D Setting 
. 
Press (HOLD button. 
D Retrieving 
l Press )TALK] button. 
Cl Call Waiting 
To use this feature, you must subscribe 
to the call waiting...

PROGRAMMING FOR ONE-TOUCH DIAL-EMSS MODE 
To enter station programming mode; 
Set the POWER/RINGER switch to “ON,” while pressing [PROG(#) button. 
The TALKIBATT. LOW indicator lights red. 
You hear a conjknation tone. 
To exit; 
D 
Press -1 button or place the handset on the charging unit. 
Changing the Flexible keys to an One-Touch Dial button and storing numbers 
KX-T336 
1. Enter Programming Mode. 
2. Press /Flexiblel (F2 or F3) key. 
3. Dial 
q . 
4. Dial Iline access code (default: 9) for 
an...

OPERATING INSTRUCTIONS-EMSS MODE 
-Note 
I) Off-hook means; 
Pick up the handset from the charging unit 
and press m button. If Automatic 
mode is selected, just pick up the handset 
from the charging unit when receiving a call. 
3 On-hook means; 
Replace the handset on the charging unit or 
press ml button. 
3 Default Settings of Flexible Keys 
Flexible 1 2 3 4 
KX-T336 t 
PDN PDN PDN 
]T;pO~3;~IN~’ CO1 j CO21 
CO31 1 
n more detail refer to the manual of the 
0 Making Calls 
D Intercom Calling 
....

OPERATING INSTRUCTIONS FOR KX-T336 
-Note Numbers entered depend on which numbering 
plan you are using. 
0 Call Forwarding 
Specified calls to your telephone are 
automatically forwarded to another 
preset extension. 
D Setting 
. Off-hook. 
l Press m. 
l Enter [feature number I. 
- 2 
: All Calls 
- 3 : Busy or Off-Hook 
- 4 : No Answer 
- 6 : Busy/Off-HooWNo Answer 
l Dial Iextension number ) . 
l On-hook. 
D Canceling 
l Off-hook. 
. 
Press r##I . 
l Dial q . 
l On-hook. 
III Directed Call Pickup...