Panasonic Kx Ta824 Programming Manual

Programming Manual 11
Section 1
Overview
This section provides an overview of methods of programming 
the PBX, and information about password security. 

1.1 Introduction
12 Programming Manual
1.1 Introduction
1.1.1 Introduction
These programming instructions are designed to serve as an overall system programming reference for the 
Panasonic Advanced Hybrid System. The PBX has default settings that can be changed to meet your 
needs. These settings control the manner in which the PBX features described in this Programming Manual 
function, and changing these settings is referred to as system programming. System programming can be 
performed by only one...

Programming Manual 13
Section 2
PT Programming
This section serves as reference operating instructions when 
using a display PT to program the PBX. 

2.1 PT Programming—Instructions
14 Programming Manual
2.1 PT Programming—Instructions
Required Telephone
PBX settings can be customized through system programming by using a proprietary telephone (PT) with 
a display, such as the KX-T7731. An authorized administrator or the manager extension connected to 
extension jack 01 can access system programming.
 Buttons and Functions
Fixed Button (KX-T7700/KX-TA30800 series) Function
PREV (PREVIOUS)
NEXT
SECRET
STORE
PA U S E
PROGRAM
END
SELECT
FLASH
–
– 

2.1 PT Programming—Instructions
Programming Manual 15
Entering System Programming Mode
Using a PT to perform system programming allows an authorized administrator to set a wide range of PBX 
features and parameters. To enter system programming mode, the system password is required. With the 
system password, all system programming is accessible.
Notes
 means default value throughout these programming instructions.
Entering Manager Programming Mode
Using a PT to perform manager programming allows the...

2.1 PT Programming—Instructions
16 Programming Manual
Entering Characters
The PTs dialing buttons can be used to enter characters when storing a name or message. The following 
tables depict the available characters:
Table 1 (Alphabet mode)/Table 2 (Numeral mode)
[Example of Entering Characters]
To enter Ann:
Notes
 To toggle between Alphabet mode and Numeral mode, press SELECT.
 To move the cursor right, press  .
 To delete all characters, press CLEAR. To delete a character, press  .
Ann
 
6(5...

2.2 PT Programming—Procedures
Programming Manual 17
2.2 PT Programming—Procedures
Notes
  means default value throughout these programming instructions.
  means to select All throughout these programming instructions.
 The following are displayed when you store a number, such as a telephone number, or feature 
number:
P: PAUSE; -: CONF; F: FLASH/RECALL; [ ]: INTERCOM
x: PAUSE (substitutes for any number [i.e., wild card])
 To return to the previous programming item, press  .
 To correct a wrong...

2.2 PT Programming—Procedures
18 Programming Manual
[001] System Speed Dialing Number
Used to store frequently dialed numbers. These numbers are available for all extension users when making 
or receiving calls. 
A maximum of 100 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can be 
programmed.
Conditions
 An Outside (CO) Line Access number (9, 81 through 88) should be included before the phone 
number. When dialing, a pause will automatically be inserted after the Outside (CO)...

2.2 PT Programming—Procedures
Programming Manual 19
2.To avoid unauthorized access and possible fraudulent dialing, maintain the secrecy of the 
password.
3.We strongly recommend that you change the default password value to something else for reasons 
of system security. It is best to use a password of 7 digits.
4.Please change the password periodically.
5.If a system password is forgotten, it can be found by loading a backup of the system data into a 
PC, and checking the password using the KX-TA...

2.2 PT Programming—Procedures
20 Programming Manual
1.1.59 Fixed Buttons
[004] Console Paired Telephone
Selects the extension jack number of the PT to be used in pair with the DSS Console.
Conditions
 To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
 The extension jack number preassigned as a DSS Console in [003] DSS Console Jack Assignment 
should not be assigned in this program.
 An SLT cannot be paired with the DSS Console.
Programming Manual References...