Panasonic Kx Ta824 Programming Manual
Here you can view all the pages of manual Panasonic Kx Ta824 Programming Manual. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
2.2 PT Programming—Procedures
Programming Manual 21
[006] Time Service Switching Mode
Selects whether the time service mode is switched between day, lunch, and night manually or automatically.
Programming Manual References
[007] Time Service Start Time
Feature Manual References
1.1.114 Time Service
[007] Time Service Start Time
Enables the start times of each time service mode and end time of lunch mode for each day of the week.
Conditions
This program is available when switching mode is enabled in...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-20.png "Page 21
2.2 PT Programming—Procedures
Programming Manual 21
[006] Time Service Switching Mode
Selects whether the time service mode is switched between day, lunch, and night manually or automatically.
Programming Manual References
[007] Time Service Start Time
Feature Manual References
1.1.114 Time Service
[007] Time Service Start Time
Enables the start times of each time service mode and end time of lunch mode for each day of the week.
Conditions
This program is available when switching mode is enabled in...")
2.2 PT Programming—Procedures Programming Manual 21 [006] Time Service Switching Mode Selects whether the time service mode is switched between day, lunch, and night manually or automatically. Programming Manual References [007] Time Service Start Time Feature Manual References 1.1.114 Time Service [007] Time Service Start Time Enables the start times of each time service mode and end time of lunch mode for each day of the week. Conditions This program is available when switching mode is enabled in...
Page 22
![Page 22
2.2 PT Programming—Procedures
22 Programming Manual
[008] Operator Assignment
Selects the extension jack number to be designated as the operator.
Conditions
To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
Feature Manual References
1.1.87 Operator/Manager Features
[009] Extension Number
Specifies an extension number for each extension.
Conditions
The same extension number cannot be entered for 2 different extension jacks.
Programming Manual References...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-21.png "Page 22
2.2 PT Programming—Procedures
22 Programming Manual
[008] Operator Assignment
Selects the extension jack number to be designated as the operator.
Conditions
To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
Feature Manual References
1.1.87 Operator/Manager Features
[009] Extension Number
Specifies an extension number for each extension.
Conditions
The same extension number cannot be entered for 2 different extension jacks.
Programming Manual References...")
2.2 PT Programming—Procedures 22 Programming Manual [008] Operator Assignment Selects the extension jack number to be designated as the operator. Conditions To delete (disable) an extension jack number, press CLEAR in the extension jack number step. Feature Manual References 1.1.87 Operator/Manager Features [009] Extension Number Specifies an extension number for each extension. Conditions The same extension number cannot be entered for 2 different extension jacks. Programming Manual References...
Page 23
![Page 23
2.2 PT Programming—Procedures
Programming Manual 23
[007] Time Service Start Time
1.1.112 Station Message Detail Recording (SMDR)
1.1.115 Timed Reminder
Programming Manual References
[000] Date & Time
[007] Time Service Start Time
Feature Manual References
1.1.43 Display Information
1.1.112 Station Message Detail Recording (SMDR)
1.1.115 Timed Reminder
[011] System Speed Dialing Name
Specifies a name for the System Speed Dialing number. The name will be displayed when making a call by
using the System...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-22.png "Page 23
2.2 PT Programming—Procedures
Programming Manual 23
[007] Time Service Start Time
1.1.112 Station Message Detail Recording (SMDR)
1.1.115 Timed Reminder
Programming Manual References
[000] Date & Time
[007] Time Service Start Time
Feature Manual References
1.1.43 Display Information
1.1.112 Station Message Detail Recording (SMDR)
1.1.115 Timed Reminder
[011] System Speed Dialing Name
Specifies a name for the System Speed Dialing number. The name will be displayed when making a call by
using the System...")
2.2 PT Programming—Procedures Programming Manual 23 [007] Time Service Start Time 1.1.112 Station Message Detail Recording (SMDR) 1.1.115 Timed Reminder Programming Manual References [000] Date & Time [007] Time Service Start Time Feature Manual References 1.1.43 Display Information 1.1.112 Station Message Detail Recording (SMDR) 1.1.115 Timed Reminder [011] System Speed Dialing Name Specifies a name for the System Speed Dialing number. The name will be displayed when making a call by using the System...
Page 24
![Page 24
2.2 PT Programming—Procedures
24 Programming Manual
[100] Hunting Group Set
Enables the redirection of calls to an idle member of the same extension group when the called extension
is busy.
Programming Manual References
[600] Extension Group
Feature Manual References
1.1.67 Idle Extension Hunting
[101] Hunting Type
Selects the hunting type for each group.
Notes
Circular: Circulates until the call is answered.
Te r m i n a te: Terminates at the last extension.
Conditions
This program is available when...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-23.png "Page 24
2.2 PT Programming—Procedures
24 Programming Manual
[100] Hunting Group Set
Enables the redirection of calls to an idle member of the same extension group when the called extension
is busy.
Programming Manual References
[600] Extension Group
Feature Manual References
1.1.67 Idle Extension Hunting
[101] Hunting Type
Selects the hunting type for each group.
Notes
Circular: Circulates until the call is answered.
Te r m i n a te: Terminates at the last extension.
Conditions
This program is available when...")
2.2 PT Programming—Procedures 24 Programming Manual [100] Hunting Group Set Enables the redirection of calls to an idle member of the same extension group when the called extension is busy. Programming Manual References [600] Extension Group Feature Manual References 1.1.67 Idle Extension Hunting [101] Hunting Type Selects the hunting type for each group. Notes Circular: Circulates until the call is answered. Te r m i n a te: Terminates at the last extension. Conditions This program is available when...
Page 25
![Page 25
2.2 PT Programming—Procedures
Programming Manual 25
[102] DTMF Integration Port
Enables the extension jack number(s) (07, 08, 15, 16) to be connected to a Panasonic VPS and specified
as the voice mail ports.
Feature Manual References
1.1.121 Voice Mail Inband (DTMF) Integration
[103] DTMF Integration
Enables Inband (DTMF) Integration between the VPS and the PBX when a KX-TVA/KX-TVS series VPS is
connected to the PBX. The VPS and PBX communicate with each other by sending DTMF signals.
Conditions
In...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-24.png "Page 25
2.2 PT Programming—Procedures
Programming Manual 25
[102] DTMF Integration Port
Enables the extension jack number(s) (07, 08, 15, 16) to be connected to a Panasonic VPS and specified
as the voice mail ports.
Feature Manual References
1.1.121 Voice Mail Inband (DTMF) Integration
[103] DTMF Integration
Enables Inband (DTMF) Integration between the VPS and the PBX when a KX-TVA/KX-TVS series VPS is
connected to the PBX. The VPS and PBX communicate with each other by sending DTMF signals.
Conditions
In...")
2.2 PT Programming—Procedures Programming Manual 25 [102] DTMF Integration Port Enables the extension jack number(s) (07, 08, 15, 16) to be connected to a Panasonic VPS and specified as the voice mail ports. Feature Manual References 1.1.121 Voice Mail Inband (DTMF) Integration [103] DTMF Integration Enables Inband (DTMF) Integration between the VPS and the PBX when a KX-TVA/KX-TVS series VPS is connected to the PBX. The VPS and PBX communicate with each other by sending DTMF signals. Conditions In...
Page 26
![Page 26
2.2 PT Programming—Procedures
26 Programming Manual
[105] Conference Tone
Enables the PBX to send a confirmation tone before starting or ending a conference call established by the
Conference feature or Executive Busy Override feature.
Feature Manual References
1.1.33 Conference
1.1.50 Executive Busy Override—Extension
1.1.51 Executive Busy Override—Outside (CO) Line
[106] External Pager Access Tone
Enables the PBX to send a confirmation tone to the external pager before a paging announcement.
Feature...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-25.png "Page 26
2.2 PT Programming—Procedures
26 Programming Manual
[105] Conference Tone
Enables the PBX to send a confirmation tone before starting or ending a conference call established by the
Conference feature or Executive Busy Override feature.
Feature Manual References
1.1.33 Conference
1.1.50 Executive Busy Override—Extension
1.1.51 Executive Busy Override—Outside (CO) Line
[106] External Pager Access Tone
Enables the PBX to send a confirmation tone to the external pager before a paging announcement.
Feature...")
2.2 PT Programming—Procedures 26 Programming Manual [105] Conference Tone Enables the PBX to send a confirmation tone before starting or ending a conference call established by the Conference feature or Executive Busy Override feature. Feature Manual References 1.1.33 Conference 1.1.50 Executive Busy Override—Extension 1.1.51 Executive Busy Override—Outside (CO) Line [106] External Pager Access Tone Enables the PBX to send a confirmation tone to the external pager before a paging announcement. Feature...
Page 27
![Page 27
2.2 PT Programming—Procedures
Programming Manual 27
Feature Manual References
1.1.55 Extension Lock
1.1.107 Remote Extension Lock
[109] CO Indicator
Enables the corresponding PTs to answer incoming outside (CO) line calls. The CO button indicator will
flash when an outside (CO) line call is received. If this program is enabled, a PT user can answer the call
by pressing the flashing CO button. If this program is disabled, the user cannot answer the call even if he or
she presses the CO button....](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-26.png "Page 27
2.2 PT Programming—Procedures
Programming Manual 27
Feature Manual References
1.1.55 Extension Lock
1.1.107 Remote Extension Lock
[109] CO Indicator
Enables the corresponding PTs to answer incoming outside (CO) line calls. The CO button indicator will
flash when an outside (CO) line call is received. If this program is enabled, a PT user can answer the call
by pressing the flashing CO button. If this program is disabled, the user cannot answer the call even if he or
she presses the CO button....")
2.2 PT Programming—Procedures Programming Manual 27 Feature Manual References 1.1.55 Extension Lock 1.1.107 Remote Extension Lock [109] CO Indicator Enables the corresponding PTs to answer incoming outside (CO) line calls. The CO button indicator will flash when an outside (CO) line call is received. If this program is enabled, a PT user can answer the call by pressing the flashing CO button. If this program is disabled, the user cannot answer the call even if he or she presses the CO button....
Page 28
![Page 28
2.2 PT Programming—Procedures
28 Programming Manual
Notes
Enable: FWD—Flashing slowly, DND—Flashing at moderate speed
Disable: FWD—Off, DND—Off
Feature Manual References
1.1.70 LED Indication
[115] Extension Ring Tone Pattern
Selects the extension ring tone pattern for incoming intercom calls.
Feature Manual References
1.1.69 Intercom Call
1.1.108 Ring Tone Pattern Selection
2.2.1 Tones/Ring Tones
[117] Call Pickup Tone
Enables the PBX to send a confirmation tone when the Call Pickup feature is...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-27.png "Page 28
2.2 PT Programming—Procedures
28 Programming Manual
Notes
Enable: FWD—Flashing slowly, DND—Flashing at moderate speed
Disable: FWD—Off, DND—Off
Feature Manual References
1.1.70 LED Indication
[115] Extension Ring Tone Pattern
Selects the extension ring tone pattern for incoming intercom calls.
Feature Manual References
1.1.69 Intercom Call
1.1.108 Ring Tone Pattern Selection
2.2.1 Tones/Ring Tones
[117] Call Pickup Tone
Enables the PBX to send a confirmation tone when the Call Pickup feature is...")
2.2 PT Programming—Procedures 28 Programming Manual Notes Enable: FWD—Flashing slowly, DND—Flashing at moderate speed Disable: FWD—Off, DND—Off Feature Manual References 1.1.70 LED Indication [115] Extension Ring Tone Pattern Selects the extension ring tone pattern for incoming intercom calls. Feature Manual References 1.1.69 Intercom Call 1.1.108 Ring Tone Pattern Selection 2.2.1 Tones/Ring Tones [117] Call Pickup Tone Enables the PBX to send a confirmation tone when the Call Pickup feature is...
Page 29
![Page 29
2.2 PT Programming—Procedures
Programming Manual 29
[125] TRS Check for * and #
Enables TRS to check for the user-dialed digits and #. This is useful in preventing some unauthorized
calls.
Feature Manual References
1.1.117 Toll Restriction (TRS)
[128] Ringback Tone Pattern
Selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls
(including a DISA call).
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.69 Intercom Call
2.2.1...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-28.png "Page 29
2.2 PT Programming—Procedures
Programming Manual 29
[125] TRS Check for * and #
Enables TRS to check for the user-dialed digits and #. This is useful in preventing some unauthorized
calls.
Feature Manual References
1.1.117 Toll Restriction (TRS)
[128] Ringback Tone Pattern
Selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls
(including a DISA call).
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.69 Intercom Call
2.2.1...")
2.2 PT Programming—Procedures Programming Manual 29 [125] TRS Check for * and # Enables TRS to check for the user-dialed digits and #. This is useful in preventing some unauthorized calls. Feature Manual References 1.1.117 Toll Restriction (TRS) [128] Ringback Tone Pattern Selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls (including a DISA call). Feature Manual References 1.1.41 Direct Inward System Access (DISA) 1.1.69 Intercom Call 2.2.1...
Page 30
![Page 30
2.2 PT Programming—Procedures
30 Programming Manual
[131] VM 2 APT Port
Enables the extension jack number(s) (15, or 15 and 16) to be connected to a Panasonic VPS and specified
as the voice mail APT por ts.
Conditions
To change the current setting (to/from a setting other than Disable), select Disable first, then
select the desired setting.
This program is not available when Enable is selected in [103] DTMF Integration.
When Port7 & 8 & 15 or Port7 & 8 & 15 & 16 is selected in [130] VM 1 APT...](http://img.usermanuals.tech/thumb/58/64571/w300_kx-ta824_en_program_om_d-29.png "Page 30
2.2 PT Programming—Procedures
30 Programming Manual
[131] VM 2 APT Port
Enables the extension jack number(s) (15, or 15 and 16) to be connected to a Panasonic VPS and specified
as the voice mail APT por ts.
Conditions
To change the current setting (to/from a setting other than Disable), select Disable first, then
select the desired setting.
This program is not available when Enable is selected in [103] DTMF Integration.
When Port7 & 8 & 15 or Port7 & 8 & 15 & 16 is selected in [130] VM 1 APT...")
2.2 PT Programming—Procedures 30 Programming Manual [131] VM 2 APT Port Enables the extension jack number(s) (15, or 15 and 16) to be connected to a Panasonic VPS and specified as the voice mail APT por ts. Conditions To change the current setting (to/from a setting other than Disable), select Disable first, then select the desired setting. This program is not available when Enable is selected in [103] DTMF Integration. When Port7 & 8 & 15 or Port7 & 8 & 15 & 16 is selected in [130] VM 1 APT...