Home > Panasonic > Cordless Telephone > Panasonic Kx Tg9381 Operating Instructions Manual

Panasonic Kx Tg9381 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Kx Tg9381 Operating Instructions Manual. The Panasonic manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.

Page 51

Useful Information
51For assistance, please visit http://www.panasonic.com/help
5Connect the telephone line cord. Mount the 
unit by inserting the mounting pins into the 
round openings on the adaptor (for pin 2, use 
the round cut out at the bottom of the adaptor 
if you are using the 4 inch phone plate), then 
slide the unit down to secure it. Connect the 
AC adaptor to power outlet (page 9).
L There are 2 common types of wall phone 
plates. The distance between  1 and  2 
may vary depending on the...

Page 52

Useful Information
52For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display messageCause/solution
Busy LThe called unit is in use.
L Other units are in use and the system is busy. Try again later.
L Privacy mode is on for the call you tried to join (page 21).
L The handset you are using is too far from the base unit. Move 
closer and try again.
L The handset’s registration may have been...

Page 53

Useful Information
53For assistance, please visit http://www.panasonic.com/help
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC 
adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then 
insert the batteries into the handset again.
General useUse rechargeable battery.
LA wrong type of battery such as Alkaline or Manganese was 
inserted. Use only the rechargeable Ni-MH batteries noted...

Page 54

Useful Information
54For assistance, please visit http://www.panasonic.com/help
Programmable settings
Battery recharge
Making/answering calls, intercom
ProblemCause/solution
The display is in a language I 
cannot read. L
Change the display language (page 16).
While programming, the unit starts 
to ring. L
A call is being received. Answer the call and start again after 
hanging up.
I cannot register a handset to a 
base unit. L
The maximum number of handsets (6) is already registered to 
the base unit....

Page 55

Useful Information
55For assistance, please visit http://www.panasonic.com/help
Caller IDI cannot make a call.
LThe dialing mode may be set incorrectly. Change the setting 
(page 16).
L The handset is too far from the base unit. Move closer and try 
again.
I cannot make long distance calls. LMake sure that you have long distance service.
ProblemCause/solution
Caller information is not 
displayed. L
You must subscribe to Caller ID  service. Contact your service 
provider/telephone company for details.
L...

Page 56

Useful Information
56For assistance, please visit http://www.panasonic.com/help
Answering system
Using Bluetooth devices
ProblemCause/solution
The unit does not record new 
messages. L
The answering system is not turned on for the line you wish to 
record messages from. Select the desired line or both lines, 
then turn the answering system on (page 37).
L The message memory is full. Erase unnecessary messages 
(page 38).
L The answering system is activated for both lines, and the 1st 
caller is leaving a...

Page 57

Useful Information
57For assistance, please visit http://www.panasonic.com/help
Liquid damage
Caution:
LTo avoid permanent damage, do not use a mi crowave oven to speed up the drying process.
I cannot connect my headset to 
the base unit.
L
Confirm that your headset is turned on.
L Only 1 headset can be connected at a time. Change the 
connection to your headset (page 48).
L If your headset is already  connected to another Bluetooth 
device such as your cellula r phone, disconnect the headset 
from your...

Page 58

Useful Information
58For assistance, please visit http://www.panasonic.com/help
FCC and other information
This equipment complies with Part 68 of the FCC rules 
and the requirements adopted by the ACTA. On the 
bottom of this equipment is a label that contains, 
among other information, a product identifier in the 
format US:ACJ----------.
If requested, this number must be provided to the 
telephone company.
L Registration No.............(found on the bottom of the unit)
L Ringer Equivalence No....

Page 59

Useful Information
59For assistance, please visit http://www.panasonic.com/help
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is 
no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct...

Page 60

Guía Rápida Española
60Para obtener ayuda, visite http://www.panasonic.com/help (sólo en inglés)
Guía Rápida Española
Instalación
Si está suscrito a un servicio de DSL/ADSL, añada un filtro de DSL/ADSL a la línea telefónica entre la unidad base y 
la toma de la línea telefónica. Consulte las instrucciones de operación para ver las conexiones.
Cómo conectar el adaptador para corriente
L Use sólo el adaptador de corriente Panasonic PQLV219 incluido.
(120 V CA, 60 Hz)
Gancho
Oprima firmemente 
el...
Start reading Panasonic Kx Tg9381 Operating Instructions Manual

Related Manuals for Panasonic Kx Tg9381 Operating Instructions Manual

All Panasonic manuals