Panasonic Kx Tgl460 Operating Instructions Manual

AlarmAn alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 14).
1 MMENU N#720
2 Mb N: Select the desired alarm.  a
M SELECT N
3 Mb N: Select the desired alarm option....

2Mb N: Select the desired setting.  a
M SAVE N
R If you select  “Off ”, press  MOFF N to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select  “AM ” or  “PM ”.  a  M OK N
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select  “AM ” or  “PM ”.
7 MSAVE N a  M OFF N
Changing the start and end time
1 MMENU N#237
2 Continue from step 3, “Turning silent
mode on/off”, page 41.
Selecting groups to bypass silent
mode
1MMENU N#241
2 Mb N: Select the desired...

nFrom the phonebook:
1 MMENU N#268
2 Mb N:  “On ” a  M SELECT N
3 Mb N: Select  “Outgoing call ” to
monitor from outside.  a M ADD N
4 Mb N:  “Phonebook ” a  M SELECT N
5 Mb N: Select the phonebook entry.  a
M SAVE N
R “Baby monitor ” will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1 MMENU N#268
2 Mb N:  “On ” a  M SELECT N
3 Mb N: Select  “Outgoing call ” to
monitor from outside....

nWhen monitoring from outside:
Answer the call.
If you want to respond from your monitoring
phone, press  #1 using tone dialing.
You can turn off the baby monitor feature
by pressing  #0.
Note:
R The unit disconnects the call
automatically after 2 minutes.
Other programming
Changing the handset name
The default handset name is  “Handset 1 ” to
“ Handset 6 ”. You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the...

Using Caller ID serviceImportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
RIf the unit cannot receive caller information,
the following is displayed:
–“Out of area ”: The caller dials...

4MCELL N
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 19).
5 Mb N: Select the desired cellular phone.  a
M SELECT N
n  Using a landline
1 ME N (Redial/CID)
R If the redial list is displayed, press  ME N
(Redial/CID) again to switch to the
caller list.
2 Press  MC N to search from the most recent
call, or  MD N to search from the oldest call.
3 To call back, press  M
/Z N.
To exit, press  MOFF...

Erasing selected caller
information
1ME N (Redial/CID)
R If the redial list is displayed, press  ME N
(Redial/CID) again to switch to the
caller list.
2 Mb N: Select the desired entry.
3 MERASE N a  M b N:  “Yes ” a  M SELECT N
a  M OFF N
Erasing all caller information
1 ME N (Redial/CID)
R If the redial list is displayed, press  ME N
(Redial/CID) again to switch to the
caller list.
2 MERASE N a  M b N:  “Yes ” a  M SELECT N
a  M OFF N
For assistance, please visit http://shop.panasonic.com/support47...

Copying phonebook from acellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R...

–“Trunk prefix ”: A trunk prefix; the initial
digit(s) to be dialed in a domestic call, prior
to the area code.
1 MMENU N
2 To store  “International code ”:
#117
To store  “Country code ”:  #118
To store  “Trunk prefix ”:  #119
3 Enter the desired number.  a M SAVE N
a  M OFF N
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Link to Cell app
For Android™ users
The free Link to Cell app helps you integrate
your Android phone with your DECT phone for
convenient...

–Handset:  “ Alert On/Off ” must be
turned on (page 50).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
*1 Turning on  [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s
[Settings]  app. a Tap  [Accessibility] .
a  Turn on the  [Accessibility]  and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device’s
[Settings]  app. a Tap...