Panasonic LCD Projector PT-LW25 Network Operating Instructions

Operating Instructions 
Network Operations
LCD Projector  Commercial Use
SO - LE4AC
Model No. PT-LX26HU/PT-LX30HU/PT-LW25HU 
P T- L X 2 6 H E / P T- L X 3 0 H E / P T- LW 2 5 H E 
P T- L X 2 6 H E A / P T- L X 3 0 H E A / P T- LW 2 5 H E A
  This manual explains the network operation of the projector.  
For information other than the network operation, such as the usage, inspection and replacement of parts, 
see “Operating Instructions - Projector Operations”.
ENGLISH 

2
Contents
The illustrations and screenshots in this manual may be different from those on your computer.
Expressions used in this document 
Pages to reference within this document are indicated as (See page ○○), and pages to reference in the 
supplemental “Operating Instructions - Projector Operations” are indicated as (See [○○] of the Projector 
Operations).
Request Regarding Security  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·...

3
Request Regarding Security
When using this product, security breaches of the type described below are conceivable.
Leakage of your private information via this product• 
Illegal operation of this product by a malicious third-party• 
Harm to or cessation of operation of this product by a malicious third-party• 
Be sure to implement sufficient security measures.
Set passwords, and limit the users that are permitted login access.• 
Make sure the password is as hard to guess as possible.• 
Change the...

4
Check your computer
Necessary environment for computers to be connected
First, check your computer to see whether or not it has a wired LAN•   function.       
“Glossary” (See page 24)
Before connecting the projector to the computer, be sure to check the following settings.• 
 Wired LAN
Check 1 For LAN cable
Is the cable properly connected?• 
Use LAN cable that is compatible with category 5 or above.• 
Check 2 Wired LAN settings

Is your wired LAN switched on?• 

Is your wired LAN adapter properly...

5
NETWORK menu
To connect the projector and the computer by changing the setting at the time of purchase, change the setting by 
displaying the menu with the following procedure. 
Displaying the NETWORK menu
Press the  button on remote control.1 The main menu appears.
Select [NETWORK] with the ▲▼ buttons.2 The network menu appears.
Press the  button.3 You can select the sub-menu item.
Unavailable items on the menu screen are grayed out and cannot be selected. 

6
NETWORK menu (continued)
Projector name 
You can change the projector name to be displayed on the network.
Press ▲▼ to select [Projector name], and press  button.       1                
  PT-LX26HE
Select characters with the ▲▼◄► buttons 2 and press the  button to enter the 
projector name.
Select [SET] with the ▲▼◄► buttons 3 and press the  button.                                          
Select [CANCEL] to undo the changes and then press the 
 button.
Select [YES] or [No] with the ▲▼◄► buttons and...

7
NETWORK menu (continued)
Network setup
You can make detailed wired LAN settings.
Press ▲▼ to select [Network setup], and press  button.1 The detailed [Network setup] screen will be displayed.
Press ▲▼ to select an item, and change the setting according to the instructions.2 
DHCP 
(DHCP client function)
On:If a DHCP server exists in the network to which the 
projector is connected, the IP address will automatically be 
acquired.
Off:If a DHCP server does not exist in the network to which 
the...

8
NETWORK menu (continued)
Network control
Set when you want to control the projector from a computer connected to the network.
Press ▲▼ to select [Network control].1 
Press  button or the ► button to select [On] or [Off] with the ▲▼ buttons.2 
Network status
This function shows the LAN setting environment of the currently selected projector. 
Press ▲▼ to select [Network status].1 
Press  button or the ► button to show the information of the current 2 projector status.  

9
NETWORK menu (continued)
Network factory default
You can reset the network setting to the factory default of the projector.
Press ▲▼ to select [Network factory default], and press  button.   1              
A confirmation box appears and select [Yes] and then press  button.  2 Another confirmation box appears and select [Yes] and then press  
button. 
Connecting with Wired LAN
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings...

10
Using Web Browser
Accessing from the Web browser
Activate the Web browser in the personal computer.1 
Enter the IP address set by the projector into the URL input field of the Web 2 b r ow s e r.
Enter your “User name” and “Password”.3 
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for 
the use name and panasonic (lowercase letters) for 
the password.
Click [OK] to display the Projector status 4 page.
“Projector status” page is displayed.
Avoid...