Panasonic LCD Projector Pt Vx41 Operating Instructions

ENGLISH - 11
Important 
 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
Color ...........................................................................\
..44
Tint  ..............................................................................44
Color temp. ...................................................................44
Red  ..............................................................................45
Green...

12 - ENGLISH
Important 
 
Information
Precautions for Use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impac\
ts.  z
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing \
so may damage the adjustable feet. z
Cautions when installing
Do not set up the projector outdoors. J
The projector is designed for indoor use only.  z
Do not use under...

Precautions for Use
ENGLISH - 13
Important 
 
Information
Cautions when setting the projectors J
 zDo not stack the projectors.
Do not block the ventilation ports (intake and exhaust) of the  z
projector.
Avoid heating and cooling air from the air conditioning system  z
directly blow to the ventilation ports (intake and exhaust) of the 
projector.
Do not place the projector in an enclosed space.  z
If you need to place the projector in an enclosed space, additional air \
conditioning and ventilation...

Precautions for Use
14 - ENGLISH
Important 
 
InformationCautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust por\
t or warm or cold air from an air  z
conditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
ENGLISH - 15
Important 
 
Information
Accessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the 
number of accessories.
Remote control unit (x1)
(6451048738)
Power cord (x1)
(6103580197)
CD-ROM (x1)
(6103609515)
Batteries (AAA/R03 type) 
(x2)
(for remote control unit)
RGB signal cable (x1) 
(6103580425)
Filter cover (x1)
(6103568881) 
AC power cord holder 
(x1) (6103573700) 
       (6103573694)
Lens cap (x1)
(6103527222)...

Precautions for Use
16 - ENGLISH
Important 
 
InformationContents of  JCD-ROM
The following contents are stored on the supplied CD-ROM.
Instructions/List (PDF)Software
Operating Instructions – Functional Manual 
Operation Manual Multi Projector Monitoring & Control Software 2.6 
Operation Manual Logo Transfer Software 2.0
List of compatible projector models
This is a list of projectors that are compatible with • 
the software (refer to the right column), and their 
restrictions.
 Multi Projector...

ENGLISH - 17
Preparation
About Your Projector
Remote control
(1)  Button
Execute the setting of Auto setup in the setting 
menu. (Æpage 51)
(2)  Input Selection Buttons: , 
 , , , 
, . 
These buttons are used to select the input signal. 
(Æpage 31)
(3) ▲▼◄► Buttons,  Button
Navigate the MENU display. (Æpage 35)
(4)  Button
Select a screen mode. (Æpage 47)
(5)  Button
Open or close the On-Screen Menu. (Æpage 35)
(6)  Button
     Pauses the projected image and sound tentatively. 
(Æpage 32)
(7)  Button...

About Your Projector
18 - ENGLISH
Preparation
(1) Remote control signal receiver
(2) Zoom Ring
      Adjust the zoom.
(3) Focus Ring
Adjust the focus.
(4) Projection Lens
(5) Air intake port 
(6) Control Panel and Indicators (Æpage 19)
(7) Lamp cover (Æpage 77)
     The lamp unit is located inside.
(8) Air outlet port
Hot air is exhausted from the exhaust vent. Do • 
not put heat-sensitive objects near this side.
(9) Speaker
(10) AC IN
(11) Terminals (Æpage 19)
(12) Air filter cover (Æpage 74)
(13)...

About Your Projector
ENGLISH - 19
Preparation
Rear terminals
Control panel 
(1) LAN
Connect to a LAN cable for network connection.
(2) HDMI
Connect to HDMI input signals.
(3) COMPUTER IN 1/ COMPONENT IN
Connect to COMPUTER IN 1/ COMPONENT IN 
input signals.
(4) COMPUTER IN 2/ MONITOR OUT
Connect to COMPUTER IN 2/ MONITOR OUT 
input signals or outputs the analog RGB signals 
input the projector.
(5) AUDIO OUT (VARIABLE)
     Output the audio signals input to the projector.
(6) Security slot
Attach the...

Using Remote control
20 - ENGLISH
Preparation
Using Remote control
Installing and Removing batteries
Open the cover1 ) Install batteries and close the cover2 ) 
(Insert the – side first.)
Remove the batteries in the reverse order of  z
installation. 
Setting Remote control ID numbers
When you use the system with multiple projectors, you can operate all th\
e projectors simultaneously or each 
projector individually using single remote control, if unique ID number is assigned to each projector.
After...