Panasonic LUMIX DMC LC33 User Manual

							Editing
61
[Multi copy setting]
1Press the [MENU] button.
2Press 3/4 to select [DPOF PRINT] 
and then press 1
.
3Press 3/4 to select [MULTI] and then 
press 1
.
4Press 2/1 to select the image.
5Press 3/4 to select the number of 
sheets to be printed.
 The number of sheets can be set from 1 
to 999.
6Repeat steps 4 and 5, and at the end 
press the [MENU] button 2 times.
 The DPOF setting of multi images is set 
at once.
 The menu will disappear.
[To cancel]
Set the number of sheets to 0 in step 5 of the 
[Multi copy setting].
 If the file is not based on the DCF standard, 
the DPOF setting cannot be set.
DCF is abbreviation of [Design rule for 
Camera File system], stipulated by JEITA 
[Japan Electronics and Information 
Technology Industries Association]. 
 When using the DPOF feature, this camera 
will overwrite any previous DPOF settings 
made by other products.
2,3,4,5 1,6
SINGLE
MULTI
CANCELINDEX
SETUPPLAY1/2
SELECT SETEXITMENU
2,3
PROTECTDPOF PRINTSLIDE SHOWAUDIO DUB.RESIZE
789
1011
DPOF SET MULTI
DPOF SET MULTI
SELECTEXITMENU
COUNT
3COUNT
789
1011
SELECTEXITMENU
5 4
KC52-PP.book  61 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Editing
62 [To cancel all settings] 
1Press the [MENU] button.
2Press 3/4 to select [DPOF PRINT] 
and then press 1
.
3Press 3/4 to select [CANCEL] and 
then press 1
.
4When this message is displayed 
“CANCEL ALL DPOF PRINT 
SETTINGS?”, press 2 to select [YES]
.
5Press the 4/[REVIEW/SET] button.
 All DPOF settings are cancelled.
6Press the [MENU] button.
 The menu will disappear.
[Index setting/to cancel] 
1Press the [MENU] button.
2Press 3/4 to select [DPOF PRINT] 
and then press 1
.
3Press 3/4 to select [INDEX] and then 
press 1
.
4When this message is displayed “SET 
INDEX PRINT?”, press 2 to select 
[YES].
 When the index is already set, the 
message A “SET/CANCEL INDEX 
PRINT?” is displayed.
 Press 2/1 to select [SET], [CANCEL] or 
[NO].
5Press the 4/[REVIEW/SET] button.
 All images are set/cancelled.
6Press the [MENU] button.
 The menu will disappear.
1,6 2,3,4,5
SETUPPLAY1/2
SINGLE
MULTI
INDEX
CANCEL
SELECT SETEXITMENU
2,3
PROTECTDPOF PRINTSLIDE SHOWAUDIO DUB.RESIZE
CANCEL ALL DPOF 
PRINT SETTINGS?
CANCEL ALL DPOF
YESNO
SELECTSET
4
SET INDEX PRINT? 
DPOF INDEX
YESNO
SELECTSET
SET/CANCEL INDEX
PRINT? 
DPOF INDEX
CANCEL SETNO
SELECTSET
KC52-PP.book  62 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Editing
63
Protecting Images on the Card
Using this feature, important photos can be 
protected from accidental deletion. This 
feature cannot protect photos or any data on 
the Card if the entire card is formatted.
[Preparation]
 Set the mode dial to playback [ ]. (P22)
[Single setting/to cancel]
1Press the [MENU] button.
2Press 3/4 to select [PROTECT] and 
then press 1
.
3Press 3/4 to select [SINGLE] and 
then press 1
.
4Press 2/1 to select 1 image.
5Press the 4/[REVIEW/SET] button.
 The protect icon 1 appears.
 By pressing 4/[REVIEW/SET] again, the 
protection is cancelled and the icon will 
disappear.
6Press the [MENU] button 2 times.
 The menu will disappear.
[Multi setting/To cancel, To cancel all 
settings]
1The method is the same as in “Writing 
the Print Information to the Card 
(DPOF Setting)”. (P60~P62)
 Formatting the card will erase all the data on the card, even if you protect the 
images in this procedure.
 When trying to delete a protected file, these messages are displayed “THIS 
PICTURE IS PROTECTED” or “PROTECTED PICTURES REMAIN 
UNDELETED”. If you want to delete this file, cancel the protect setting first.
 The protect setting may not be effective in other products.
 Sliding the SD Memory Card Write-Protect switch to [LOCK] prevents the picture 
from deletion even if the protection is not set.
 Audio dubbing cannot be used with protected images. (P66)
2,3,4,5 1,6
PROTECTDPOF PRINTSLIDE SHOW
SINGLE
MULTI
SETUPPLAY1/2
CANCEL
SELECT SET EXITMENU
2,3
4,5
SET/CANSEL SELECTEXIT
AUDIO DUB.RESIZE
PROTECT THIS
KC52-PP.book  63 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
64
Te c h n i c a l  u s e
Playing Back with Slide Show 
(Automatic Playback)
All pictures selected in the card can be played 
back one-by-one automatically.
[Preparation]
 Set the mode dial to playback [ ]. (P22)
1Press the [MENU] button.
2Press 3/4 to select [SLIDE SHOW] 
and then press 1.
3Press 3/4 to select [ALL]/[DPOF] and 
then press 1
.
 [ALL]: for playing back all pictures
 [DPOF]: for playing back the DPOF set 
pictures
4Press 3/4/2/1 for setting below.
 [DURATION]: It can be set among 1, 2, 3 
and 5 seconds.
 [AUDIO]: It can be set to [ON] or [OFF]. 
By setting it to [ON], it is possible to play 
back the still pictures with audio in slide 
show.
 [DPOF SET] (Only when setting to 
[DPOF]): You can select the pictures you 
want to set to the Slide Show.
 [CANCEL ALL] (Only when setting to 
[DPOF]): You can cancel the Slide Show 
setting.
5Press 3/4 to select [START].
6Press 1.
 The slide show starts.
 By pressing the [MENU] button, it stops.
1
2,3,4,5,6
PROTECT
DPOF
SLIDE SHOWALL
DPOF
SETUPPLAY1/2
SELECT SETEXITMENU
2,3
DPOF PRINT
AUDIO DUB.RESIZE
OFF
1 SEC.
START
DURATION
AUDIO
SELECT SETEXITMENU
4
START SLIDE SHOW
ALL SLIDE SHOW
STOP
6
MENU
KC52-PP.book  64 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
65
 In motion image playback, slide show is not available.
 The DPOF setting of slide show will not be applied to the DPOF printing.
 The setting time of the picture with audio is not reflected on [DURATION].
 Audio cannot be played back from this camera. Connect to a television to play back 
audio.
 When editing with the supplied software [SD Viewer for DSC] recorded on the 
CD-ROM, you can play back in SD slide show with this camera. (P90)
 Images that are set DPOF with the supplied software [SD Viewer for DSC] 
recorded on the CD-ROM cannot be played back in DPOF slide show with this 
camera. Set DPOF slide show on this camera.
 When using the DPOF feature, this camera will overwrite any previous DPOF 
settings made by other products.
KC52-PP.book  65 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
66
Adding Audio to Recorded Pictures 
(Audio Dubbing)
It is possible to add a 10-second narration to 
a recorded picture.
[Preparation]
 Set the mode dial to playback [ ]. (P22)
1Press the [MENU] button.
2Press 3/4 to select [AUDIO DUB.] and 
then press 1
.
3Press 2/1 to select the picture.
4Press the 4/[REVIEW/SET] button, to 
start audio recording
. (1Microphone)
 When audio has already been recorded, 
after the audio dubbing the original audio 
is overwritten.
 When audio has already been recorded, 
this message is displayed “OVERWRITE 
AUDIO DATA?”. Then press 2/1 to 
select [YES] and press the 
4/[REVIEW/SET] button, to start audio 
recording.
5Press the 4/[REVIEW/SET] button, to 
stop audio recording
.
 Even if you do not press the 
4/[REVIEW/SET] button, after about 10 
seconds the audio recording stops 
automatically.
6Press the [MENU] button 2 times.
 The menu will disappear.
 Adding audio will use additional memory. 
Using this feature will result in fewer images 
being able to be saved.
 The audio dubbing cannot be used with 
motion images.
 The audio dubbing cannot be used with 
protected images.
1,62,3,4,5
2048AUDIODUB.
SELECTSTARTMENUEXIT
3,42
PROTECT
SLIDE SHOW
SETUPPLAY1/2
SELECT SETEXITMENU
DPOF PRINT
AUDIO DUB.RESIZE
KC52-PP.book  66 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
67
Resizing Recorded Pictures
It is possible to reduce the recorded picture 
size. This function is useful if you want to 
reduce the volume of the picture for the 
purpose of attaching it to an e-mail or 
uploading it to a website.
[Preparation]
 Set the mode dial to playback [ ]. (P22)
1Press the [MENU] button.
2Press 3/4 to select [RESIZE] and then 
press 1.
3Press 2/1 to select the picture, and 
then press 4.
4Press 2/1 to select the size.
 : 1600a1200
 : 1280a960
 :   640a480
5Press the 4/[REVIEW/SET] button to 
set the size
.
6When this message is displayed 
“DELETE ORIGINAL PICTURE?”, 
press 2/1 to 
select [YES] or [NO].
7Press the 4/[REVIEW/SET] button.
8Press the [MENU] button 2 times.
 The menu will disappear.
 It is not possible to resize pictures in a size 
lower than /equal to [640a480] or with an 
aspect ratio that is not 4:3.
 It may not be possible to resize the pictures 
recorded with other equipment.
 It is not possible to resize a motion 
image/still picture with audio.
1,82,3,4,5,6,7
PROTECT
SLIDE SHOW
SETUPPLAY1/2
SELECT SETEXITMENU
2
DPOF PRINT
AUDIO DUB.RESIZE
2048
2048
RESIZE
RESIZE
RESIZE
SELECTSETMENUEXIT
6
3
4
2048
1600
SELECTSET
RESIZEEXITMENU
DELETE ORIGINALPICTURE?
YESNO
SELECT
KC52-PP.book  67 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
68
Trimming Recorded Pictures
It is possible to cut off the unnecessary parts 
of the picture (trimming), and enlarge the 
remaining parts of the picture.
[Preparation]
 Set the mode dial to playback [ ]. (P22)
1Press the [MENU] button.
2Press 3/4 to select [TRIMMING] and 
then press 1.
3Press 2/1 to select the picture, and 
then press 4
.
4Rotate the zoom lever towards [ ] to 
make subject appear closer, and 
towards [ ] to make subjects appear 
further away.
5Press 3/4/2/1 to shift pictures.
6Press the shutter button to set.
2,3,5,7,8
4
6
1,9
WT
2
SETUPPLAY2/2
SELECT SETEXITMENU
TRIMMINGFORMAT
TRIMMING
MENUEXIT
4,5,62048
ZOOM
TRIM:SHUTTER
TRIMMING2048
SELECTSETMENUEXIT
3
KC52-PP.book  68 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
69
7When this message is displayed 
“DELETE ORIGINAL PICTURE?”, 
press 2/1 to select [YES] or [NO].
8Press the 4/[REVIEW/SET] button.
9Press the [MENU] button 2 times.
 The menu will disappear.
 Trimming images will use additional memory 
if the original image is saved.
 It is not possible to resize pictures in a size 
lower than [640a480] or with an aspect ratio 
that is not 4:3.
 You cannot operate trimming on pictures 
recorded with other equipment.
 Trimming is not possible for a motion 
image/still picture with audio.
 The picture size of the trimmed pictures may 
become smaller than that of the original one 
depending on the cut size.
 The picture quality of the trimmed picture 
becomes inferior.
TRIMMING
DELETE ORIGINAL
PICTURE?
YESNO
7
SELECTSET
KC52-PP.book  69 ページ  ２００３年３月１３日　木曜日　午後２時２９分 
						

							Technical use
70
Formatting the Card
Usually, it is not necessary to format the card 
(initializing). Format the card when this 
message is displayed “MEMORY CARD 
ERROR”.
 If the card has been formatted by a PC or 
other equipment, format the card on the 
camera again.
[Preparation]
 Set the mode dial to playback [ ]. (P22)
1Press the [MENU] button.
2Press 3/4 to select [FORMAT] and 
then press 1.
3When this message is displayed 
“DELETE ALL DATA ON THE MEMORY 
CARD?”, press 2/1 to select [YES].
4Press the 4/[REVIEW/SET] button.
 The card is formatted.
 After formatting, recorded images and 
any other data cannot be recovered.
 When formatting, use the batteries which the remaining power is enough or AC 
adaptor (optional, DMW-AC1).
 During formatting, do not turn the power off.
 If the card cannot be formatted, consult your dealer.
1 2,3,4
SETUPPLAY2/2
SELECT SETEXITMENU
2
TRIMMINGFORMAT
DELETE ALL DATA 
ON THE MEMORY CARD?
FORMAT
YESNO
SELECTSET
3
For USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected]         
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca 
 
KC52-PP.book  70 ページ  ２００３年３月１３日　木曜日　午後２時２９分