Panasonic Multi Control Hub Aw Hb605 Operating Instructions

Before attempting to connect, operate or adjust this product, please
read these instructions completely.
P
O
W
E
ROFFON
Multi Control Hub AW–
Multi Control Hub
Model AW- P 

3 2
indicates safety information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR  BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to...

5 4
For Your SafetyOUse the dedicated AC adapter (AW-PS505) to supply power to the multi control hub.
OHandle with care.
The multi control hub may malfunction if it is dropped or exposed to strong shocks.
OUse within a temperature range of 14°F to 113°F (–10°C to +45°C).
Using the multi control hub in environments colder than 14°F (–10°C) or hotter than
113°F (+45°C) could have a damaging effect on the internal components.
OConnect and disconnect cables only when the power is turned off.
Make sure to...

7 6
Controls and Their Functions
PREVIEW OUT
CAM CONT IN5
PAN/TILT
CONTROL IN
BLACK
BURST OUT
PREVIEW OUT
CAM CONT IN4
PAN/TILT
CONTROL IN
BLACK
BURST OUT
PREVIEW OUTTO CONTROL PANEL TO PAN/TILT HEAD HUBCAM CONT IN3
PAN/TILT
CONTROL IN
BLACK
BURST OUT
PREVIEW OUT
CAM CONT IN2
PAN/TILT
CONTROL IN
BLACK
BURST OUT
PREVIEW OUT
CAM CONT IN1
PAN/TILT
CONTROL IN
BLACK
BURST OUTBLACK
BURST
OUT
PREVIEW IN
CAM CONT OUTPAN/TILT
CONTROL OUT
+ -
DC12V IN
9
8
4
57
;
:
6
3
3
DC +12 V Input Connector [DC12 V IN]
(4-pin...

9 8
Controls and Their Functions:
Camera Control Signal Input
Connector [TO CONTROL PANEL
CAM CONT IN] (BNC Connector)
Connect this connector to the camera
control signal output connector [TO
CAMERA PAN/TILT HEAD CAMERA
CONTROL OUT] of the hybrid control
panel (AW-RP501), or to the camera
control signal output connector [TO
CAMERA PAN/TILT HEAD CAMERA
CONTROL OUT] of the multi hybrid
control panel (AW-RP505) using a
coaxial cable (5C-2V equivalent).
If the system incorporates a pan/tilt
control panel...

11 10
System Connections 
(Indoor Pan/tilt Head System)
OTurn off the power to all pieces of
equipment before making any
connections.
OFor the control panel, use the AC
adapter model AW-PS301 (sold
separately), for the multi port hub and
multi control hub, the AC adapter model
AW-PS505 (sold separately), and for the
pan/tilt head AC adapter model, the AW-
PS300 (sold separately).
OUse an AW-PH300 series pan/tilt head
and a camera from the convertible
camera series.
Use camera cable AW-CA50 T15 (sold...

13 12
MENUOPT CN CARD
VIDEO OUT
LF REMCTEGL NDC12V INIRIS TEM AWC
YES ABCNO BARO    I
PREVIEW OUT
CAM CONT IN5PAN/TILT
CONTROL IN
BLACK
BURST OUTPREVIEW OUT
CAM CONT IN4PA N / T I LT
CONTROL IN
BLACK
BURST OUTPREVIEW OUTTO CONTROL PANEL TO PAN/TILT HEAD HUBCAM CONT IN3PAN/TILT
CONTROL IN
BLACK
BURST OUTPREVIEW OUT
CAM CONT IN2PAN/TILT
CONTROL IN
BLACK
BURST OUTPREVIEW OUT
CAM CONT IN1PAN/TILT
CONTROL IN
BLACK
BURST OUTBLACK
BURST
OUTPREVIEW IN
CAM CONT OUTPA N / T I LT
CONTROL OUT
+ -DC12V IN
O...

15 14
MENUOPT CN CARD
VIDEO OUT
LF REMCTEGL NDC12V INIRIS TEM AWC
YES ABCNO BARO    I
PREVIEW OUT
CAM CONT IN5PA N / T I LT
CONTROL IN
BLACK
BURST OUTPREVIEW OUT
CAM CONT IN4PAN/TILT
CONTROL IN
BLACK
BURST OUTPREVIEW OUTTO CONTROL PANEL TO PAN/TILT HEAD HUBCAM CONT IN3PAN/TILT
CONTROL IN
BLACK
BURST OUTPREVIEW OUT
CAM CONT IN2PAN/TILT
CONTROL IN
BLACK
BURST OUTPREVIEW OUT
CAM CONT IN1PAN/TILT
CONTROL IN
BLACK
BURST OUTBLACK
BURST
OUTPREVIEW IN
CAM CONT OUTPAN/TILT
CONTROL OUT
+ -DC12V IN
O    I
O    I...

POWER
1
YC2
YC3
YC4
YC5
YC
OFF ON
CABLE  COMP
Multl  Port  Hub  AW-H8505
O    I
O    I
POWER
OFF ON
17 16
Operations1.
Turn the power on.
Turn on the power control switches of
the AC adapters of the pan/tilt heads
and control panels, as well as the AC
adapter and power control switch of the
multi control hub.
If the system incorporates a multi port
hub, turn on the power control switch of
the multi port hub and the power switch
of its AC adapter.
2.
Press the button on the priority
switchbox connected to...

19 18
SpecificationsPower supply:
DC +12 V (4-pin Cannon Connector)
Power consumption:
DC 12 V, 0.47 AVideo input:
Composite video 1 V [p-p] 75 Ωa
1
(BNC connector)
Camera control inputs:
Control signal (BNC connector) a
5
Pan/tilt head control inputs:
Control signal (RJ-45 8-pin modular
jack) a
5
Preview video outputs:
Composite video 1 V [p-p] 75 Ωa
5
(BNC connector)
Black burst outputs:
75 Ωa
6 (BNC connector)
Camera control output:
Control signal (BNC connector)
Pan/tilt head control output:
Control...