Panasonic Network Camera Recorder BB-HNP60 Operating Instructions

							Operating Instructions
11
1.2 Network Camera Recorder Installation
1.2.1 Looking at Installation Procedure
You must perform the following steps to use Network Camera Recorder.
Read the End-User License Agreement. (  page 2) 
You cannot install Network Camera Recorder if you disagree.
(The legal agreement is required when installing Network Camera Recorder.)
Install Network Camera Recorder. (  page 13)
Perform the user registration. (  page 18)
Without the user registration, the number of Network Cameras that can be 
configured are only four, and Network Camera Recorder cannot be used beyond 
the limitation of 30 minutes. Enter the registration code and the password.
Select the folder to save images. (  page 20)
Configure the Network Camera. (  page 33)
Use Network Camera Recorder. 
						

							Operating Instructions
12
1.2.2 Checking Included Accessories
The following items are provided.
 CD-ROM
 Operating Instructions
 End-User License Agreement
 Registration code stickers*— 1 pc.
— 1 pc.
— 1 pc.
— 1 set (3 pc.)
* User registration requires registration code shown on registration code 
stickers. Affix the stickers to the case, the front or the back of Operating 
Instructions to remember registration code and password.  
						

							Operating Instructions
13
1.2.3 Installing Network Camera Recorder
1.
Insert the CD-ROM to the CD-ROM drive.
 Installation Selection window automatically appears.
Notes
 If Installation Selection window does not appear, open ncr folder on 
the CD-ROM and double-click ncrsetup_en.exe file. Installation 
window appears.
 Clicking [Install Network Camera Viewer] starts installing Network 
Camera Viewer.
 Adobe
® Acrobat® Reader® software allows you to read Operating 
Instructions on a PC. To install it, click [Install Adobe Acrobat 
Reader].
2.Click [Install Network Camera Recorder].
 Installation window appears. 
						

							Operating Instructions
14
3.Click [Next>].
 License Agreement window appears.
4.Check [I Agree] and click [Next>].
 Choose Destination Location window appears.
Click [Browse] to change the destination folder and choose the 
destination.
 Confirm that the hard disk capacity is 600 MB or greater.
 The level of the folder-hierarchy depth must be within six to prevent the 
system from getting unstable. 
						

							Operating Instructions
15
5.Click [Next>].
 Start Installation window appears.
6.Click [Next>].
 Installation Complete window appears. 
						

							Operating Instructions
16
7.Click [Finish].
 Installation has finished completely.
 Network Camera Recorder Icon appears on the desktop.
8.Click [Exit] to close Installation Selection window.
1.2.4 Uninstalling Network Camera Recorder
If you do not need Network Camera Recorder, uninstall it.
1.Select [Start]  [Program]  [NCR]  [Uninstall Panasonic Network 
Camera Recorder].
2.Follow the steps on the windows.
Note
When performing version upgrade of Network Camera Recorder, uninstall by 
checking [Automatic] before installing a new version. Camera definitions and 
recorded images will not be deleted. 
						

							Operating Instructions
17
1.3 How to Start and Close Network Camera 
Recorder
1.Double-click the Network Camera Recorder Icon on the desktop.
 Network Camera Recorder screen appears.
2.Select [File]  [Exit] on the menu bar.
Notes
 Several Network Camera Recorders cannot be activated simultaneously.
 You can also start by selecting [Start]  [Program] [NCR] 
[Panasonic Network Camera Recorder]. 
						

							Operating Instructions
18
1.4 User Registration
Without the user registration, the number of Network Cameras that can be 
configured are only four, and Network Camera Recorder cannot be used beyond 
the limitation of 30 minutes. Operate the user registration entering the registration 
code and the password.
1.Start Network Camera Recorder and select [Help]  [How to Register...].
 How to Register window appears.
2.Click [Browse to Registration Page].
 User Registration web site appears.
3.Follow the instructions on the web site, enter each required parameter, and 
click [Register].
Notes
 If User Registration web site does not appear, access the web site below:
http://www.comm-9.com/registration/app/index.php
 Registration code is shown on registration code stickers.
 Make a note of the password to the registration code stickers. Password is 
required in Step 4, and is also sent by e-mail. 
						

							Operating Instructions
19
4.Select [Help]  [Enter Registration Code...].
 Enter Registration Information window appears.
5.Enter the registration code and the password. Click [OK].
 Information dialog box appears.
6.Click [OK] and restart Network Camera Recorder.
Notes
 When the registration code and password are wrong, Error dialog box 
appears. Reenter them correctly.
[Enter Registration Code] at the [Help] menu turns to [Revert to 
Unregistered] when completing the registration. Select [Revert to 
Unregistered] to revert to the unregistered state. 
						

							Operating Instructions
20
1.5 Folder Selection to Save the Image
Network Camera Recorder can save images to the hard disk. It can also save 
images to the external memory device specifying the folder. You can configure 
new Network Cameras creating subfolders. (  page 33)
Notes
 If the folder is not specified, the folders are made for each Network Camera 
automatically and save images in the specified folder.
 When setting the Automatic Backup (  page 49), it is recommended to select 
a new folder to save images. Because all data in a specified folder is copied.
Creating a new folder
1.Start Network Camera Recorder and select [File]  [Select Camera 
Database] on the menu bar.
 Select camera database folder window appears.