Panasonic Network Camera Recorder BB-HNP60 Operating Instructions

							Operating Instructions
71
3.5 Creating AVI Motion Video Files
JPEG files can be converted to AVI files. This allows the files to be played back on 
other PCs or send via e-mail.
1.Click Camera Preview in the Camera List to select Network Camera.
 The frame of the selected Camera Preview turns blue.
2.Click [Thumbnails] tab.
 Thumbnails Page appears.
3.Click recorded images to select.
 To select several images, click the JPEG files while pressing [Shift] key or 
[Ctrl] key. Be sure to choose over four JPEG files.
4.Select [Tools]  [Save Selected Images as AVI File] on the menu bar.
 Save AVI File window appears. 
						

							Operating Instructions
72
5.Specify [Save in] and [File name] and click [Save].
 The compression program varies depending on the operating system. 
Select a compression program that is installed on the PC.
 Compression quality specifies the compression ratio. (If the compression 
ratio is 100, the file size will be small, but the image quality will be low.
6.Click [OK].
 If you click [Cancel], the AVI file will be created. The created AVI file is not 
available because it is not compressed correctly.
Notes
 When you play back the AVI file, you need the same compression 
program. Different compression program does not play back the AVI file.
 The following compression programs or the like are installed in standard 
Windows operating system. 
 Cinepak Codec by Radius
Intel
® Indeo® Video R3.2
 Microsoft Video1
Sets the compression program. 
The window may be different 
depending on the operating system.
Click [About...] to display the version
number of the compression program. 
						

							Operating Instructions
73
3.6 Renaming and Saving the Image
Network Camera Recorder can rename and save images.
1.Select a image to rename and save.
 The image can be one that is already recorded or one that is being 
displayed currently.
2.Select [File]  [Save Current Image].
3.Specify a folder and a filename and click [Save]. 
						

							Operating Instructions
74
3.7 Copying to the Clipboard
Network Camera Recorder copies the image to the Clipboard.
1.Select a image to copy to the Clipboard.
 The image can be one that is already recorded or one that is being 
displayed currently.
2.Select [File]  [Copy Image to Clipboard].
 The current displayed image will be copied to the clipboard. You can use 
this data in another application.
 A filename can also be copied to the clipboard by selecting [Copy Image 
Filename to Clipboard].
Note
The Clipboard is the place that keeps the copied or cut data temporarily. 
						

							Operating Instructions
75
3.8 Confirming the Version Information
Network Camera Recorder shows you the version information.
1.Select [Help]  [About].
2.Click [OK] after confirming the version information. 
						

							Operating Instructions
76
Section 4
Default Setting and 
Troubleshooting 
						

							Operating Instructions
77
4.1 Default Setting List
ItemsFactory 
Default valueWhen setting 
is necessaryNote
[Select 
Camera 
Database]Specified 
FolderC:\Program 
Files\NCRWhen setting 
the specified 
folder–
[Create 
New 
Camera]/
[Edit 
Current 
Camera]Camera TypePanasonic 
HCM series 
with Pan/TiltDepending on 
the Network 
Camera–
IP address[Blank] Indispensable IP address consists 
of four decimal 
numbers (0 to 255).
(E.g., 
192.168.0.253)
Camera NameCam***
(Network 
Camera 
Recorder 
assigns a 
number 
automatically 
in ***.)Indispensable Camera name is 
maximum 250 
characters including 
the path name such 
as C:\Program 
Files[13 
characters]. 
Camera name is 
attached to the 
folder name.
Description[Blank]
–Maximum 128 
characters
Resolution320 x 240 Indispensable –
Image QualityStandard Indispensable – 
						

							Operating Instructions
78
[Create 
New 
Camera]/
[Edit 
Current 
Camera]Capture TypeMotion Image Indispensable Specify the interval 
for still image. 
Default is one 
second.
Recording File 
FormatMJP Indispensable
–
RecordingOff Indispensable –
Timer 
OperationStart 0 h 0 min
Stop 23 h 59 
min
When using 
Timer 
Recording.Check [Automatic 
Timer Operation] 
on the menu bar to 
timer-record. Day of the 
week[No check]
Recording 
Ty p eMotion Detect
Use 
Authentication[No check]
When using 
authentication 
of Network 
Camera.Enter the same user 
ID and password of 
Network Camera. User Name (ID)[Blank]
Password[Blank]
Recording 
Capacity[No check] When limiting 
the hard disk 
capacityWhen limiting the 
hard disk capacity, 
select [Overwrite] or 
[Stop camera] when 
the capacity 
reaches.
[Proxy 
Setup]Use a proxy 
server[No check]
When using a 
proxy server– Proxy address[Blank]
Port8080
Proxy 
Username[Blank]
Proxy 
password[Blank] ItemsFactory 
Default valueWhen setting 
is necessaryNote 
						

							Operating Instructions
79
ItemsFactory 
Default valueWhen setting 
is necessaryNote
[Preferences] Show Icon 
in System 
Tra y[No check] When showing 
the icon in 
System Tray–
Stop 
cameras if 
disk space 
less than[Checked] 
Less than 500 
MB FreeWhen limiting 
hard disk 
capacity–
Start all 
cameras 
when 
program 
starts[No Check] When starting 
all cameras 
when program 
starts–
Automatic 
Backup[No Check] When backing 
up recorded 
images–
[Search] Search for 
ImagesIn the last 1 
day
When 
searching 
recorded 
images– Target File 
FormatJPG and MJP 
are checked
Search 
ResultsFilename
[Installation] The 
destination 
folderC:Program 
Files\NCRWhen installing 
Network 
Camera 
Recorder–
[Page Setup] Rows and 
ColumnsOne row and 
one columnWhen printing 
images– 
						

							Operating Instructions
80
4.2 Troubleshooting
Problem Cause and Remedy
Camera images are not 
displayed. Network Camera is not working.
Try to connect to Network Camera directly using a 
web browser. This will verify if Network Camera is 
working correctly.
 Network Camera is turned off.
Turn on Network Camera.
 The invalid IP address of Network Camera is set. 
Set the available IP address on Edit Camera 
window.
 The authentication is set for Network Camera.
Check Use Authentication check box and enter 
User Name (ID) and Password:.
 The network is going down.
Confirm the network parameters of the PC.
 The network congestion is interfering.
Network Camera Recorder may not display the 
images immediately.
 The proxy server may prevent you from connecting 
directly to Network Camera.
Set the proxy settings on Proxy Settings window 
selecting [File]  [Proxy Setup] on the menu 
bar.
The images of Network 
Cameras on the Camera 
Bar does not appear. The images of Network Cameras are sticking out of 
the display.
Broaden the display of the Camera Bar.