Panasonic Portable Navigation System Cn Gp50u Operating Instructions

							3.1.7 Incoming call 
If you receive incoming call, the screen will show the 
message ( figure 22 ). 
  : Accept incoming call ( figure 23 ). 
  : You can adjust the volume level. 
 : ( Show map ): The map opens. 
When the map is displayed while talking over the telephone, 
the
  button is displayed in the map.   
The telephone can be hung up by pushing the 
button in the map. 
  : Disconnect the incoming call ( figure 24 ). 
figure 22 
figure 23 
figure 24 
11 
						

							3.2 Pairing 
3.2.1 Preparation
Turn on the power of the mobile phone that will pair this unit 
and then set it to standby mode.   
Note
Refer to the Operating Instructions of the mobile phone 
regarding its operation. 
3.2.2 Find Other Phone 
1 Tap Phone
 button on MENU window. 
•PHONE MENU window is displayed. 
2  Tap Find Other Phone
 button. (figure 8) 
•  Start a search for Bluetooth supported devices in the 
area of this unit. 
•  After completing the search, a list of Bluetooth 
supported devices are displayed (up to 5 items). 
3  Select the Mobile phone that you want to pair from the 
list.(figure 25) 
 • REGISTERING window is displayed. (figure 26) 
4  Search for this unit from the mobile phone and then 
input the Bluetooth pass key.   
• Name: Strada 
•  Bluetooth pass key: 0000 
5  Confirm the message and then tap OK
 button.   
•  If “The mobile phone has been registered You can 
talk hands-free” is displayed, pairing has been 
completed normally and the Bluetooth supported 
device has been connected to this unit.   
 (figure 27) 
•  If “Unable to register the mobile phone” is displayed, 
pairing has failed. Try to establish pairing again from 
procedure 1.(figure 28) 
figure 8 
figure 25 
figure 26 
figure 27 
figure 28 
12 
						

							3.2.3 Connect   
This unit remembers previously paired Bluetooth supported 
devices (up to 5 devices in reverse chronological order). 
These devices can simply connect without the search and 
authentication process.   
1 Tap Connect
 button from PHONE MENU window. 
W¸  A list of previously paired Bluetooth supported 
devices are displayed.   
2  Select the mobile phone that you want to pair from the 
list.(figure 29) 
3  Confirm the message and then tap OK
 button.   
W¸  If “The mobile phone has been registered You can 
talk hands-free” is displayed, the Bluetooth 
supported device has been connected to this unit. 
W¸  If “Unable to register the mobile phone” is displayed, 
the connection failed. Try to establish pairing again 
from procedure 1. 
figure 8 
figure 29 
13