Panasonic Projector Pt L735ntu Operating Instructions

							ENGLISH-31
Useful functions
Wireless mouse
You can use the remote control as a personal computermouse. Set the Mode
(Projector/Computer) switch on the remote control unit to 
“Computer”and
connect the projector’s USB port to 
a personal computercounterpart with the
accessory USB cable.
Page
buttons
FGIHbutton
Click button R-CLICK button
Mode switch
(Computer/Projector)
Mode switch (Computer/Projector)
Move the mode switch to the
“Computer” position.
BPage buttons
^: Functions as the Page Up
button on 
a personal computer
keyboard.
v: Functions as the Page Down
button on 
a personal computer
keyboard.
BArrow (F FG
GI
IH
H
) buttons
These buttons can move the
cursor on 
a personal computer’s
screen as the 
personal computer
mouse.
BR-CLICK button
This button functions as the right
button on 
a personal computer
mouse.
BClick button
This button functions as the left
button on 
a personal computer
mouse.Projector
Accessory USB cable
C
omputerequipped with a USB port
AUTO SETUPLASER
MENU VIDEO
Computer
PAGE
ENTER
R-CLICK
FREEZE
SHUTTER
Projector
FUNC1STD RGB POWER
NOTE:
BThe optional wireless mouse receiver (ET-RMRC2) is needed when the
projector and personal computers are placed where they cannot be
connected with the accessory USB cable. B
For Windows (Versions 98SE, Me, 2000 and XP), you can use the
standard mouse driver which comes bundled with the operating
system. 
						

							32-ENGLISH
32
32
32
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
PICTURE menu (page 37)
When an RGB signal is being 
input
On-screen menus
Menu screens
The various settings and adjustments for this projector can be carried out by
selecting the operations from on-screen menus.
The general arrangement of these menus is shown below.
32
32
32
 6 32
 0
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When a YPBPRsignal is being input
AUTO1 32
32
32
 6 32
 0
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
TV-SYSTEM
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When an S-VIDEO/VIDEO signal is
being input
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
When the NETWORK/SD CARD is
selected. (PT-L735NTU only)
NOTE:
BThe onscreen displays in these operating instructions are for the 
PT-L735NTU.
BKeystone distortion of the on-screen display will not be corrected. 
						

							ENGLISH-33
Adjustments and settings
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
POSITION menu (page 40)
When an RGB signal is being input
POSITIONPOSITION
KEYSTONE
OSD POSITION
ASPECT
RESIZING
AUTO SETUP
STANDARDH:   64    V:   16
H:    0    V:    0
OFFON TOP LEFT
4:3
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When a YPBPRsignal is being input
POSITIONPOSITION
KEYSTONE
OSD POSITION
ASPECT
RESIZING
AUTO SETUP
STANDARDH:   32    V:   16
H:    0    V:    0
OFFON TOP LEFT
AUTO
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When an S-VIDEO/VIDEO signal is
being input
POSITIONKEYSTONE
OSD POSITION
AUTO SETUP
STANDARDH:    0    V:    0
TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When the NETWORK/SD CARD is
selected (PT-L735NTU only)
AUDIOVOLUME
MUTE
AUDIO MODEOFFON 20
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU] VOICENORMAL
AUDIO menu (page 44)
LANGUAGE
SELECT:[^][@][{][}]
SELECT:[{][}]ESC:[MENU]
ENTER:[ENTER]
ENGLISH
DEUTSCH
FRANÇAISESPAÑOL
ITALIANO
LANGUAGE menu (page 44) 
						

							34-ENGLISH
OPTIONOSD
AUTO SEARCH
AUTO SIGNAL
AUTO KEYSTONE
RGB2 SELECT
RGB/YP
BPRVGA60/525P
BLACKBORD
BACK COLOR
NEXT PAGE @OFF
OFF
OFF
OFF
INPUT
RGB
VGA60
OFF
BLUEON
ON
ON
ON
OUTPUT
YPBPR525P
ON
BLACK
SELECT:[^][@]
ADJUST:[{][}] ESC:[MENU]
OPTION menu (page 45)
10 H
OPTIONPREVIOUS PAGE ^
FRONT/REAR
DESK/CEILING
FAN CONTROL
LAMP POWER
LAMP RUN TIME
FUNC1
CONTROL KEY
AUTO POWER OFF   FRONT
DESK
STANDARD
LOW
MUTE
OFFREAR
CEILING
HIGH
HIGH
KEYSTONE
ON
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]DISABLE
OFF
OFF
OFF
VIEWERON
ON
ON
WEB
NETWORK
NETWORK
EASY CONNECT
HOSTNAME
WEB CONTROL
WEB STANDBY
WEB PASSWORD
SD MODELAN1
SELECT:[^][@]
Ð
T¦á§¦à§ENTER:[ENTER]
ESC:[MENU] PANASONIC L735NT
NETWORK menu (page 48)
(PT-L735NTU only)
INVALID
OFF
OFFVALID
ON
ONSECURITY
PASSWORD SETTING
CHANGE PASSWORD
TEXT DISPLAY
CHANGE TEXT
LOGO DISPLAY
LOGO CLEAR
LOGO CAPTURE
SELECT:[^][@][{][}]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]
SECURITY menu (page 49)
SD CARDAUTOPLAY
REPEAT
INTERVALOFFON
1
5 sec
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
SD CARD menu (page 48)
(PT-L735NTU only)
The RGB/YPBPRitem is displayed
when an RGB/YP
BPRsignal is
being input. 
						

							ENGLISH-35
Adjustments and settings
#Press the MENU button.
The menu screen will be displayed.
$
Press the I I
or H H
arrow buttons to select a menu.
The selected menu screen will then be displayed.
(Example: POSITION menu)
%Press theG Garrow button to accept the selection.
You can select an item here. The selected item is
shown in yellow.
Projector control panel
Menu operation guide
32
32
32
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}] ESC:[MENU]
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
NOTE:
BPress the MENU
button to return to
the previous
screen.
LASER
MENU VIDEO
PAGE
ENTER
R-CLICK
FREEZE
SHUTTER
FUNC1STD RGB POWER
AUTO SETUP 
						

							36-ENGLISH
&Select an item pressing the F F
or G G
buttons. 
AFor the value adjusting items
Press the ENTER button to
display an individual adjustment
screen.
Press the Ior Hbuttons to
adjust the setting.
You can also adjust the bar-scale
items pressing the Ior H
buttons in the menu screen.
Some items can be adjusted by
pressing the For Gbuttons.
BFor the selective items
Select the setting by pressing the
Ior Hbuttons.
CFor the fixed items
Press the ENTER button, and the
function will work.Returning a setting to
the factory default
If you press the STD (standard)
button on the remote control unit,
you can return settings to the
factory default settings. However,
the operation of this function varies
depending on which screen is being
displayed.
B
When a menu screen is being
displayed
All items displayed will be returned
to their factory default settings.
BWhen an individual adjustment
screen is being displayed
Only the item displayed will be
returned to the factory default
setting.
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
ABC
DOT CLOCK32
POSITIONH:
V:128
32
RESIZINGOFFON
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
DOT CLOCK32
NOTE:
BYou can also select
STANDARD from the menu
screen and then press the
ENTER button. 
						

							ENGLISH-37
Adjustments and settings
Select the item pressing the For G
buttons on the remote control unit or
the projector.
Press the Ior Hbuttons to set the
selective items. For the value
adjusting items, press the ENTER
button to display an individual
screen, and press the Ior H
buttons to adjust the setting.
Adjusting the picture
NATURAL
STANDARD
DYNAMIC
BLACKBOARD
PICTURE MODE
32
32
32
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
When an RGB signal is being 
input
32
32
32
 6 32
 0
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When a YPBPRsignal is being input
AUTO1 32
32
32
 6 32
 0
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
TV-SYSTEM
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When an S-VIDEO/VIDEO signal is being input
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
When the NETWORK/SD CARD is selected
Select the picture mode that best matches
the image source and room conditions.
The mode best used in dark rooms is
NATURAL. For rooms having regular lighting
conditions in use, select STANDARD. For
exceptionally bright rooms, use DYNAMIC.
BLACKBOARD is available only when
BLACKBOARD in the OPTION menu is set
to ON. Select BLACKBOARD when
projecting onto blackboards. 
						

							38-ENGLISH
CONTRAST
This adjusts the contrast of the
picture. Press the Hbutton to make
the picture brighter, and press the
Ibutton to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the Ibutton if black areas are
too light (grey rather than black).
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
Press the Hbutton to make the
color more vivid in tone, and press
the Ibutton to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture. Press the Hbutton to make
flesh tones more greenish, and
press the Ibutton to make the
flesh tones more reddish.
SHARPNESS
Press the Hbutton to make the picture
details sharper, and press the Ibutton
to make the picture details softer.
Color Hue Setting
(COLOR TEMP.)
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
Noise Reduction (NR)
(When S-VIDEO/VIDEO/YPBPR
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction).
To strengthen the effect, press the H
button. To turn it off , set to “0” by
pressing the Ibutton.
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. Press the Ibutton to
make the selected color lighter.
Press the Hbutton to make the
selected color stronger.
TV-SYSTEM
(S-VIDEO/VIDEO only)
AUTO1
The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2
The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
STANDARD
HIGH
LOW
AUTO1
AUTO2
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM 
						

							ENGLISH-39
Adjustments and settings
Projecting sRGB-
compatible pictures
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following settings.
# #
Press the F F 
 
or G G 
 
button to
select “PICTURE MODE”, and
then use theI I 
 
or H H 
 
button to
select “NATURAL”.
$ $
Press the F F 
 
or G G 
 
button to
select “COLOR TEMP.”, and
then use theI I 
 
or H H 
 
button to
select “STANDARD”.
% %
Press the STD (standard)
button on the remote control
unit.
& &
Select the LAMP POWER item
in the OPTION menu by
pressing the F F
or G G
buttons
and set to “HIGH” by pressing
the I I
or H H
buttons.
NOTE:
BsRGB is only enabled when
RGB signals are being input .
NOTE:
BThis should normally be set to
“AUTO1” or “AUTO2”. If the
signal is of such poor quality
that the correct format cannot
be automatically distinguished,
change the setting manually to
the required TV system. 
						

							40-ENGLISH
Select the item pressing the For G
buttons on the remote control unit or
the projector.
Press the Ior Hbuttons, to adjust
the alternative items. For the
numerically adjustable items, press
the ENTER button to display an
individual screen, and press the I
or Hbuttons to adjust the setting.
Some items can be adjusted
pressing the For Gbuttons.
POSITION
Moves the picture position.
Press the Ior Hbuttons to move the
picture horizontally.
Press the For Gbuttons to move the
picture vertically.
Adjusting the position
When the input signal is RGB, first
press the AUTO SETUP button to
initiate automatic positioning. 
If the optimum setting is not obtained
when AUTO SETUP is carried out,
adjust by the following procedure.
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When an RGB signal is being input
POSITIONPOSITION
KEYSTONE
OSD POSITION
ASPECT
RESIZING
AUTO SETUP
STANDARDH:   32    V:   16
H:    0    V:    0
OFFON TOP LEFT
AUTO
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When an S-VIDEO/VIDEO signal is
being input
POSITIONKEYSTONE
OSD POSITION
AUTO SETUP
STANDARDH:    0    V:    0
TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When the NETWORK/SD CARD is
selected
POSITIONPOSITION
KEYSTONE
OSD POSITION
ASPECT
RESIZING
AUTO SETUP
STANDARDH:   64    V:   16
H:    0    V:    0
OFFON TOP LEFT
4:3
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
When a YPBPRsignal is being input.
POSITIONH:
V:128
32