Panasonic Projector PT-LX351 Specifications
Have a look at the manual Panasonic Projector PT-LX351 Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 1
1/11
Product Name : DLP™Projector
S
PECFILE
Product Number : PT-
LX351
As of August 2013. Specifications and appearance are subject to change w\
ithout notice.
SFD13M012-1](http://img.usermanuals.tech/thumb/58/101596/w64_projector_spec_7943_d-0.png "Page 1
1/11
Product Name : DLP™Projector
S
PECFILE
Product Number : PT-
LX351
As of August 2013. Specifications and appearance are subject to change w\
ithout notice.
SFD13M012-1")
![Page 5
SPECFILE
DLP™Projector
5/11
PT-LX351
As of August 2013
SFD13M012-1
unit : mm (inch)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKV100H and attachment
ET-PKL300B.
This illustration is not drawn to scale.
Caution:
All construction work should be done by a qualified technician.
When mounting to the ceiling, use the special mounting bracket. Furtherm\
ore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting...](http://img.usermanuals.tech/thumb/58/101596/w64_projector_spec_7943_d-4.png "Page 5
SPECFILE
DLP™Projector
5/11
PT-LX351
As of August 2013
SFD13M012-1
unit : mm (inch)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKV100H and attachment
ET-PKL300B.
This illustration is not drawn to scale.
Caution:
All construction work should be done by a qualified technician.
When mounting to the ceiling, use the special mounting bracket. Furtherm\
ore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting...")
![Page 7
SPECFILE
DLP™Projector
7/11
PT-LX351
As of August 2013
SFD13M012-1
List of compatible signals
The signals that can be input to this projector are shown in the table be\
low.
Display mode Display
resolution
(dots)
1
Scanning frequency
H
(kHz) V
(Hz)Dot clock
frequency
(MHz) Format
720 × 480i
720 × 576i
720 × 480i
720 × 576i 720 × 483
720 × 576
1280 × 720
1920 × 1080i
1920 × 1080
640 × 480
800 × 600 15.7
15.6
15.7
15.7
15.6
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
31.5
35.0
37.5
37.9
43.3
35.1...](http://img.usermanuals.tech/thumb/58/101596/w64_projector_spec_7943_d-6.png "Page 7
SPECFILE
DLP™Projector
7/11
PT-LX351
As of August 2013
SFD13M012-1
List of compatible signals
The signals that can be input to this projector are shown in the table be\
low.
Display mode Display
resolution
(dots)
1
Scanning frequency
H
(kHz) V
(Hz)Dot clock
frequency
(MHz) Format
720 × 480i
720 × 576i
720 × 480i
720 × 576i 720 × 483
720 × 576
1280 × 720
1920 × 1080i
1920 × 1080
640 × 480
800 × 600 15.7
15.6
15.7
15.7
15.6
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
31.5
35.0
37.5
37.9
43.3
35.1...")
![Page 9
SPECFILE
DLP™Projector
9/11
PT-LX351
As of August 2013
SFD13M012-1
* STX and ETX are character chords. STX is 02 and ETX is 03 when expressed\
in hexadecimal.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
CAUTION
It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this
occurs, wait for 60 seconds, then try...](http://img.usermanuals.tech/thumb/58/101596/w64_projector_spec_7943_d-8.png "Page 9
SPECFILE
DLP™Projector
9/11
PT-LX351
As of August 2013
SFD13M012-1
* STX and ETX are character chords. STX is 02 and ETX is 03 when expressed\
in hexadecimal.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
CAUTION
It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this
occurs, wait for 60 seconds, then try...")
![Page 11
SPECFILE
DLP™Projector
11/11
PT-LX351
As of August 2013
SFD13M012-1
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation.\
Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust
openings. In addition to this space, also ensure that there is a sufficient work space for removing
and...](http://img.usermanuals.tech/thumb/58/101596/w64_projector_spec_7943_d-10.png "Page 11
SPECFILE
DLP™Projector
11/11
PT-LX351
As of August 2013
SFD13M012-1
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation.\
Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust
openings. In addition to this space, also ensure that there is a sufficient work space for removing
and...")
SPECFILE DLP™Projector 11/11 PT-LX351 As of August 2013 SFD13M012-1 Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation.\ Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust openings. In addition to this space, also ensure that there is a sufficient work space for removing and installing the lamp, air filter and other parts. 3. Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro- jector so that cool or hot air from other air conditioning equipment does not flow directly toward the projector’s air intake or exhaust openings. 4. Do not install the projector in an enclosed space. If it is necessary to install it in an enc\ losed space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the intake opening. This may cause the projector’s protective circuit to interrupt projector operation. Direction of air intake and exhaust 500 mm (19-11/16) or more 500 mm (19-11/16) or more 1000 mm (39-3/8) or more Intake Exhaust Operating the projector continuously 1. If the projector is to be operated continuously 22 hours or more, lamp replacement cycle duration becomes shorter. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods (one hour or less). Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. DLP and the DLP logo are trademarks of Texas Instruments. P HDMI, the HDMI logo and High-Definition Multimedia Interface are tradema\ rks or registered trademarks of HDMI Licensing LLC in the United States and other countries. JLink is a registered trademark, or a trademark application has been filed, in Japan, the U\ nited States, and other countries an d regions. All other trademarks are the property of their respective trademark owners.