Panasonic Projector Pt Rw330u Operating Instructions
Have a look at the manual Panasonic Projector Pt Rw330u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
Chapter 4 Settings — [NETWORK] menu
96 - ENGLISH
[Access error] page
Click [Status] → [Access error].
The error log on the WEB server is displayed such as access to the pages\
that do not exist or access with unauthorized user names or
passwords.
[Mail error] page
Click [Status] → [Mail error].
Displays email error information if the system fails to send periodic em\
ails.
Note
f [Access error]/[Mail error] will display the recent few hundred accesses/requests. May be unable to display all...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-95.png "Page 96
Chapter 4 Settings — [NETWORK] menu
96 - ENGLISH
[Access error] page
Click [Status] → [Access error].
The error log on the WEB server is displayed such as access to the pages\
that do not exist or access with unauthorized user names or
passwords.
[Mail error] page
Click [Status] → [Mail error].
Displays email error information if the system fails to send periodic em\
ails.
Note
f [Access error]/[Mail error] will display the recent few hundred accesses/requests. May be unable to display all...")
![Page 97
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 97
[Advanced control] page
Click [Projector control] → [Advanced control].
1
2
1 [POSITION]
Operates items related to angle of view. 2 [PICTURE]
Operates items related to image quality.
[Network config] page
Click [Detailed set up]
→ [Network config].
f Click [Network config] to display the [CAUTION!] screen.
fClick the [Next] button to display the current settings.
fThe following setting change screen is displayed by clicking the [Change\
] button.
1
2...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-96.png "Page 97
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 97
[Advanced control] page
Click [Projector control] → [Advanced control].
1
2
1 [POSITION]
Operates items related to angle of view. 2 [PICTURE]
Operates items related to image quality.
[Network config] page
Click [Detailed set up]
→ [Network config].
f Click [Network config] to display the [CAUTION!] screen.
fClick the [Next] button to display the current settings.
fThe following setting change screen is displayed by clicking the [Change\
] button.
1
2...")
![Page 98
Chapter 4 Settings — [NETWORK] menu
98 - ENGLISH
[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1
2
3 4
1 [Input IP address]
Enter the IP address of the server to be tested.
2
[Submit]
Executes the connection test. 3
Example of display when the connection has succeeded
4
Example of display when the connection has failed
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
45
6
7...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-97.png "Page 98
Chapter 4 Settings — [NETWORK] menu
98 - ENGLISH
[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1
2
3 4
1 [Input IP address]
Enter the IP address of the server to be tested.
2
[Submit]
Executes the connection test. 3
Example of display when the connection has succeeded
4
Example of display when the connection has failed
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
45
6
7...")
![Page 99
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 99
[E-mail set up] page
When there is a problem, an email can be sent to preset email addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [Enable] to use the E-mail function.
2
[SMTP SER
VER NAME]
Enter the IP address or the server name of the E-mail server
(SMTP). To enter the server name, the setup of the DNS server
is required.
3
[MAIL FROM]
Enter the E-mail address of the projector
. (Up to 63...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-98.png "Page 99
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 99
[E-mail set up] page
When there is a problem, an email can be sent to preset email addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [Enable] to use the E-mail function.
2
[SMTP SER
VER NAME]
Enter the IP address or the server name of the E-mail server
(SMTP). To enter the server name, the setup of the DNS server
is required.
3
[MAIL FROM]
Enter the E-mail address of the projector
. (Up to 63...")
![Page 100
Chapter 4 Settings — [NETWORK] menu
100 - ENGLISH
11
10
9
9 [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail addresses
are to be used.
Leave it blank when two E-mail addresses are not to be used.
10
Settings of the conditions to send E-mail
Select the conditions to send E-mail to the second E-mail
address.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
An E-mail message is sent when an error occurred in the self-
diagnosis. [INT
AKE AIR TEMPERATURE]:
An E-mail...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-99.png "Page 100
Chapter 4 Settings — [NETWORK] menu
100 - ENGLISH
11
10
9
9 [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail addresses
are to be used.
Leave it blank when two E-mail addresses are not to be used.
10
Settings of the conditions to send E-mail
Select the conditions to send E-mail to the second E-mail
address.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
An E-mail message is sent when an error occurred in the self-
diagnosis. [INT
AKE AIR TEMPERATURE]:
An E-mail...")
![Page 101
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 101
Contents of mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been establis\
hed.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : RW330
Serial No : SW1234567
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPERATURE Over [ 46 degC / 114 degF ]
ERROR [ ON ]
INTAKE AIR TEMPERATURE [ OFF ]
PERIODIC...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-100.png "Page 101
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 101
Contents of mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been establis\
hed.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : RW330
Serial No : SW1234567
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPERATURE Over [ 46 degC / 114 degF ]
ERROR [ ON ]
INTAKE AIR TEMPERATURE [ OFF ]
PERIODIC...")
![Page 102
Chapter 4 Settings — [NETWORK] menu
102 - ENGLISH
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type : RW330
Serial No : SW1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
INTERNAL AIR TEMPERATURE [ OK ]
LIGHT STATUS [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-101.png "Page 102
Chapter 4 Settings — [NETWORK] menu
102 - ENGLISH
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type : RW330
Serial No : SW1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
INTERNAL AIR TEMPERATURE [ OK ]
LIGHT STATUS [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [...")
![Page 103
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 103
User name [Change password] page
Click [Change password].
1
2
3
1 [Administrator]
Used to change the setting of [Administrator].
2
[User]
Used to change the setting of [User]. 3
[Next]
Used to change the setting of the password.
[Administrator] account
1
2
3
4
5
6
7
1 [Account]
Displays the account to change.
2
[Current][User name]
Enter the user name before the change.
3
[Current][Password]
Enter the current password.
4
[New][User name]
Enter the...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-102.png "Page 103
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 103
User name [Change password] page
Click [Change password].
1
2
3
1 [Administrator]
Used to change the setting of [Administrator].
2
[User]
Used to change the setting of [User]. 3
[Next]
Used to change the setting of the password.
[Administrator] account
1
2
3
4
5
6
7
1 [Account]
Displays the account to change.
2
[Current][User name]
Enter the user name before the change.
3
[Current][Password]
Enter the current password.
4
[New][User name]
Enter the...")
![Page 104
Chapter 4 Settings — [NETWORK] menu
104 - ENGLISH
[User] account
1
2
3
5 4
1 [Account]
Displays the account to change.
2
[New][User name]
Enter the desired new user name. (Up to 16 characters in single
byte) 3
[New][Password]
Enter the desired new password. (Up to 16 characters in single
byte)
4
[New][Password(Retype)]
Enter the desired new password again.
5
[OK]
Determines the change of password.
[Change password] (for user rights)
Only the change of password is enabled under the user rights.
1
2...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-103.png "Page 104
Chapter 4 Settings — [NETWORK] menu
104 - ENGLISH
[User] account
1
2
3
5 4
1 [Account]
Displays the account to change.
2
[New][User name]
Enter the desired new user name. (Up to 16 characters in single
byte) 3
[New][Password]
Enter the desired new password. (Up to 16 characters in single
byte)
4
[New][Password(Retype)]
Enter the desired new password again.
5
[OK]
Determines the change of password.
[Change password] (for user rights)
Only the change of password is enabled under the user rights.
1
2...")
![Page 105
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 105
[CRESTRON RoomView] page
The projector can be monitored and/or controlled with RoomView.
To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the
[CRESTRON RoomView] button is not displayed on the web control screen.)
The control page of RoomView is displayed by clicking [CRESTRON RoomView].
It is not displayed if Adobe Flash Player is not installed on the computer used, or...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-104.png "Page 105
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 105
[CRESTRON RoomView] page
The projector can be monitored and/or controlled with RoomView.
To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the
[CRESTRON RoomView] button is not displayed on the web control screen.)
The control page of RoomView is displayed by clicking [CRESTRON RoomView].
It is not displayed if Adobe Flash Player is not installed on the computer used, or...")
![Page 106
Chapter 4 Settings — [NETWORK] menu
106 - ENGLISH
[Info] page
Click [Info] on the control page.
45
6
7
1
2
3
8
1 [Projector Name]
Displays the projector name.
2
[Mac Address]
Displays the MAC address.
3
[Lamp Hours]
Displays the cumulative operating time (converted value) of the
projector.
4
[Power Status]
Displays the status of the power. 5
[Source]
Displays the selected image input.
6
[Lamp Mode]
Displays the light source mode.
7
[Error Status]
Displays the error status.
8
[Exit]
Returns to the...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-105.png "Page 106
Chapter 4 Settings — [NETWORK] menu
106 - ENGLISH
[Info] page
Click [Info] on the control page.
45
6
7
1
2
3
8
1 [Projector Name]
Displays the projector name.
2
[Mac Address]
Displays the MAC address.
3
[Lamp Hours]
Displays the cumulative operating time (converted value) of the
projector.
4
[Power Status]
Displays the status of the power. 5
[Source]
Displays the selected image input.
6
[Lamp Mode]
Displays the light source mode.
7
[Error Status]
Displays the error status.
8
[Exit]
Returns to the...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 101 Contents of mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been establis\ hed. === Panasonic projector report(CONFIGURE) === Projector Type : RW330 Serial No : SW1234567 ----- E-mail setup data ----- TEMPERATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEMPERATURE Over [ 46 degC / 114 degF ] ERROR [ ON ] INTAKE AIR TEMPERATURE [ OFF ] PERIODIC REPORT Sunday [ ON ] Monday [ ON ] Tuesday [ ON ] Wednesday [ ON ] Thursday [ ON ] Friday [ ON ] Saturday [ ON ] 00:00 [ ON ] 01:00 [ ON ] 02:00 [ ON ] 03:00 [ ON ] 04:00 [ ON ] 05:00 [ ON ] 06:00 [ ON ] 07:00 [ ON ] 08:00 [ ON ] 09:00 [ ON ] 10:00 [ ON ] 11:00 [ ON ] 12:00 [ ON ] 13:00 [ ON ] 14:00 [ ON ] 15:00 [ ON ] 16:00 [ ON ] 17:00 [ ON ] 18:00 [ ON ] 19:00 [ ON ] 20:00 [ ON ] 21:00 [ ON ] 22:00 [ ON ] 23:00 [ ON ] ----- check system ----- MAIN CPU BUS [ OK ] FAN [ OK ] INTAKE AIR TEMPERATURE [ OK ] OPTICS MODULE TEMPERATURE [ OK ] INTERNAL AIR TEMPERATURE [ OK ] LIGHT STATUS [ OK ] INTAKE AIR TEMP.SENSOR [ OK ] OPTICS MODULE TEMP.SENSOR [ OK ] INTERNAL AIR TEMP.SENSOR [ OK ] BATTERY [ OK ] PHOSPHOR WHEEL [ OK ] (Error code 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00) Intake air temperature :[ 18 degC / 64 degF ] Optics module temperature :[ 30 degC / 86 degF ] Internal air temperature :[ 28 degC / 82 degF ] PROJECTOR RUNTIME 9 H -------- Current status -------- MAIN VERSION 1.00 NETWORK VERSION 1.00 SUB VERSION 1.00 POWER STATUS POWER=STANDBY INPUT SIGNAL DVI-D SIGNAL NAME XGA60 SIGNAL FREQUENCY 48.36kHz / 60.00H ----- Wired Network configuration ----- DHCP Client OFF IP address 192.168.0.8 MAC address 04:20:9A:00:00:00 Mon Jul 05 14:11:29 2012 ----- Memo -----
Chapter 4 Settings — [NETWORK] menu 102 - ENGLISH Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : RW330 Serial No : SW1234567 ----- check system ----- MAIN CPU BUS [ OK ] FAN [ OK ] INTAKE AIR TEMPERATURE [ OK ] OPTICS MODULE TEMPERATURE [ OK ] INTERNAL AIR TEMPERATURE [ OK ] LIGHT STATUS [ OK ] INTAKE AIR TEMP.SENSOR [ OK ] OPTICS MODULE TEMP.SENSOR [ FAILED ] INTERNAL AIR TEMP.SENSOR [ OK ] BATTERY [ OK ] PHOSPHOR WHEEL [ OK ] (Error code 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00) Intake air temperature :[ 18 degC / 64 degF ] Optics module temperature :[ 30 degC / 86 degF ] Internal air temperature :[ 28 degC / 82 degF ] PROJECTOR RUNTIME 9 H -------- Current status -------- MAIN VERSION 1.00 NETWORK VERSION 1.00 SUB VERSION 1.00 POWER STATUS POWER=STANDBY INPUT SIGNAL DVI-D SIGNAL NAME XGA60 SIGNAL FREQUENCY 48.36kHz / 60.00H ----- Wired Network configuration ----- DHCP Client OFF IP address 192.168.0.8 MAC address 04:20:9A:00:00:00 Mon Jul 05 14:11:29 2012 ----- Memo ----- [ECO management set up] page You can make settings for the ECO management function of the projector. Click [Detailed set up] → [ECO management set up]. 1 2 3 4 5 6 7 1 [LIGHT POWER] Select the light source power setting. 2 [AUTO POWER SA VE] Select [ON] to set [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [AV MUTE DETECTION]. 3 [AMBIENT LIGHT DETECTION] Enable ([ON])/disable ([OFF]) the ambient light detection function. 4 [SIGNAL DETECTION] Enable ([ON])/disable ([OFF]) the signal detection function. 5 [AV MUTE DETECTION] Enable ([ON])/disable ([OFF]) the AV mute detection function. 6 [NO SIGNAL SHUT -OFF] Select the time until the projector enters the standby mode when the signal detection function is used. 7 [Submit] Update the setting. Note f For detailed description of each setting item, refer to the [PROJECTOR SETUP] menu of the projector → [ECO MANAGEMENT] ( x page 70).
Chapter 4 Settings — [NETWORK] menu ENGLISH - 103 User name [Change password] page Click [Change password]. 1 2 3 1 [Administrator] Used to change the setting of [Administrator]. 2 [User] Used to change the setting of [User]. 3 [Next] Used to change the setting of the password. [Administrator] account 1 2 3 4 5 6 7 1 [Account] Displays the account to change. 2 [Current][User name] Enter the user name before the change. 3 [Current][Password] Enter the current password. 4 [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) 5 [New][Password] Enter the desired new password. (Up to 16 characters in single byte) 6 [New][Password(Retype)] Enter the desired new password again. 7 [OK] Determines the change of password.
Chapter 4 Settings — [NETWORK] menu 104 - ENGLISH [User] account 1 2 3 5 4 1 [Account] Displays the account to change. 2 [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) 3 [New][Password] Enter the desired new password. (Up to 16 characters in single byte) 4 [New][Password(Retype)] Enter the desired new password again. 5 [OK] Determines the change of password. [Change password] (for user rights) Only the change of password is enabled under the user rights. 1 2 4 3 1 [Old Password] Enter the current password. 2 [New Password] Enter the desired new password. (Up to 16 characters in single byte) 3 [Retype] Enter the desired new password again. 4 [OK] Determines the change of password. Note f To change the account of the administrator, you must enter the [Current] [User name] and [Password].
Chapter 4 Settings — [NETWORK] menu ENGLISH - 105 [CRESTRON RoomView] page The projector can be monitored and/or controlled with RoomView. To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the [CRESTRON RoomView] button is not displayed on the web control screen.) The control page of RoomView is displayed by clicking [CRESTRON RoomView]. It is not displayed if Adobe Flash Player is not installed on the computer used, or the browser\ used does not support Flash. In that case, click [Back] on the control page to go back to the previous page. Control page 1 2 3 4 5 6 7 1 [Tools][Info][Help] Tabs for selecting the setting, information, or help page of the projector. 2 [POWER] Switches the power on/off. 3 [VOL DOWN]/[A V MUTE]/[VOL UP] Operate the volume/AV mute. These operations are not available when the power of the projector is turned off. 4 [Input Select] Controls input selection. Not available when the power of the projector is turned off. 5 Menu screen control buttons Navigates the menu screen. 6 Freeze/image quality adjustment Controls items related to freeze/image quality. 7 [Back] Performs return to the previous page. [Tools] page Click [Tools] on the control page. 1 2 3 4 5 1 [Control System] Set the information required for communicating with the controller to be connected with the projector. 2 [User Password] Set the user rights password for the RoomView control page. 3 [Admin Password] Set the administrator rights password for the RoomView control page. 4 Network Status Displays the settings of wired LAN. [DHCP] Displays the current setting. [IpAddress] Displays the current setting. [SubnetMask] Displays the current setting. [DefaultGateway] Displays the current setting. [DNSServer] Displays the current setting. 5 [Exit] Returns to the control page.
Chapter 4 Settings — [NETWORK] menu 106 - ENGLISH [Info] page Click [Info] on the control page. 45 6 7 1 2 3 8 1 [Projector Name] Displays the projector name. 2 [Mac Address] Displays the MAC address. 3 [Lamp Hours] Displays the cumulative operating time (converted value) of the projector. 4 [Power Status] Displays the status of the power. 5 [Source] Displays the selected image input. 6 [Lamp Mode] Displays the light source mode. 7 [Error Status] Displays the error status. 8 [Exit] Returns to the control page. [Help] page Click [Help] on the control page. The [Help Desk] window is displayed. 1 1 [Help Desk] Messages can be sent to or received from an administrator who uses Crestron RoomView .
Chapter 4 Settings — [DIGITAL LINK] menu ENGLISH - 107 [DIGITAL LINK] menu On the menu screen, select [DIGITAL LINK] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. Switch the input to DIGITAL LINK. Note fWhen the optional digital interface box (Model No.: ET-YFB100G) is connected to the terminal, the main menu of ET-YFB100G is displayed. Refer to the user manual supplied with ET-YFB100G for details. f When a twisted-pair-cable transmitter of other company is connected to t\ he projector, the main menu of the projector is displayed.
108 - ENGLISH Chapter 5 Maintenance This chapter describes inspection when there are problems, and maintenan\ ce methods.
Chapter 5 Maintenance — Light source/temperature indicator ENGLISH - 109 Light source/temperature indicator Managing the indicated problems If a problem should occur inside the projector, the light source indicator /temperature indicator will i\ nform you by lighting or flashing. Check the status of the indicators and manage the indicated problems as \ follows. Attention fWhen switching off the projector to deal with problems, make sure to follow the procedure in “Switching off the projector” ( x page 34). fCheck the status of the power supply with the power indicator . ( x page 32) /LJKWVRXUFHLQGLFDWRU /,*+7!3RZHULQGLFDWRU 21 * 67$1%
Chapter 5 Maintenance — Light source/temperature indicator 110 - ENGLISH Temperature indicator Indicator statusLighting in redFlashing in red (1 time) Flashing in red (2 time) Flashing in red (3 time) Status Warm-up status Internal temperature is high (warning).Internal temperature is high (during projection).Internal temperature is high (standby warning). The fan has stopped. Cause f Did you turn on the power when the room temperature was low (about 0 °C (32 °F))? f Is the air intake/exhaust port blocked? fIs the room temperature high? ― Solution f Wait at least five minutes in the current status. fInstall the projector in a location with an ambient temperature of 0 °C (32 °F) to 45 °C (1 13 °F)*1. fRemove any objects that are blocking the air intake/exhaust port. fSet up the projector in a location with an ambient temperature of 0 °C (32 °F) to 45 °C (1 13 °F)*1, and a humidity of 20 % to 80 % (no condensation). f Do not use the projector at high elevations 2 700 m (8 858') or higher above sea level. fSet the switch to ( x page 34), and consult your dealer . *1 When using the projector at high altitudes (1 400 m (4 593') – 2 700 m (8 858') above sea level), the ambient temperature will be 0 °C (32 °F) – 40 °C (104 °F). Note f If the temperature indicator is still lit or flashing after taking the preceding measures, ask your dealer to repair the projector .