Panasonic Projector Pt Rw330u Operating Instructions
Have a look at the manual Panasonic Projector Pt Rw330u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
Chapter 6 Appendix — Technical information
116 - ENGLISH
Control commands via LAN
When web control administrator rights password is set (Protect mode)
Connecting
1) Obtain the IP address and port number (Initial set value = 1024) of the projector a\
nd request for a
connection to the projector.
fYou can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Obtain from the main menu
→ [NETWORK]
→ [NETWORK STATUS]
Port number Obtain from the main menu
→...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-115.png "Page 116
Chapter 6 Appendix — Technical information
116 - ENGLISH
Control commands via LAN
When web control administrator rights password is set (Protect mode)
Connecting
1) Obtain the IP address and port number (Initial set value = 1024) of the projector a\
nd request for a
connection to the projector.
fYou can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Obtain from the main menu
→ [NETWORK]
→ [NETWORK STATUS]
Port number Obtain from the main menu
→...")
![Page 117
Chapter 6 Appendix — Technical information
ENGLISH - 117
rError response
Character string
DetailsTermination
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2”
Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4 bytes ―1 byte
When web control administrator rights password is not set (Non-protect \
mode)
Connecting
1) Obtain the IP address and port number (Initial set value =...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-116.png "Page 117
Chapter 6 Appendix — Technical information
ENGLISH - 117
rError response
Character string
DetailsTermination
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2”
Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4 bytes ―1 byte
When web control administrator rights password is not set (Non-protect \
mode)
Connecting
1) Obtain the IP address and port number (Initial set value =...")
![Page 118
Chapter 6 Appendix — Technical information
118 - ENGLISH
rError response
Character string
DetailsTermination
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2”
Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4 bytes ―1 byte
terminal
The terminal of the projector conforms with RS-232C so that the project\
or can be connected to and controlled from a computer.
Connection...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-117.png "Page 118
Chapter 6 Appendix — Technical information
118 - ENGLISH
rError response
Character string
DetailsTermination
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2”
Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4 bytes ―1 byte
terminal
The terminal of the projector conforms with RS-232C so that the project\
or can be connected to and controlled from a computer.
Connection...")
![Page 119
Chapter 6 Appendix — Technical information
ENGLISH - 119
Communication conditions (Factory default)
Signal levelRS-232C-compliant
Sync. method Asynchronous
Baud rate 9
600 bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None
Basic format
Transmission from the computer starts with STX, then the ID, command, par\
ameter, and ETX are sent in this order. Add parameters according
to the details of control.
E\WHV ,FKDUDFWHUV E\WHV 6HPLFRORQ
E\WH &RORQ
E\WH...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-118.png "Page 119
Chapter 6 Appendix — Technical information
ENGLISH - 119
Communication conditions (Factory default)
Signal levelRS-232C-compliant
Sync. method Asynchronous
Baud rate 9
600 bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None
Basic format
Transmission from the computer starts with STX, then the ID, command, par\
ameter, and ETX are sent in this order. Add parameters according
to the details of control.
E\WHV ,FKDUDFWHUV E\WHV 6HPLFRORQ
E\WH &RORQ
E\WH...")
![Page 120
Chapter 6 Appendix — Technical information
120 - ENGLISH
Cable specification
1& 1&
1& 1&
1& 1&
1& 1&
:KHQFRQQHFWHGWRDFRPSXWHU
3URMHFWRU 6(5,$/,1!
WHUPLQDO &RPSXWHU 7(VSHFLILFDWLRQV
Control command
The following table lists the commands that can be used to control the p\
rojector using a computer.
r
Projector control command
Command Details Parameter/response
character string Remark (parameter)
PON Power on ―To check if the power is on, use the...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-119.png "Page 120
Chapter 6 Appendix — Technical information
120 - ENGLISH
Cable specification
1& 1&
1& 1&
1& 1&
1& 1&
:KHQFRQQHFWHGWRDFRPSXWHU
3URMHFWRU 6(5,$/,1!
WHUPLQDO &RPSXWHU 7(VSHFLILFDWLRQV
Control command
The following table lists the commands that can be used to control the p\
rojector using a computer.
r
Projector control command
Command Details Parameter/response
character string Remark (parameter)
PON Power on ―To check if the power is on, use the...")
![Page 123
Chapter 6 Appendix — Specifications
ENGLISH - 123
Specifications
The following table describes the specifications of the projector.
Model No.PT-RZ370U PT-RW330U
Power supply AC 100 V - 240 V 50 Hz/60 Hz
Power consumption 460 W (5.2 A - 2.0 A)
0.5 W when [STANDBY MODE] is set to [ECO]
8 W when [STANDBY MODE] is set to [NORMAL] (when fan is stopped)
DLP chips Panel size
16.5 mm (0.65") (aspect ratio 16:9) 16.5 mm (0.65") (aspect ratio 16:10)
Display method 1-unit DLP chips, DLP type
Number of...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-122.png "Page 123
Chapter 6 Appendix — Specifications
ENGLISH - 123
Specifications
The following table describes the specifications of the projector.
Model No.PT-RZ370U PT-RW330U
Power supply AC 100 V - 240 V 50 Hz/60 Hz
Power consumption 460 W (5.2 A - 2.0 A)
0.5 W when [STANDBY MODE] is set to [ECO]
8 W when [STANDBY MODE] is set to [NORMAL] (when fan is stopped)
DLP chips Panel size
16.5 mm (0.65\") (aspect ratio 16:9) 16.5 mm (0.65\") (aspect ratio 16:10)
Display method 1-unit DLP chips, DLP type
Number of...")
![Page 124
Chapter 6 Appendix — Specifications
124 - ENGLISH
Model No.PT-RZ370U PT-RW330U
Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projection screen size 1.02 m (40") - 7.62 m (300")
Screen aspect ratio 16:916:10
Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Terminal terminal
1 set, high-density D-Sub 15
p (female)
RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HDTTL
high impedance, automatic positive/negative
polarity...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-123.png "Page 124
Chapter 6 Appendix — Specifications
124 - ENGLISH
Model No.PT-RZ370U PT-RW330U
Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projection screen size 1.02 m (40\") - 7.62 m (300\")
Screen aspect ratio 16:916:10
Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Terminal terminal
1 set, high-density D-Sub 15
p (female)
RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HDTTL
high impedance, automatic positive/negative
polarity...")
![Page 126
Chapter 6 Appendix — Ceiling mount bracket safeguards
126 - ENGLISH
Ceiling mount bracket safeguards
fWhen installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (Model No.: ET
-PKR100H (for high ceilings),
ET-PKR100S (for low ceilings)).
f When installing the projector, attach the drop-prevention kit included with the ceiling mount bracket\
.
fRequest for a qualified technician to do the installation.
fTakes no responsibility for any damage to the projector...](http://img.usermanuals.tech/thumb/58/94710/w64_panasonic-pt-rw330u-manual_d-125.png "Page 126
Chapter 6 Appendix — Ceiling mount bracket safeguards
126 - ENGLISH
Ceiling mount bracket safeguards
fWhen installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (Model No.: ET
-PKR100H (for high ceilings),
ET-PKR100S (for low ceilings)).
f When installing the projector, attach the drop-prevention kit included with the ceiling mount bracket\
.
fRequest for a qualified technician to do the installation.
fTakes no responsibility for any damage to the projector...")
Chapter 6 Appendix — Technical information ENGLISH - 121 List of compatible signals The following table specifies the types of signals compatible with the projector . fSignals that show formats are as follows. gV: V ideo gR: RGB gY: YCBCR/YPBPR gD: DVI-I gH: HDMI Mode Resolution (Dots) Scanning frequency Dot clock freq. (MHz) Format Plug and play *1 Horizontal (kHz) Vertical (Hz) COMPUTER/ DVI-I Analog EDID DVI-I digital HDMI/ DIGITAL LINK EDID1 EDID2 EDID3 NTSC/NTSC4.43/ PAL-M/PAL60 720 x 480i 15.7 59.9 ―V ― ― ― ― ― PAL/PAL-N/SECAM 720 x 576i 15.6 50.0 ―V ― ― ― ― ― 525i (480i) 720 x 480i 15.7 59.9 13.5 R/Y ― ― ― ― ― 625i (576i) 720 x 576i 15.6 50.0 13.5 R/Y ― ― ― ― ― 525p (480p) 720 x 483 31.5 59.9 27.0 R/Y/D/H ― l― l l 625p (576p) 720 x 576 31.3 50.0 27.0 R/Y/D/H ― l― l l 750 (720)/60p 1 280 x 720 45.0 60.0 74.3 R/Y/D/H ― l― l l 750 (720)/50p 1 280 x 720 37.5 50.0 74.3 R/Y/D/H ― l― l l 1125 (1080)/60i *21 920 x 1 080i 33.8 60.0 74.3 R/Y/D/H ― l― l l 1125 (1080)/50i 1 920 x 1 080i 28.1 50.0 74.3 R/Y/D/H ― l― l l 1125 (1080)/24p 1 920 x 1 080 27.0 24.0 74.3 R/Y/D/H ― l― l l 1125 (1080)/24sF 1 920 x 1 080i 27.0 24.0 74.3 R/Y/D/H ― ― ― ― ― 1125 (1080)/25p 1 920 x 1 080 28.1 25.0 74.3 R/Y/D/H ― l― l ― 1125 (1080)/30p 1 920 x 1 080 33.8 30.0 74.3 R/Y/D/H ― ― ― ― ― 1125 (1080)/60p 1 920 x 1 080 67.5 60.0 148.5 R/Y/D/H ― l― l l 1125 (1080)/50p 1 920 x 1 080 56.3 50.0 148.5 R/Y/D/H ― l― l l VESA400 640 x 400 37.9 85.1 31.5 R/D/H ― ― ― ― ― VGA 640 x 400 31.5 70.1 25.2 R/D/H ― ― ― ― ― 640 x 480 31.5 59.9 25.2 R/D/H l l l l l 640 x 480 35.0 66.7 30.2 R/D/H ― ― ― ― ― 640 x 480 37.9 72.8 31.5 R/D/H l― l l l 640 x 480 37.5 75.0 31.5 R/D/H l― l l l 640 x 480 43.3 85.0 36.0 R/D/H ― ― ― ― ― SVGA 800 x 600 35.2 56.3 36.0 R/D/H l― l l l 800 x 600 37.9 60.3 40.0 R/D/H l― l l l 800 x 600 48.1 72.2 50.0 R/D/H l― l l l 800 x 600 46.9 75.0 49.5 R/D/H l― l l l 800 x 600 53.7 85.1 56.3 R/D/H ― ― ― ― ― MAC16 832 x 624 49.7 74.6 57.3 R/D/H l― l l l XGA 1 024 x 768 39.6 50.0 51.9 R/D/H ― ― ― ― ― 1 024 x 768 48.4 60.0 65.0 R/D/H l― l l l 1 024 x 768 56.5 70.1 75.0 R/D/H l― l l l 1 024 x 768 60.0 75.0 78.8 R/D/H l― l l l 1 024 x 768 65.5 81.6 86.0 R/D/H ― ― ― ― ― 1 024 x 768 68.7 85.0 94.5 R/D/H ― ― ― ― ― 1 024 x 768 80.0 100.0 105.0 R/D/H ― ― ― ― ― 1 024 x 768 99.0 1 19.8 137.8 R/D/H ― ― ― ― ― MXGA 1 152 x 864 64.0 70.0 94.2 R/D/H ― ― ― ― ― 1 152 x 864 67.5 74.9 108.0 R/D/H ― ― ― ― ― 1 152 x 864 77.1 85.0 119.7 R/D/H ― ― ― ― ― MAC21 1 152 x 870 68.7 75.1 100.0 R/D/H l― l l l MSXGA 1 280 x 960 60.0 60.0 108.0 R/D/H ― ― ― ― ―
Chapter 6 Appendix — Technical information 122 - ENGLISH ModeResolution (Dots) Scanning frequency Dot clock freq. (MHz) Format Plug and play *1 Horizontal (kHz) Vertical (Hz) COMPUTER/ DVI-I Analog EDID DVI-I digital HDMI/ DIGITAL LINK EDID1 EDID2 EDID3 SXGA 1 280 x 1 024 64.0 60.0 108.0 R/D/H l― l l l 1 280 x 1 024 80.0 75.0 135.0 R/D/H l― l l l 1 280 x 1 024 91.1 85.0 157.5 R/D/H ― ― ― ― ― SXGA+ 1 400 x 1 050 65.2 60.0 122.6 R/D/H l― l l l 1 400 x 1 050 65.3 60.0 121.8 R/D/H ― ― ― ― ― 1 400 x 1 050 82.2 75.0 155.9 R/D/H ― ― ― ― ― UXGA 1 600 x 1 200 75.0 60.0 162.0 R/D/H l― l l l 1280 x 720 1 280 x 720 37.1 49.8 60.5 R/D/H ― ― ― ― ― 1 280 x 720 44.8 59.9 74.5 R/D/H ― ― ― ― ― 1280 x 768 1 280 x 768 39.6 49.9 65.3 R/D/H ― ― ― ― ― 1 280 x 768 47.8 59.9 79.5 R/D/H ― ― ― ― ― 1280 x 800 1 280 x 800 41.3 50.0 68.0 R/D/H ― ― ― ― ― 1 280 x 800 49.7 59.8 83.5 R/D/H ― ― ― ― ― WXGA+ 1 440 x 900 55.9 59.9 106.5 R/D/H ― ― ― ― ― WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 R/D/H ― ― ― ― ― 1920 x 1080 1 920 x 1 080 *366.6 59.9 138.5 R/D/H ― ― ― ― ― WUXGA 1 920 x 1 200 *374.0 60.0 154.0 R/D/H l― l l l *1 Signals with l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector . A signal, which has no l in the Plug and play columns but has an entry in the Format column, can\ be input. For signals without l in the Plug and play columns, resolution may not be selected in the computer even though the projector\ supports them. *2 When a 1125 (1035)/60i signal was input, it is displayed as a 1 125 (1080)/60i signal. *3 VESA CVT -RB (Reduced Blanking) compatible Note fThe number of display dots for PT-RZ370U is 1 920 x 1 080, and that for PT -RW330U is 1 280 x 800. A signal with a different resolution is converted to the number of display dots and displayed. f The “i” at the end of the resolution indicates an interlaced signal. fWhen interlaced signals are connected, flickering may occur on the projected image. fDIGITAL LINK input compatible signal is the same as HDMI input compatible signa\ l.
Chapter 6 Appendix — Specifications ENGLISH - 123 Specifications The following table describes the specifications of the projector. Model No.PT-RZ370U PT-RW330U Power supply AC 100 V - 240 V 50 Hz/60 Hz Power consumption 460 W (5.2 A - 2.0 A) 0.5 W when [STANDBY MODE] is set to [ECO] 8 W when [STANDBY MODE] is set to [NORMAL] (when fan is stopped) DLP chips Panel size 16.5 mm (0.65") (aspect ratio 16:9) 16.5 mm (0.65") (aspect ratio 16:10) Display method 1-unit DLP chips, DLP type Number of pixels 2 073 600 pixels (1 920 x 1 080 dots) 1 024 000 pixels (1 280 x 800 dots) Lens Zoom 1.5 to 2.9:1 1.5 to 3.1:1 Focus F = 2.0 to 3.4 f = 21.5 mm to 43.0 mm Light source Hybrid light source (LED / laser diode) Light output 3 500 lm *1 (ANSI) Contrast ratio 10 000:1 *1 Supported scanning Frequency *2 For video signalsHorizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz For RGB signals Horizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 Hz PIAS (Panasonic Intelligent Auto Scanning) system Dot clock frequency162 MHz or less For YC BCR/YPBPR signals f 525i (480i) Horizontal: 15.75 kHz, Vertical: 60 Hz f525p (480p) Horizontal: 31.5 kHz, Vertical: 60 Hz f750 (720)/60p Horizontal: 45 kHz, Vertical: 60 Hz f1125 (1035)/60i Horizontal: 33.75 kHz, V ertical: 60 Hz f 1125 (1080)/50i Horizontal: 28.13 kHz, V ertical: 50 Hz f1125 (1080)/24sF Horizontal: 27 kHz, V ertical: 48 Hz f1125 (1080)/30p Horizontal: 33.75 kHz, V ertical: 30 Hz f1125 (1080)/50p Horizontal: 56.25 kHz, V ertical: 50 Hz f625i (576i) Horizontal: 15.63 kHz, Vertical: 50 Hz f625p (576p) Horizontal: 31.25 kHz, Vertical: 50 Hz f750 (720)/50p Horizontal: 37.5 kHz, Vertical: 50 Hz f1125 (1080)/60i Horizontal: 33.75 kHz, V ertical: 60 Hz f 1125 (1080)/24p Horizontal: 27 kHz, V ertical: 24 Hz f1125 (1080)/25p Horizontal: 28.13 kHz, V ertical: 25 Hz f1125 (1080)/60p Horizontal: 67.5 kHz, V ertical: 60 Hz For DVI-D signal 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p f Displayable resolution: VGA to WUXGA (non-interlaced) WUXGA signal supports only VESA CVT-RB (Reduced Blanking) signal. f Dot clock frequency: 25 MHz to 162 MHz For HDMI signal 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1 125 (1080)/50i, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p f Displayable resolution: VGA to WUXGA (non-interlaced) WUXGA signal supports only VESA CVT-RB (Reduced Blanking) signal. f Dot clock frequency: 25 MHz to 162 MHz *1 Measurement, measuring conditions and method of notation all comply with\ ISO211 18 international standards. *2 Refer to “List of compatible signals” ( x page 121) for details on the types of video signals that can be used with th\ e projector .
Chapter 6 Appendix — Specifications 124 - ENGLISH Model No.PT-RZ370U PT-RW330U Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60) Projection screen size 1.02 m (40") - 7.62 m (300") Screen aspect ratio 16:916:10 Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR] Terminal terminal 1 set, high-density D-Sub 15 p (female) RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HDTTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible (SYNC/HD and VD do not support 3 value SYNC.) YP BPR signals Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω terminal 1 set, DVI-I 29 p Digital signals Single link, DVI 1.0 compliant, HDCP compatible RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HDTTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible YP BPR signals Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω terminal 1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz) terminal 1 set, RCA pin jack 1.0 V [p-p] 75 Ω terminal D-Sub 9 p, 1 set, RS-232C compliant, for computer control terminal 1 set, M3 stereo mini jack (monitor output, with stereo support) 0 V [rms] to 1.8 V [rms] (variable), output impedance 2.2 kΩ or lower terminal 1 set, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or higher terminal 1 set, RJ-45 network, for DIGITAL LINK connection, PJLink compatible, 100Base-TX Power cable length 3.0 m (118-1/8") Outer case Molded plastic Dimensions Width: 455 mm (17-29/32") Height: 137 mm (5-13/32") (with minimum feet length) Depth: 415.4 mm (16-11/32") (including lens) Weight Approx. 11 k ] (24.3 lbs.) *1 Operating environment Operating environment temperature*2: 0 °C (32 °F) to 45 °C (113 °F) Operating environment humidity: 20 % to 80 % (no condensation) Remote control Power supply DC 3 V (AA/R6/LR6 battery x 2) Operating range Within 15 m (49'2") (when operated directly in front of signal receiver) W eight 117 ] (4.1 ozs.) (including batteries) Dimensions Width: 48 mm (1-7/8"), Height: 163 mm (6-13/32"), Depth: 24.5 mm (31/32") *1 Average value. Weight varies for each product. *2 When using the projector at high altitudes (1 400 m (4 593') – 2 700 m (8 858') above sea level), the operating environment temperature will be 0 °C (32 °F) – 40 °C (104 °F). Note f The model numbers of accessories and optional components are subject to \ change without notice.
Chapter 6 Appendix — Dimensions ENGLISH - 125 Dimensions Units: mm 415.4 (16-11/32)408.7 (16-3/32) 137 (5-13/32) 128.5 (5-1/16) 125 (4-29/32)63.5(2-1/2)63.5(2-1/2)72(2-27/32)72(2-27/32) 455 (17-29/32) * Actual dimensions may differ depending on the product.
Chapter 6 Appendix — Ceiling mount bracket safeguards 126 - ENGLISH Ceiling mount bracket safeguards fWhen installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (Model No.: ET -PKR100H (for high ceilings), ET-PKR100S (for low ceilings)). f When installing the projector, attach the drop-prevention kit included with the ceiling mount bracket\ . fRequest for a qualified technician to do the installation. fTakes no responsibility for any damage to the projector resulting from us\ e of a ceiling mount bracket not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty \ period of the projector has not expired. fUnused products must be removed promptly by a qualified technician. fUse a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use tools such as electric screwdrivers or impact screwdrivers. fFor details, read the installation manual that comes with the ceiling mo\ unt bracket. fThe model numbers of accessories and optional components are subject to \ change without notice. 0 PP %RWWRPYLHZ 0RGHO1RRIFHLOLQJPRXQWEUDFNHW (73.5+ IRUKLJKFHLOLQJV (73.56 IRUORZFHLOLQJV 7RUTXH “1ÂP
ENGLISH - 127 Index AAccessories ………………………………………17 terminal ………………………………… 20 Adjusting adjustable feet ………………………… 26 [ADVANCED MENU] ……………………… 43, 55 [ASPECT] ………………………………………… 52 [AUDIO SETTING] ……………………………… 77 [AUT O SETUP] …………………………………… 61 button Remote control …………………………… 19, 38 Auto setup function ……………………………… 38 [AUTO SIGNAL] ………………………………… 61 [A V MUTE] ………………………………………… 68 buttonRemote control …………………………… 19, 37 A V mute function ………………………………… 37 B[BACK COLOR] …………………………………66 [BLANKING] ……………………………………… 55 [BRIGHTNESS] ………………………………… 47 CCautions on use …………………………………16 Cautions when transporting …………………… 14 Ceiling mount bracket …………………………… 126 Ceiling mount bracket safeguards ……………… 126 [CLAMP POSITION] …………………………… 56 [CLOCK PHASE] ………………………………… 53 [CLOSED CAPTION SETTING] ………………… 65 [COLOR] ………………………………………… 47 [COLOR MA TCHING] …………………………… 59 [COLOR TEMPERA TURE] ……………………… 47 button Remote control ………………………………… 19 [COMPUTER IN] ………………………………… 61 Connecting the power cord ……………………… 32Connecting to a twisted-pair-cable transmitter …92 Connection ……………………………………… 27 [CONTRAST] …………………………………… 46 [CONTROL DEVICE SETUP] ………………… 87 [COOLING CONDITION] ……………………… 70 CRESTRON RoomV iew …………………… 91, 105 D[DATE AND TIME] ……………………………… 79 [DA YLIGHT VIEW] ……………………………… 49 button Remote control …………………………… 19, 42 Deleting the registered data …………………… 84 [DIGITAL CINEMA REALITY] …………………… 55 DIGITAL LINK ……………………………… 16, 107 button Remote control ………………………………… 19 [DIGITAL LINK INPUT] ………………………… 75 [DIGIT AL LINK MODE] ………………………… 88 [DIGIT AL LINK SETUP] ………………………… 88 [DIGIT AL LINK STATUS] ………………………… 89 Dimensions ……………………………………… 125 Display language …………………………… 44, 58 [DISPLA Y OPTION] ………………………… 44, 59 Disposal …………………………………………… 16 button Remote control …………………………… 19, 38 [DVI-I IN] ………………………………………… 62 E button Remote control …………………………… 19, 39 [ECO MANAGEMENT] ………………………… 70 button Projector body ………………………………… 21 Remote control ………………………………… 19 F[FRAME RESPONSE] ……………………………57 [FREEZE] ………………………………………… 67 button Remote control …………………………… 19, 37 Freeze function …………………………………… 37 to buttons Remote control …………………………… 19, 39 Function button ……………………………… 39, 77 H button Remote control …………………………… 19, 38 [HDMI IN] ………………………………………… 63 I button Remote control …………………………… 19, 22 button Remote control …………………………… 19, 22 [INITIALIZE] ……………………………………… 81 Initial setting ……………………………………… 18 [INITIAL ST ARTUP] ……………………………… 74 [INPUT RESOLUTION] ………………………… 56 button Projector body …………………………… 21, 38 Installation precautions ………………………… 14 K[KEYSTONE] ……………………………………… 54 LLight source indicator ……………………………109 List of compatible signals ……………………… 121 [LOAD ALL USER DATA] ……………………… 80 MMain menu ………………………………………… 42 Main power switch ………………………… 20, 33 Maintenance ……………………………………… 111 button Projector body ………………………………… 21 Remote control ………………………………… 19 Menu item ………………………………………… 43 [MENU LOCK] …………………………………… 86 [MENU LOCK P ASSWORD] …………………… 86 NNavigating through the menu ……………………41 [NETWORK] ………………………………… 45, 88 Network connections …………………………… 91 [NETWORK CONTROL] ………………………… 90 [NETWORK SETUP] …………………………… 90 [NETWORK ST ATUS] …………………………… 91 [NOISE REDUCTION] …………………………… 49 O[ON-SCREEN DISPLAY] …………………………63 On-screen menu ………………………………… 41 Optional accessories …………………………… 17 P[PICTURE] …………………………………… 43, 46 [PICTURE MODE] ……………………………… 46 [POSITION] ………………………………… 43, 51 Power button Projector body ………………………………… 21 Remote control ………………………………… 19 Power cord ……………………………………… 32 Power indicator …………………………………… 32 Precautions for use ……………………………… 14 Projecting ………………………………………… 35 [PROJECTION METHOD] ………………… 24, 69 [PROJECT OR ID] ………………………………… 69 [PROJECT OR SETUP] …………………… 44, 69 R[RASTER POSITION] …………………………… 57 Read this first! ……………………………………… 2 Registering a signal to the list ………………… 83 Remote control …………………………………… 19 Remote control operations ……………………… 37 Renaming the registered signal ………………… 83 Resetting to the factory default ………………… 42 button Projector body ………………………………… 21 Remote control ………………………………… 19 RoomView ………………………………………… 105 [RS-232C] …………………………………… 75, 1 18 S[SAVE ALL USER DATA] …………………………80 [SCHEDULE]……………………………………… 72 [SCREEN SETTING] …………………………… 60 Security …………………………………………… 15 [SECURITY] ………………………………… 45, 85 [SECURITY PASSWORD] ……………………… 85 [SECURITY P ASSWORD CHANGE] …………85 Selecting the input signal ……………………… 35 terminal …………………………… 11 8 [SERVICE PASSWORD] ………………………… 81 Setting remote control ID numbers …………… 22 Setting up ………………………………………… 24 [SHARPNESS] …………………………………… 49 [SHIFT] …………………………………………… 51 [SIGNAL LIST] ……………………………… 45, 83 Specifications …………………………………… 123sRGB-compliant video …………………………… 50 [ST ARTUP INPUT SELECT] …………………… 74 [ST ARTUP LOGO] ……………………………… 66 [ST ATUS] ………………………………………… 79 [SUB MEMOR Y LIST] …………………………… 67 Switching of f the projector ……………………… 34 Switching on the projector ……………………… 33 Switching the input signal ……………………… 38 [SYSTEM SELECTOR] ………………………… 50 TTemperature indicator …………………………… 11 0 [TEST PATTERN] …………………………… 45, 82 [TEXT CHANGE] ………………………………… 86 [TEXT DISPLAY] ………………………………… 86 [TINT] ………………………………………………\ 47 T roubleshooting ………………………………… 11 2 V buttonRemote control …………………………… 19, 38 V olume adjustment ……………………………… 39 / button Remote control …………………………… 19, 39 Z[ZOOM] …………………………………………… 52 Index
Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authoriti\ es or dealer and ask for the correct method of disposal. Panasonic System Communications Company of North America One Panasonic Way 2F-13, Secaucus, NJ 07094 TEL: (877) 803 - 8492 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 TEL: (905) 624 - 5010 0ñ1111111 10Á0ä11111111 11 Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2012W1112YY0 -YI