Panasonic Projector PT-RZ475 Specifications

							1-Chip DLP™ Projectors
PT-RZ475 Series
Ideal  for  Rear  Projection—
Extremely  Long-Term Continuous Operation 
						

							SOLID  SHINE  series  uses  the  newly  developed  LED/Laser-combined  light  source
SOLID  SHINE  series  projectors  provide  solid  reliability  and 
long-lasting  brightness  unprecedented  by  conventional 
lamp-based  projectors.
Approximately  up  to  10  years*
1  of  maintenance-free 
operation
No  need  to  replace  the  light  source  or  air  filter,  providing 
a  dramatic  reduction  in  the  Total  Cost  of  Ownership  (TCO).
Long-lasting  picture  quality
Excellent  picture  quality  and  brightness  are  maintained  for 
a  long  time.
Superb  color  reproduction
Beautiful,  vivid  colors  exceeding  the  levels  of  conventional 
projectors.
Quick  start,  quick  off
The  image  appears  almost  instantly  upon  powering  up, 
and  there  is  no  need  for  cooling  after  turning  the  power 
off.  The  power  can  be  turned  on  immediately  after  being 
turned  off,  and  it  can  be  turned  on/off  as  many  times  as 
you  want.
A Short-Throw SOLID SHINE Projector Featuring 
Long-Term Reliability and Excellent TCO
The  PT-RZ475,  a  new  Panasonic  SOLID  SHINE  projector  member,  has  no  lamps  or  air 
filters,  allowing  it  to  achieve  an  extraordinarily  long  period  of  maintenance-free  opera-
tion.  This  high-performance  LED/Laser  projector  boasts  up  to  87,600  hours*
1 of con -
tinuous  operation,  i.e.,  about  10  years  of  24/7  projection,    while  maintaining  excellent 
brightness  and  picture  quality.  The  total  cost  of  o wnership  (TCO)  has  also  been 
reduced  because  you  no  longer  have  to  keep  replacement  lamps  and  filters  on  hand. 
Equipped with a high-precision short-throw lens, the PT-RZ475 is ideal for rear projec-
tion,  for  use  in  monitoring/control  rooms,  or  for  digital  signage.
Full HD
PT-RZ475
3,000 lm
PT-RZ475  Optical  Structure  Image
Phosphor  wheel 
(changes  from 
blue  to  green)
LED 
(blue)
LED  (red) Light  sensor  for 
SOLID  SHINE  drive
Laser  (blue)DLP™  chip
Projection  lens
Condenser 
lens
*1 
With LIGHT  POWER set to Eco2. Replacement of other parts than the light source may be required in shorter period.   
24  hours/day  !  365  days/year  !  10  years  =  87,600  hours      
						

							Outstanding  Approx.  up  to  10  Years*1  of 
Continuous  Operation 
This  new  LED/Laser-combined  light  source 
requires  no  maintenance  for  approximately  up  to 
10  years. *
1  In  many  cases,  this  means  no 
maintenance  until  your  next  refresh  cycle. 
Naturally,  there  are  no  lamp  burnout  problems 
during  use,  so  reliability  is  further  increased. 
There  is  also  no  filter  to  clean  due  to  carefully 
engineered  sealed  optics.  As  a  consequence, 
running  cost  is  dramatically  lowered  because  of 
the  savings  on  lamp  costs,  maintenance  labor 
and  hassle  of  stocking  lamps.
Beautiful  Picture  Quality  for  a  Long  Period 
of  Time  with  24/7  Operation 
The  rate  of  brightness  deterioration  in  the  LED/
Laser-combined  light  source  is  extremely  slow 
compared  to  lamp-based  projectors.  The  SOLID 
SHINE  drive  uses  a  built-in  sensor  to  constantly 
detect  the  intensity  of  the  light  source  and  cor -
rect  corresponding  changes  in  white  balance. 
This  all  helps  to  maintain  excellent  picture  quali-
ty  for  a  long  period  of  time.  Contrast  is  out-
standing  too,  at  20,000:1,  and  images  are 
reproduced  with  a  wide  dynamic  range.  There  is 
no  maintenance  required  because  the  PT-RZ475 
does  not  use  a  lamp  or  air  filter.  And  it  has  an 
efficient  cooling  system  and  dust-resistant  struc-
ture,  and  uses  a  DLP
™ chip that has a long life. 
Together,  this  makes  the  PT-RZ475  ideal  for 
24/7  operation. Heat  Pipe  Cooling  System  Maintains  Stable 
Operation  up  to  45  °C  (113  °F)
*
2 
Laser  cooling  is  performed  by  releasing  the  heat 
to  cooling  fins,  then  cooling  with  a  heat  pipe 
cooling  system.  This  suppresses  temperature 
rises  inside  the  projector  and  allows  stable 
operation  up  to  an  ambient  temperature  of   
45  °C  (113  °F ) *
2.  The  use  of  this  heat  pipe -
cooled  system  also  achieves  quiet  operation  of 
35  dB *
3,  enabling  viewers  to  concentrate  on  the 
presentation  or  on  quiet  movie  scenes.
Dust-Resistant  Structure  with  an  Airtight 
Optical  Block
The  area  between  the  LED/Laser  to  the  DLP
™ 
chip  and  prism  is  hermetically  sealed  to  form  an 
airtight  structure  for  the  optical  block,  the  heart 
of  the  projector.  This  resists  the  effects  of  dust 
and  other  particles  in  the  air,  and  enables  use 
of  the  projector  in  a  wide  range  of  environments.
Image  Appears  Immediately—No  Need  for 
Cooling  after  Use 
Images  do  not  appear  quickly  with  lamp-based 
projectors  because  the  projector  requires  time  to 
warm  up.  With  the  PT-RZ475,  the  image 
appears  almost  instantly.  There’s  also  no  cooling 
time  required  when  turning  the  power  off,  so 
you  can  quickly  turn  the  projector  on  and  off  as 
many  times  as  needed. Superior  Color  Reproduction 
The  LED/Laser-combined  light  source  has  a 
higher  level  of  color  purity  than  an  ordinary 
lamp,  allowing  it  to  achieve  color  reproduction 
with  wider  color  space.  Colors  are  more  vibrant 
than  those  of  conventional  projectors.
30
!  Drive
*
4  Switching  Prevents  Color 
Breaking 
In  1-chip  DLP
™ system projectors with conven -
tional  lamp,  a  color  wheel  is  used  for  time-divi-
sion  multiplexing  in  a  method  where  the  human 
eye  combines  the  result  to  achieve  a  full-color 
palette.  In  the  PT-RZ475,  this  is  done  by  on/off 
switching  of  the  LED/Laser-combined  light 
source.  A  unique  Panasonic  power  supply  circuit 
provides  time-division  multiplexing  with  ultrafast 
30!  drive *
4.  The  resulting,  high-definition 
images  exhibit  virtually  no  color  breaking *5.
DIGITAL  LINK—The  Single 
Cable  Solution
sTransmits  Digital  Signals  up 
to  100  m  (328  ft)  with  a  Single  Cable
Equipped  with  a  DIGITAL  LINK  terminal,  the 
PT-RZ475  allows  transmission  of  HDMI,  uncom-
pressed  HD  digital  video,  audio  and  control  sig-
nals  (Ethernet,  RS-232C)  for  up  to  100  meters 
(328  feet)  through  a  single  CAT5e  (STP)  cable 
or  higher.  This  simplifies  cabling  and  system 
upgrades,  making  it  ideal  for  ceiling-mounted 
and  other  permanent  installations.
sOptional  ET-YFB100G  Digital  Interface  Box 
for  Easy  Setup
Used  together  with  the  new  ET-YFB100G  Digital 
Interface  Box,  or  other  compatible  equipment *
6, 
the  installation  of  this  projector  is  easier  than 
ever,  without  any  need  for  external  receivers. 
The  input  signal  can  also  be  easily  switched *
7 
LIGHT POWERNormal
3,000 lmLIGHT POWEREco1
1,6 0 0 lmLIGHT POWEREco2
1,0 0 0 lm
10 years
87,600  hours
7 years
61,320  hours
LIGHT  SOURCE  LIFE
BRIGHTNESS
3 years
26,280  hours
PT-RZ475
Lamp-based 
projector
0.1
0
0.1
[u]
[v]
0.2 0.3 0.4
0.2 0.3 0.4 0.5 0.6
Heat-pipe  cooling  system
Phosphor  wheel
Laser
LED (Red) LED (Blue)
Maintenance-Free  24/7  Operation Color Space Comparison
Brightness
BrightnessVisible 
brightness 100%
100% Start-up time
Time
Time
Power is
turned on Power is
turned on
Light source goes on Lamp goes on
Start-up time
Lamp-based ProjectorTime  is  required  to  reach  maximum  brightness.
Ma ximum  brightness  is  reached  as  soon  as  the 
light  source  goes  on.
PT-RZ475
Long-Lasting  ReliabilityHigh  Picture  Quality
Connection  Flexibility
*
2  The  operating  temperature  range  is  0  °C  to  40  °C  (32  °F  to  104  °F)  when  used  in 
locations  from  1,400  m  to  2,700  m  (4,593  ft  to  8,858  ft)  above  sea  level.  If  the 
ambient  temperature  exceeds  35  °C  (95  °F),  the  light  output  may  be  reduced  to 
protect  the  projector.    *
3 
With LIGHT  SOURCE  MODE set to NORMAL. 
* 4  Picture  mode:  Dynamic.  10
!  drive  in  other  picture  modes.  The  rate  for  each  vertical 
sync/blanking  interval,  with  R/G/B  light  source  switching  set  to  1!. 
* 5 
A  condition  in  which  incorrect  color  expression  causes  color  flickering.  
						

							from  control  panel  or  remote  control  of  the  pro-
jector  to  enable  attractive  presentations  or  les-
sons  using  multimedia  content.
Abundant  Connection  Terminals 
Interfaces  include  HDMI  and  DVI-I  inputs.  The 
serial  terminal  (RS-232C)  has  an  Emulate  func-
tion  that  lets  you  continue  using  existing  control 
systems  when  replacing  previous  Panasonic 
models.  It  is  also  possible  to  output  audio  dur-
ing  Standby  mode*8.  This  is  convenient  when 
connecting  an  external  audio  system  through  the 
projector*9.  A  closed  caption  decoder  is  built  in.
Easy  Remote  Monitoring  and  Control  
over  a  LAN 
Web  browser  on  a  computer  connected  through 
a  wired  LAN  system  lets  you  remotely  operate 
projectors  and  check  their  status.  An  e-mail 
messaging  function  can  also  notify  you  the 
overall  projector  status.  In  addition,  Multi 
Projector  Monitoring  and  Control  Software  Ver. 
2.8  is  available  for  monitoring  and  controlling 
multiple  Panasonic  projectors  from  a  single  PC. 
The  wired  LAN  terminal  is  compatible  with 
PJLink™ (class 1).
Powered  Focus,  Short-Throw  Lens
The  lens  axis  can  be 
shifted  ±10%  vertically 
and  ±3.4%  horizontally. 
This  enables  to  replace 
an  existing  projector  and 
to  make  fine  tweaks  after 
installation.  Because  it 
is  a  powered  focus,  the 
focus  can  be  adjusted 
by  remote  control  when 
it  is  installed  in  a  rear 
projection  configuration.
Multi-Screen  Support  System  Seamlessly 
Connects  Multiple  Screens
sEdge  Blending 
The  edges  of  adjacent  screens  can  be  blended 
and  their  luminance  controlled.
sColor  Matching*10 
This  function  corrects  for  slight  variations  in  the 
color  reproduction  range  of  individual  projectors.
Multi-Unit  Brightness  Control 
This  function  automatically  corrects  the  bright-
ness  fluctuations  that  occur  over  time  in  the 
individual  projectors  of  a  multi-screen  system. 
Up  to  eight  projectors  can  be  controlled  by 
connecting  to  each  other  via  a  hub,  and  this 
can  be  increased  to  a  maximum  of  2,048 
projectors  by  using  “Multi  Projector  Monitoring  & 
Control  Software*11.” 
Portrait  Mode  Capability 
Portrait  mode  allows  the 
projector  to  be  mounted 
with  its  side  surface 
facing  down*12,  for 
projecting  onto  a  long, 
vertical  screen.  The 
optional  ET-PKR100P 
ceiling  mount  bracket 
for  portrait  projection  is 
also  available.
3D  Projection  Capability 
The  PT-RZ475  can  deliver 
impressive  3D  images  when 
viewed  with  active  3D  glasses*13. 
sThe  HDMI  input  terminal  supports  3D  to  proj-
ect  Blu-ray  3D  images.
sDLP™ Link™:  You  can  build  a  3D  system  with-
out  the  need  for  the  optional  transmitter. 
sAn  additional  3D  IR  transmitter  can  be  con-
NECTEDTOTHEPROJECTORS$39.#/54
terminal.
Other  Features
sDaylight  View  Basic  ensures  clear  images 
even  in  brightly  lit  rooms.
sDICOM  simulation  mode*14  for  clear  X-ray 
images.
sRec.  709  mode  for  HDTV  projection. 
sCompatible  with  Crestron  Connected.™
s15  m  (49  ft)  long-range  wireless  remote 
control.
sScheduling  function.
sFlexible  360-degree  installation 
sA  unique  ID  number  can  be  assigned  to  each 
projector  using  the  supplied  wireless  remote 
control  unit. 
sA  lens-centered,  symmetrical  design  provides 
ease  of  installation.
sCustomized  startup  logo:    You  can  change  the 
default  Panasonic  start  up  logo  to  any  logo 
you  want*15. 
sSecurity  features  include  a  security  bar,  key 
lock,  and  security  password. 
For  details  on  other  manufacturers’  equipment, visit  our  Projector  Global  Web  Site: panasonic.net/avc/projector
Blu-ray discplayerDocumentcameraDesktop PCVCR
Digital Interface BoxET-YFB100G
Tr a n s m i t t e r / s w i t c h e r
s#2%342/.CONNECTEDs%XTRONs!-804
2:3ERIES
CAT5e (STP) cable or higher: Video, audio and control signals (up to 100 m/328 ft)
3.4%3.4%
10%
10%
Rear  projection  multi-screen
Rear  projection  multi-screen
Without  Multi-Unit Brightness  ControlWith  Multi-Unit Brightness  Control
Time
Brightness
(A)(B)
Image  from the  projector  1Image  from  theprojector  2
Brightness fluctuations occur.
Time
Brightness
(A´)(B´)
Images  from  the projector  1  and  2
Presetbrightness
Projector  1Projector  1
Projector  3Projector  3
Projector  2Projector  2
Projector  4Projector  4
PT-RZ475PT-RZ475
Without  edge blendingWith  edge blending
Overlapping image  edges
Color matching
Enhanced  Installation
Ecology-Conscious Design
sLamp-free (no mercury)sLow heat dissipationsRoHS Directive compliantsNo halogenated flame retardants are used in the cabinet.sLead-free glass is used for the lens.sLight source mode is selectable to reduce power con-sumption.s“ECO” button on the remote control for easy setting up of Eco Management functions.sStandby power consumption of only 0.5 W has been achieved. (STANDBY MODE: ECO)sAn Auto Off Timer switches the projector to standby mode when no input signal is received for a preset time.
* #RESTRONS$IGITAL-EDIA©%XTRONS8403YSTEMSAND!-8S%NOVA$68*7 Input  selection  and  other  ET-YFB100G  operations  can be  performed  only  when  connecting  to  a  DIGITAL LINK  compatible  projector.*8 Requires  menu  selection.*9 Audio  monitoring  requires  external  speakers  and  an audio  amplifier.*10 Consult  you  dealer  for  information  about  color matching  software. * )FTHETEMPERATUREOFTHEPROJECTORSSURROUNDINGSISelevated,  light  output  may  be  reduced  in  order  to protect  the  projector  unit.  If  this  software  is  used  for the  brightness  control  of  multiple  projectors,  please ensure  that  as  far  as  possible  the  temperature  of  the surroundings  is  the  same  for  all  projectors.*12 The  projector  itself  cannot  be  set  vertically  by  itself. Also,  the  side  with  terminals  should  be  facing downward.  Using  the  projector  at  an  angle  that exceeds  the  available  angle  of  210°  may  result  in malfunctions.  If  setting  up  the  projector  at  an  angle that  exceeds  210°  is  required,  consult  your  dealer.*13 To  view  3D  images,  active-shutter  3D  glasses  are separately  required.  (In  the  active  shutter  system,  the right/left  liquid  cr ystal  shutter  is  opened  and  closed alternately  according  to  projected  images. *14 This  product  is  not  a  medical  instrument.  Do  not  use it  for  actual  medical  diagnosis. *15 A  new    logo  can  be  uploaded  by  connecting  a computer  to  the  PT-RZ475  through  the  LAN  or  serial connection  by  using  the  Logo  Transfer  Software.  Still images  that  can  be  uploaded  are  limited  to  1024  x 768  pixel  bitmap  files.  Also,  the  application  will reduce  the  number  of  colors  to  191. 
						

							ET-PKR100P
Ceiling mount bracket  
for portrait
NOTE: Photos show the brackets attached to the PT-RZ470K.
ET-PKR100H
Ceiling mount bracket  
for high ceilings
Options
ET-PKR100S
Ceiling mount bracket  
for low ceilings
ET-YFB100G
Digital interface box
ET-MWP100G
Multi Window Processor
Brackets included for various installation needs, 
including server rack (EIA standards) mounting.
ET-MWP100G Multi Window Processor
Tu r n k e y   S o l u t i o n   f o r   M u l t i   W i n d o w   P r e s e n t a t i o n s
System Connection Example
The  ET-MWP100G  Panasonic  Multi  Window  Processor  makes  it  possible  to 
quickly  and  efficiently  combine  multiple  PT-RZ475  projectors  into  a  multi  vision 
system.  Equipped  with  16  slots  for  input/output  terminals,  the  ET-MWP100G 
enables  a  combination  of  5  optional  interface  boards,  including  a  DIGITAL  LINK 
output  board,  to  support  a  variety  of  input  sources  and  output  devices.  Interface 
boards  are  also  easy  to  add  or  change,  making  the  system  highly  flexible  even 
after  it  has  been  configured.  Images  can  be  split  among  multiple  display  units, 
and  multi-windows  (PinP)  can  be  freely  allotted  in  desired  sizes,  locations,  incli-
nations  and  overlapping  orders.  Display  patterns  can  be  registered  and  switched 
by  control  software  for  Multi  Window  Processor,  which  is  included  with  the 
ET-MWP100G,  installed  onto  a  PC.  Even  with  interface  boards  mounted  onto  all 
16  slots,  the  ET-MWP100G  features  low  power  consumption  of  160  W  or  less, 
helping  to  lower  the  total  cost  of  ownership  (TCO)  in  24/7  continuous  operation.
DIGITAL LINKVideo signalLAN
Output pattern examples
Multi Window ProcessorET-MWP100G*17
PCPCPCPC
CameraCameraCameraCamera
teleconferencesystemDocumentcameraBlu-ray discplayer
PT-RZ475PT-RZ475
PT-RZ475Rear projection multi-screenPT-RZ475
Control PC*18
Major  ET-MWP100G  Features 
sDedicated  “Control  Software  for  Multi  Window  Processor”  supplieds360°  output  rotationsSimultaneous  use  of  multiple  layouts  and  canvasessOne  or  more  windows  (PinPs)  on  each  canvas  with  360°  rotation  of  each  windows16  interface  board  slotssEasy  addition  and  replacement  of  optional  interface  boardssLow  power  consumption  of  max  160  W*16 with 16 interface boards mountedsDIGITAL  LINK  compatibility  (when  the  ET-MCQDL350  interface  board  mounted)   sCapability  of  up  to  28  inputs  with  the  ET-MCYDV100  DVI-U  and  ET-MCYSD200  3G/HD/SD-SDI  interface  boardssUp  to  56  inputs  with  the  ET-MCYSD210  HD/SD-SDI  interface  boardsCapability  of  up  to  28  outputs  with  the  ET-MCQDV150  DVI-U  and  ET-MCQDL350 DIGITAL  LINK  interface  board
*16 When  using  a  single  power  supply  unit. The  power  consumption  becomes  180 W  when  the  optional  ET-RPS100  power  supply  unit  is  added. *17 Input/output  interface  boards  must  be  mounted. *18 The  control  software  for  Multi Window  Processor,  which  is  included  with  the  ET-MWP100G,  must  be  installed.  
						

							PT-RZ475G1 Printed in Japan.
All information included here is valid as of June 2013.
For more information about Panasonic projectors, please visit :Projector Global Web Site – panasonic.net/avc/projectorFacebook – w w w.facebook.com /panasonicprojectorYo uTu b e   –  w w w.youtube.com /user/ PanasonicProjector
Weights  and  dimensions  shown  are  approximate.  Specifications  and  appearance  are  subject  to change  without  notice.  Product  availability  differs  depending  on  region  and  country.  This  product may be subject to export control regulations. DLP, DLP logo and DLP Medallion logo are trademarks or  registered  trademarks  of Texas  Instruments. The  projection  distances  and  throw  ratios  given  in this leaflet are for use only as guidelines. For more detailed information, please consult the dealer from  whom  you  are  purchasing  the  product. The  PJLink  trademark  is  an  application  trademark  in Japan,  the  United  States,  and  other  countries  and  regions  or  registered  trademarks.  HDMI,  the HDMI  Logo,  and  High-Definition  Multimedia  Interface  are  trademarks  or  registered  trademarks  of HDMI  Licensing  LLC  in  the  United  States  and  other  countries. All  other  trademarks  are  the  prop-erty of their respective trademark owners. Projection images simulated. © 2013 Panasonic Corporation. All rights reserved.
Specifications
fH: 15.75 kHz, fV: 60 Hz [480i ( 525i ) ]fH: 15.63 kHz, fV: 50 Hz [ 576i ( 625i ) ]fH: 31.50 kHz, fV: 60 Hz [480p ( 525p ) ]fH: 31.25 kHz, fV: 50 Hz [ 576p (625p)]fH: 45.00 kHz, fV: 60 Hz [ 720 ( 750 ) / 60p ]fH: 37.50 kHz, fV: 50 Hz [ 720 ( 750 ) / 50p ]fH: 33.75 kHz, fV: 60 Hz [1035 / 60i]fH: 33.75 kHz, fV: 60 Hz [1080 (1125 ) / 60i]fH: 28.13 kHz, fV: 50 Hz [1080 (1125 ) / 50i]fH: 28.13 kHz, fV: 25 Hz [1080 (1125 ) /25p ]fH: 27.00 kHz, fV: 24 Hz [1080 (1125 ) /24p ]fH: 27.00 kHz, fV: 48 Hz [1080 (1125 ) /24sF ]fH: 33.75 kHz, fV: 30 Hz [1080 (1125 ) / 30p ]fH: 67.50 kHz, fV: 60 Hz [1080 (1125 ) / 60p ]fH: 56.25 kHz, fV: 50 Hz [1080 (1125 ) / 50p ]
10 0 –24 0 V AC, 5.0–1. 8 A , 5 0 / 6 0 H z430 W (440 VA) (230 W*1 with LIGHT POWER set to NORMAL/Eco1, 170 W*1 with LIGHT POWER set to Eco2, 0.5 W with STANDBY MODE set to ECO*2, 8 W with STANDBY MODE set to NORMAL)16.5 mm ( 0.6 5 in ) diagonal (16 : 9 aspect ratio )DLP™ chip ! 1, DLP™ projection system2,073,600 (1,920 ! 1,080 ) ! 1, total of 2,073,600 pixelsFixed, powered focus, F 1.8, f 11.9 mm0.8:1LED/Laser-combined (R, B: LED; G: Laser diode)1.0 2 – 5 .0 8 m ( 4 0 – 2 0 0 in che s ) diag o nall y, 16 : 9 a s p e c t r at i o3,000 lm90 %20,000:1 (full on/off)1, 9 2 0 ! 1,0 8 0 p i xels ( I np u t signals t hat exc e e d t his re s o lu t i o n will be converted to 1,920 ! 1,080 pixels.) fH: 27–100 kHz, fv: 24 –120 Hz, dot clock: 25 –162 MHzfH: 15 –100 kHz, fv: 24 –120 Hz, dot clock: 162 MHz or lower
fH: 15.75 kHz, fV: 60 Hz [ NTSC / NTSC4.43 / PAL-M / PAL60 ] , fH: 15.63 kHz, fV: 50 Hz [ PAL / PAL-N / SECAM ]Vertical: ±10 % (manual), horizontal: ±3.4% ( manual)Vertical: ±40°Ceiling/floor, front/rearHDMI 19-pin ! 1 ( Deep Color, compatible with HDCP) 480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 10 8 0 (1125 ) / 6 0i, 10 8 0 (1125 ) / 5 0i, 10 8 0 (1125 ) / 25p, 10 8 0 (1125 ) / 24p, 10 8 0 (1125 ) / 24 sF, 10 8 0 (1125 ) / 3 0 p, 10 8 0 (1125 ) / 6 0 p, 10 8 0 (1125 ) / 5 0 p, VGA ( 640 ! 480 ) –WUXGA*4 (1,920 ! 1,200 ), compatible with non-interlaced signals only, dot clock: 25–162 MHz, audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)DVI-I 29-pin ! 1 ( DVI 1.0 compliant, compatible with HDCP, compatible with single link only) 480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 10 8 0 (1125 ) / 6 0i, 10 8 0 (1125 ) / 5 0i, 10 8 0 (1125 ) / 25p, 10 8 0 (1125 ) / 24p, 10 8 0 (1125 ) / 24 sF, 10 8 0 (1125 ) / 3 0 p, 10 8 0 (1125 ) / 6 0 p, 10 8 0 (1125 ) / 5 0 p, VGA ( 640 ! 480 ) –WUXGA*4 (1,920 ! 1,200 ), compatible with non-interlaced signals only, dot clock: 25–162 MHzR/B: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, HD/ VD, SYNC: T TL, high impedance, positive/negative automaticY: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohmsD-Sub HD 15-pin (female) ! 1 ( RGB /YPBPR/YCBCR ! 1)Pin jack ! 1M3 (L, R) ! 1M3 (L, R) ! 1D-sub 9-pin (female) ! 1 for external control ( RS-232C compliant)RJ-45 ! 1 (for network and DIGITAL LINK (video /audio /network /serial control) connection, 100Base-TX, compatible with PJLink™, HDCP compatible, Deep Color compatible) 480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 10 8 0 (1125 ) / 6 0i, 10 8 0 (1125 ) / 5 0i, 10 8 0 (1125 ) / 25p, 10 8 0 (1125 ) / 24p, 10 8 0 (1125 ) /24sF, 1080 (1125 ) / 30p, 10 8 0 (1125 ) / 6 0 p, 10 8 0 (1125 ) / 5 0 p, VGA ( 640 ! 480 ) –WUXGA*4 (1,920 ! 1,200 ), compatible with non-interlaced signals only, dot clock: 25–162 MHzMini DIN 3-pin ! 1, for 3D transmitter connectionMolded plastic455 ! 137*5 ! 409 mm (17-29 / 32 ! 5-13 / 32*5 ! 16-3 / 32 in ) (lens incuded)Approximately 11.5 kg (25.4 lbs)35 dB (LIGHT POWER MODE: NORMAL)Operating temperature: 0–45 °C*7 ( 32–113 °F*7), operating humidity: 20 –80 % (no condensation)Power cord (with secure lock) ! 1, wireless remote control unit, batteries for remote control ( R6/LR6/A A type ! 2), software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software)
ModelPower supplyPower consumption
DLP™ chip
LensThrow ratioLight sourceScreen size (diagonal)Brightness*3
Center-to-corner uniformity*3
Contrast*3
Resolution
Scanning frequency
Optical axis shiftKeystone correction rangeInstallationTer minals
Cabinet materialsDimensions (W ! H ! D )
Weight*6
Operation noise*3
Operating environment
Supplied accessories
Panel sizeDisplay methodPixels
HDMI/DVI-I (digital)DVI-I (analog)/RGBYPBPR ( YCBCR)
Video
HDMI IN
DVI-I IN
 Digital
 RGB
 YPBPR/YCBCRCOMPUTER (RGB) INVIDEO INAUDIO INAUDIO OUTSERIAL INLAN / DIGITAL LINK
3D SYNC OUT
PT-RZ475
*1 In STANDARD/GRAPHIC  p i c t u r e   m o d e .  M e a s u r e d   b a s e d   o n   t h e   p o w e r   c o n s u m p t i o n   r a t e and  a  measurement  method  for  the TV  receiver. *2 When  the STANDBY MODE is set to ECO,  n e t w o r k   f u n c t i o n s   s u c h   a s   p o w e r   o n   o v e r   t h e   L A N n e t w o r k   w i l l   n o t   o p e r a t e .  A l s o ,  o n l y   c e r t a i n   c o m m a n d s   c a n   b e   r e c e i v e d   f o r   e x t e r n a l control  using  the  serial  terminal. *3 M e a s u r e m e n t ,  m e a s u r i n g   c o n d i t i o n s ,  a n d   m e t h o d   o f   n o t a t i o n   a l l   c o m p l y   w i t h   I S O 21118  international  standards.*4 W U X G A   r e s o l u t i o n   i s   s u p p o r t e d   o n l y   w h e n   t h e   s i g n a l s   a r e   c o m p l i a n t   w i t h   V E S A   C V T- R B (Coordinated Video Timing-Reduced  Blanking).*5 With  legs  at  shortest  position.*6 Average  value.  May  differ  depending  on  the  actual  unit.*7 0 – 4 0   ° C   ( 3 2 – 1 0 4   ° F )   b e t w e e n   1 , 4 0 0   m   a n d   2 , 7 0 0   m   ( 4 , 5 9 3   f t   a n d   8 , 8 5 8   f t )   a b o v e s e a   l e v e l .  I f   t h e   a m b i e n t   t e m p e r a t u r e   e x c e e d s   3 5   ° C   ( 9 5   ° F ) ,  t h e   l i g h t   o u t p u t   m a y   b e reduced  to  protect  the  projector.
455 (17-29/32)409 (16-3/32)
13 7(5-13/32)
Dimensionsunit: mm (inches)
1. D o  n o t  i n s t a l l  t h e  p r o j e c t o r  i n  l o c a t i o n s  t h a t  a r e  s u b j e c t  t o  e x c e s s i v e  w a t e r,  h u m i d i t y,  s t e a m ,  o r oily  smoke.  Doing  so  may  result  in  fire,  malfunction,  or  electric  shock.2. Please  observe  the  following  precautions:s .EVERPLACEOBJECTSONTOPOFTHEPROJECTORWHILEITISOPERATIONs -AKESURETHEREISANUNOBSTRUCTEDSPACEOFMMFTIN	ORMOREAROUNDTHEPROJECTORSexhaust  openings.s $ONOTSTACKPROJECTORUNITSDIRECTLYONTOPOFONEANOTHERFORTHEPURPOSEOFMULTIPLESTACKED	p r o j e c t i o n .  W h e n  s t a c k i n g  p r o j e c t o r  u n i t s ,  b e  s u r e  t o  p r o v i d e  t h e  a m o u n t  o f  s p a c e  i n d i c a t e d below  between  them.  These  space  requirements  also  apply  to  installations  where  only  one  pro-jector  unit  is  operating  at  one  time  and  the  other  unit  is  used  as  a  backup.s -AKESURETHATNOTHINGBLOCKSTHEPROJECTORSAIRINTAKEANDEXHAUSTOPENINGS!LSOINSTALLTHEp r o j e c t o r  s o  t h a t  c o o l  o r  h o t  a i r  f r o m  o t h e r  a i r  c o n d i t i o n i n g  e q u i p m e n t  d o e s  n o t  f l o w  d i r e c t l y TOWARDTHEPROJECTORSAIRINTAKEOREXHAUSTOPENINGSs $ONOTINSTALLTHEPROJECTORINANENCLOSEDSPACE)FITISNECESSARYTOINSTALLITINANENCLOSEDs p a c e ,  a d d  a  s e p a r a t e  v e n t i l a t i o n  s y s t e m .  I f  v e n t i l a t i o n  i s  i n s u f f i c i e n t ,  h o t  a i r  w i l l  a c c u m u l a t e  a t THEINTAKEOPENING4HISMAYCAUSETHEPROJECTORSPROTECTIVECIRCUITTOINTERRUPTPROJECTOROPERA-tion.s )FTHEPROJECTORISPLACEDINABOXENSURETHATTHEPROJECTORSINTAKEANDEXHAUSTOPENINGSAREn o t  b l o c k e d .  Ta k e  p a r t i c u l a r  c a r e  t o  e n s u r e  t h a t  h o t  a i r  f r o m  t h e  e x h a u s t  o p e n i n g s  i s  n o t  s u c k e d into  the  intake  openings.s 4OINSTALLANDUSETHEPROJECTORVIAAMETHODTHATDOESNOTUSETHEADJUSTABLEFEETINAFLOORs t a n d i n g  i n s t a l l a t i o n ,  f i x  t h e  p r o j e c t o r  u s i n g  t h e  f o u r  s c r e w  h o l e s  f o r  c e i l i n g  m o u n t i n g .  ( S c r e w diameter:  M4,  tapping  depth  inside  the  set:  10  mm,  torque:  1.25  ±  0.2  N ·m)
NOTES ON USE
PT-RZ475 (16:9 aspect ratio)unit: meters (feet)
1.02
1.52
2.03
2.54
3.05
3.81
5.08
0.67
1.03
1.39
1.75
2.11
2.65
3.55
0.20 
0.30 
0.40 
0.50 
0.60 
0.75 
1.00 
0.30 
0.45 
0.60 
0.75 
0.90 
1.12 
1.49 
!
!
!
!
!
!
!
40
60
80
100
120
150
200
/
/
/
/
/
/
/
(2.2)
(3.4)
(4.6)
(5.7)
(6.9)
(8.7)
(11.7)
(0.7
(1.0
(1.3
(1.6
(2.0
(2.5
(3.3
1.0)
1.5)
2.0)
2.5)
2.9)
3.7)
4.9)
!
!
!
!
!
!
!
Projection size [diagonal][m][in]Projection distanceHeight from the edge of screento center of lens
Projection Distance