Panasonic Projector PT-SW280A User Manual

							Chapter 4 Settings —
 [NETWORK/USB] menu
ENGLISH - 81
2) Press qw to switch the item.
 
f The items will switch each time you press the button.
[NAME ORDER]Sort files or folders in name order.
[TIME ORDER]Sort files or folders in stored time order.
[SIZE ORDER]Sort files or folders in amount of data order.
[EXTEND ORDER]Sort files or folders in extended order.
[ROTATE]
Set the rotate direction of image.
1) Press as to select [ROTATE].
2) Press qw to switch the item.
 
f The items will switch each time you press the button.
[NO ROTATE]Rotate is disabled.
[90 DEGREE] Rotates 90 degrees in clockwise direction.
[180 DEGREE]Rotates 180 degrees.
[270 DEGREE] Rotates 270 degrees in clockwise direction.
[BEST FIT]
Set the image whether or not to fit with the projected screen.
1) Press as to select [BEST FIT].
2) Press qw to switch the item.
 
f The items will switch each time you press the button.
[OFF] Displays in the normal pixels of the image.
[ON] Displays the image to fit with the aspect of the projected screen.
[ R E P E AT ]
Set whether or not to play the slide show repeatedly.
1) Press as to select [REPEAT].
2) Press qw to switch the item.
 
f The items will switch each time you press the button.
[OFF] Return to the thumbnail display after the last file is broadcasted.
[ON] Repeat broadcast the first file after the last file is broadcasted.
[APPLY]
Executes the setting in slide show.
1) Press as to select [APPLY].
2) Press the  button.
 
f The setting of the items except for [SET SLIDE] will be effective.   
						

							Chapter 4 Settings —
 [NETWORK/USB] menu
82 - ENGLISH
[STATUS]
Display the status of the projector network.
1) Press as to select [STATUS].
2) Press the  button.
 
f The [STATUS] screen is displayed.
[WIRELESS LAN][SSID]*1Displays the character string of SSID.
[IP ADDRESS]*1Displays the IP address.
[Presenter Light][LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic Pro 
used.
*1 
The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100E) of the optional accessories 
is inserted. 
Note
 
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model 
No.: ET-WML100E) of the optional accessories is inserted to the projector, please set the wireless LAN by accessing the projector via a 
computer. For details, please refer to 
“
Web control function ”
 →
 “
[Network config] page ”
 ( x
 page 96).
[INITIALIZE] 
This function is used to return various setting values of [NETWORK] to t\
he factory default value.
1) Press as to select [INITIALIZE].
2) Press the  button.
 
f The [INITIALIZE] screen is displayed.
3) Press qw to select [OK] and then press the  button.  
						

							ENGLISH - 83
Chapter 5 Operation of Function
This chapter describes the operation methods of some functions.  
						

							Chapter 5 Operation of Function —
 About Memory Viewer function
84 - ENGLISH
About Memory Viewer function
The Memory Viewer function makes it is possible to project the still image stored in\
 the USB memory.
What you can project with the Memory Viewer function
Memory Viewer function supports the following image files.
Picture
ExtensionFormatDescription
jpg / jpegBaseline coding 24 bits
Progressive RGB 24 bits Resolution : 8 x 8 ~ 10 000 x 10 000
Resolution : 8 x 8 ~ 1 280 x 800
bmpPalette-based 1, 4, 8 bits, RGB 24, 32 bits The maximum resolution : 
 
1 280 x 800
pngTrue color 24 bits/48 bits The maximum resolution : 
 
1 280 x 800
gifPalette-based 1, 4, 8 bits Palette - 24 bits color spaces;
The maximum resolution :   
1 280 x 800
tif / tiffThe maximum resolution :   
1 280 x 800
Note
 
f The maximum size of file is 2 GB.
 
f The total number of folders/files that can be displayed is about 500 at the maximum. In addition, other than the supported format as the 
above table cannot be displayed.
 
f You cannot play the files which is protected by Digital Rights Management (DRM).
 
f It maybe impossible to resume playing even if the file is recorded in the supported format.
Cautions on using USB Memory
Please observe the following.
 
f Do not put USB memory or its cap within close reach of children. Swallow\
ing them may cause suffocation.
 
f If the smoke or questionable odor rise, remove the USB memory from the p\
rojector, and then contact your dealer.
 
f Do not put water, chemical or oil to the USB memory. It may cause short out or fire.
 
f Do not put foreign objects or put metal objects to the USB terminal. Sta\
tic electricity may cause data loss or data corruption.
 
f Do not remove the USB memory from the computer or the projector while th\
e USB memory is reading out or writing the data.
It may cause data loss or data corruption.
 
f Do not store the USB memory where high temperature, humid or dusty place\
 or magnetized items are around.
Note
 
f It is compatible with the USB memory sold in the market.
 
f It cannot be used the other format other than the formatted with FAT16 and FAT32.
Inserting the USB memory
1) Insert the USB memory directly into the  terminal.
Attention
 
f When inserting the USB memory, confirm the direction of the plug and do not damage the terminal.
Removing the USB memory
1) Make sure that the USB memory is not flashing, and then unplug it.
Attention
 
f Please note following points when removing the USB memory.
 
g The indicator of the USB memory is blinking means that the projector is \
reading out the data. Do not remove the USB memory while it is 
blinking.
 
g When using a USB memory without an indicator, you cannot recognize when the projector reading out the data. Please r\
emove it from the 
projector after closing the memory viewer function or turning off the projector.
 
g Do not insert and remove the USB memory in a short time. Remove the USB memory at least five seconds after inserting. 
And insert it 
at least five seconds after removing. When inserting or removing the USB memory , the projector takes about five seconds to identify the 
operation.
Note
 
f The USB memory can be inserted or removed regardless of the power status\
 of the projector.  
						

							Chapter 5 Operation of Function —
 About Memory Viewer function
ENGLISH - 85
Displaying the Memory Viewer screen
1) Press the  button on the remote control or switch the input source to [MEM\
ORY 
VIEWER].
 
f Press the  button on the control panel and select the input source in the \
Input menu.
2) Insert the USB memory directly into the  terminal.
 
f The standby screen 
“
please press ENTER ”
 is displayed while the USB memory icon is displayed at the lower left of the 
screen.
 
f When the partition are separated in USB memory, several USB icons will be displayed.
3) Press the  button on the remote control.
 
f The root directory of the USB memory will be displayed in thumbnail on t\
he screen.
Playing the pictures
It will display a picture when play the picture manually every time.
1) Press asqw on the remote control to select a file.
2) Press the  button on the remote control.
 
f The picture will display on the full screen.
3) Press w to switch to the next picture, press q to return to the previous picture.
4) Press the  button on the remote control.
 
f Return to the thumbnail screen.
Executing the slide
All pictures in the same folder will play automatically when [SORT ORDER] and [SLIDE TRANSITION EFFECT] and so on of 
[MEMORY VIEWER LIGHT] menu are set to the special setting.
1) Press asqw on the remote control to select a file.
2) Press the  button to select the [MEMORY VIEWER LIGHT] 
→
 [SET SLIDE].
3) Press the  button on the remote control.
 
f The picture will display on the full screen.
 
f Press the  button to return to the thumbnail screen.
Note
 
f If you press the  button during the slide show, the image will stop and the a menu displays. The playing will continue when the 
menu disappears.
Termination of the Memory Viewer
1) Press asqw to select the thumbnail which is displayed on the upper left corner.
2) Press the  button on the remote control.
 
f Return to the standby screen 
“
please press ENTER ”
.  
						

							Chapter 5 Operation of Function —
 Network connections
86 - ENGLISH
Network connections
This projector has network function that allows the following by connect\
ing a computer. The wireless module   
(Model No.: ET-WML100E) of the optional accessories is required if the wireless LAN is connected.
 
f
WEB control 
By accessing the projector from a computer, you can perform setting, adjustment, status display, etc. of the 
projector. Refer to  “
W
 eb control function”
 (
x  page 91) for details.
 
f
Presenter Light 
By using still image transfer application software  “
Presenter Light ”
 that supports Windows computers, you can 
transfer images and audio to the projector via the wired LAN/wireless LA\
N. For details, please refer to the 
operating instructions for  “
Presenter Light ”
 included in the supplied CD-ROM. 
 
f
VueMagic Pro 
By using still image transfer application software  “
V
 ueMagic Pro”
, you can transfer images to the projector when 
iPad/iPhone/iPod touch or Android terminals are connected to this projector through the wireless L\
AN. Refer to 
“ About V
 ueMagic Pro ”
 (
x  page 90) for details.
When connecting via wireless LAN
The wireless module (Model No.: ET-WML100E) of the optional accessories is required if you want to use the network func
-
tion through the wireless LAN.  
f Only one projector can be connected with the wireless LAN.
Connection example
IEEE802.11b/g/n
Wireless module of optional accessories
(Model No.: ET-WML100E)
Preparation and confirmation of the projector
1) Turn on the projector.
2) Insert the wireless module (Model No.: ET-WML100E) of optional accessories firmly into the  terminal.
Wireless module of optional 
accessories
(Model No.: ET-WML100E)   
						

							Chapter 5 Operation of Function —
 Network connections
ENGLISH - 87
3) Press the  button to switch to NETWORK input.
 
f The network input idle screen is displayed.
 The login password (a four-digit number that is automatically 
generated), PROJECTOR NAME, SSID and IP ADDRESS (WIRELESS) will be displayed in the idle screen.
LOGIN PASSWORD :   5678
PROJECTOR NAME :   Name1234
SSID :      Panasonic Projector
IP ADDRESS(WIRELESS) :   172.28.120.1
 
f LOGIN PASSWORD
 
f PROJECTOR NAME
 
f SSID
 
f IP ADDRESS(WIRELESS) Network input idle screen
Attention
 
f Please do not move or transport the projector while the wireless module \
is attached. Doing so may cause the wireless module to be 
damaged.
 
f The indicator of the wireless module will be off when the projector is in standby mode, it will light in blue when the \
power is turned on and it 
will blink in blue during wireless communicating.
 
Please do not remove the wireless module while the indicator is blinking\
.
 
f When the power of the projector is turned on and the indicator of the wi\
reless module is not lighting/blinking, please insert the wireless 
module to the  terminal again.
 
f The [IP ADDRESS (WIRELESS)] is displayed after the power is turned on, please connect network to the projector.
Note
 
f The settings of the wireless module are as follows. You can access the projector from the web browser to set the values of [SSID], [CHANNEL] 
and [ENCRYPTION]. 
[SSID]Network Statusxxxx
(xxxx stands for a four-digit number 
and varies by each product.)
[CHANNEL]1
[IP ADDRESS]172.28.120.1
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]0.0.0.0
[ENCRYPTION]WPA2-PSK(AES)
[KEY]panasonic
Computer setting
1)  Turn on the computer.
2) Make the network setting according to your system administrator.
 
f Please make the network settings for the computer and the projector acco\
rding to your system 
administrator.
3) Connect to the network that has been set in the projector.
 
f If you use a computer, click on the task tray  (bottom right of the computer), then select the same name as the SSID that has been set in the projector.
Note
 
f If you use any wireless LAN connection utility that meets the OS standar\
d, follow the operation instruction of the utility to connect it.   
						

							Chapter 5 Operation of Function —
 About Presenter Light
88 - ENGLISH
About Presenter Light
The wireless module (Model No.: ET-WML100E) of the optional accessories is required if you want to use the 
network function through the wireless LAN.
By using still image transfer application software  “
Presenter Light ”
 that supports Windows computers, you can 
transfer images and audio to the projector via the wired LAN/wireless LA\
N. 
Download the  “
Presenter Light ”
 to your computer
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
 
f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the 
password is panasonic (lower case).
4) Click [OK].
 
f The [Projector status] page is displayed.
5) Click [Download].
 
f The download screen of 
“
Presenter Light ”
 is displayed.
6) Click [Download].
 
f The download confirmation screen of the executable file 
“
Presenter Light.exe ”
 is displayed.   
						

							Chapter 5 Operation of Function —
 About Presenter Light
ENGLISH - 89
7) Save  “
Presenter Light.exe ”
 on the computer desktop.
 
f This software is used as the executable file format. It cannot be installed in the computer
.
 
f Execute this file when using the software. Please save this software or make a shortcut for convenient use.
Note
 
f For more details about how to use the software 
“
Presenter Light ”
, please refer to the operating instructions of  “
Presenter Light Software ”
 of 
the supplied CD-ROM.
 
f Download the latest versions of 
“
Presenter Light ”
 software from the following web site.  
URL http://panasonic.net/avc/projector/   
						

							Chapter 5 Operation of Function —
 About VueMagic Pro
90 - ENGLISH
About VueMagic Pro
The wireless module (Model No.: ET-WML100E) of the optional accessories is required.
By using still image transfer application software  “
VueMagic Pro ”
, you can transfer images to the projector when 
iPad/
iPhone/iPod touch or Android terminals are connected to this projector through the wireless L\
AN.
Connecting with the VueMagic Pro compatible device
1) Press the  button to select [NETWORK]. 
 
f Switch to the NETWORK input and the NETWORK input idle screen is display\
ed.
 
f Check the login password (a four-digit number that is automatically generated), SSID and the IP
 address 
(wireless LAN) which are displayed on the NETWORK input idle screen.
 
f You can also press the  button on the control panel to select [
NETWORK] in the input 
guide.
2) Choose the SSID of this projector on the wireless LAN setting screen of \
the connected device, and then 
connect the wireless.
3) Start the VueMagic Pro mobile presenter application of the correspondent VueMagic Pro devices.
4) Choose the projector name of this projector in the projector list. 
 
f The connection confirmation screen is displayed.
5) Choose the display position.
 
f The password entry screen is displayed.
6) Enter the login password and click [OK].
 
f The connected device screen is projected on the screen.
Note
 
f When connecting to the iOS device or Android device, you must install the dedicated application 
“
V ueMagic Pro”
 to the device. For detailed 
information, refer to the following web site. (Only in English.)  
URL http://vuemagic.pixelworks.com
Disconnecting with the VueMagic Pro compatible device
Close the VueMagic Pro mobile presenter application of the device by clicking the .