Panasonic Projector PT-SX320A User Manual
Have a look at the manual Panasonic Projector PT-SX320A User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 106
Chapter 6 Maintenance —
Care and Replacement (continued)
106 - ENGLISH
8) Press the button on the remote control or the control panel.
f The main menu screen appears.
9) Press as to select [PROJECTOR SETUP] and press the button.
f The [PROJECTOR SETUP] screen is displayed.
10) Press as to select [LAMP RUNTIME].
11) Press and hold the button for approximately 3 seconds.
f The [LAMP RUNTIME RESET] screen is displayed.
12) Press qw to select [OK] and press the button.
13) Press the power...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-105.png "Page 106
Chapter 6 Maintenance —
Care and Replacement (continued)
106 - ENGLISH
8) Press the button on the remote control or the control panel.
f The main menu screen appears.
9) Press as to select [PROJECTOR SETUP] and press the button.
f The [PROJECTOR SETUP] screen is displayed.
10) Press as to select [LAMP RUNTIME].
11) Press and hold the button for approximately 3 seconds.
f The [LAMP RUNTIME RESET] screen is displayed.
12) Press qw to select [OK] and press the button.
13) Press the power...")
![Page 107
Chapter 6 Maintenance —
Troubleshooting
ENGLISH - 107
Troubleshooting
Review the following points. For details, see the corresponding pages.
ProblemsPoints to be checkedPage
Power does not turn on.
f Is the power plug firmly inserted into the outlet?
―
f Is the wall outlet supplying electricity?
―
f Have the circuit breakers tripped?
―
f Is the lamp indicator or the temperature indicator lit or \
blinking?
101
f Is the lamp cover attached securely?
105
No image appears.
f Are connections to...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-106.png "Page 107
Chapter 6 Maintenance —
Troubleshooting
ENGLISH - 107
Troubleshooting
Review the following points. For details, see the corresponding pages.
ProblemsPoints to be checkedPage
Power does not turn on.
f Is the power plug firmly inserted into the outlet?
―
f Is the wall outlet supplying electricity?
―
f Have the circuit breakers tripped?
―
f Is the lamp indicator or the temperature indicator lit or \
blinking?
101
f Is the lamp cover attached securely?
105
No image appears.
f Are connections to...")
![Page 109
Chapter 7 Appendix —
Technical information
ENGLISH - 109
Technical information
terminal
The terminal of the projector conforms with RS-232C so that the project\
or can be connected to and
controlled from a computer.
Connection
D-Sub 9p (female)
D-Sub 9p (male) Computer
Communication cable (straight)
Projector connecting terminals
Note
f When [STANDBY MODE] is set to [ECO], the projector cannot be controlled during standb\
y.
Pin assignments and signal names
D-Sub 9-pin (female)Outside viewPin...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-108.png "Page 109
Chapter 7 Appendix —
Technical information
ENGLISH - 109
Technical information
terminal
The terminal of the projector conforms with RS-232C so that the project\
or can be connected to and
controlled from a computer.
Connection
D-Sub 9p (female)
D-Sub 9p (male) Computer
Communication cable (straight)
Projector connecting terminals
Note
f When [STANDBY MODE] is set to [ECO], the projector cannot be controlled during standb\
y.
Pin assignments and signal names
D-Sub 9-pin (female)Outside viewPin...")
![Page 110
Chapter 7 Appendix —
Technical information
110 - ENGLISH
Basic format
Transmission from the computer starts with STX, then the ID, command, par\
ameter, and ETX are sent in this
order. Add parameters according to the details of control.
（2 byte
）
2 ID characters (2 bytes) Semi-colon(1 byte) Colon(1 byte)
3 command characters (3 bytes) Parameter (undefined length)
Start (1 byte) ZZ, 01 to 06
ID designate
End (1 byte)
Basic format (has subcommands)
Parameter (6 bytes)*
Symbol “+” or “-” (1 byte) and set...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-109.png "Page 110
Chapter 7 Appendix —
Technical information
110 - ENGLISH
Basic format
Transmission from the computer starts with STX, then the ID, command, par\
ameter, and ETX are sent in this
order. Add parameters according to the details of control.
（2 byte
）
2 ID characters (2 bytes) Semi-colon(1 byte) Colon(1 byte)
3 command characters (3 bytes) Parameter (undefined length)
Start (1 byte) ZZ, 01 to 06
ID designate
End (1 byte)
Basic format (has subcommands)
Parameter (6 bytes)*
Symbol “+” or “-” (1 byte) and set...")
![Page 111
Chapter 7 Appendix —
Technical information
ENGLISH - 111
Cable specification
1 NC NC 1
2 2
3 3
4 NC NC 4
5 5
6 NC NC 6
7 7
8 8
9 NC NC 9
When connected to a computer
Projector
( terminal )Computer
(DTE Specifications）
Control command
The following table lists the commands that can be used to control the p\
rojector using a computer.
rProjector control command
CommandDetailsParameter/response stringRemark (parameter)
PONPower on―To check if the power is on, use the “
Power query ”
command....](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-110.png "Page 111
Chapter 7 Appendix —
Technical information
ENGLISH - 111
Cable specification
1 NC NC 1
2 2
3 3
4 NC NC 4
5 5
6 NC NC 6
7 7
8 8
9 NC NC 9
When connected to a computer
Projector
( terminal )Computer
(DTE Specifications）
Control command
The following table lists the commands that can be used to control the p\
rojector using a computer.
rProjector control command
CommandDetailsParameter/response stringRemark (parameter)
PONPower on―To check if the power is on, use the “
Power query ”
command....")
![Page 112
Chapter 7 Appendix —
Technical information
112 - ENGLISH
[MENU LOCK PASSWORD] operations
7RLQLWLDOL]H\RXUSDVVZRUGFRQVXOW\RXUGLVWULEXWRU
List of compatible signals
The following table specifies the video signals compatible with the projector .
f Symbols that indicate formats are as follows.
g V: VIDEO, Y/C
g R: RGB
g Y: YC
BCR/YPBPR
g H: HDMI
Mode Display resolution
(dots) Scanning frequency
Dot clock
frequency
(MHz) Format Plug and play*
1
Horizontal
(kHz) Vertical
(Hz) COMPUTER...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-111.png "Page 112
Chapter 7 Appendix —
Technical information
112 - ENGLISH
[MENU LOCK PASSWORD] operations
7RLQLWLDOL]H\RXUSDVVZRUGFRQVXOW\RXUGLVWULEXWRU
List of compatible signals
The following table specifies the video signals compatible with the projector .
f Symbols that indicate formats are as follows.
g V: VIDEO, Y/C
g R: RGB
g Y: YC
BCR/YPBPR
g H: HDMI
Mode Display resolution
(dots) Scanning frequency
Dot clock
frequency
(MHz) Format Plug and play*
1
Horizontal
(kHz) Vertical
(Hz) COMPUTER...")
![Page 114
Chapter 7 Appendix —
Specifications
114 - ENGLISH
Specifications
The specifications of the projector are as follows.
Power supply100 V - 240 V (100 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
Projecting295W (3.5 A - 1.3 A)
In standby modeWhen [STANDBY MODE] of [ECO MANAGEMENT] is set to [ECO]: 0.5 W
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL], and [MUTE] in [AUDIO
SETTING] is set to [ON]: 8 W
LCD panel
SizePT-SX320A, PT-SX300A 1.60 cm (0.63″
) (aspect ratio 4:3)...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-113.png "Page 114
Chapter 7 Appendix —
Specifications
114 - ENGLISH
Specifications
The specifications of the projector are as follows.
Power supply100 V - 240 V (100 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
Projecting295W (3.5 A - 1.3 A)
In standby modeWhen [STANDBY MODE] of [ECO MANAGEMENT] is set to [ECO]: 0.5 W
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL], and [MUTE] in [AUDIO
SETTING] is set to [ON]: 8 W
LCD panel
SizePT-SX320A, PT-SX300A 1.60 cm (0.63″
) (aspect ratio 4:3)...")
![Page 115
Chapter 7 Appendix —
Specifications
ENGLISH - 115
Remote control
Power supplyDC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operating rangeApprox.7 m (22'11-5/8") (when operated directly in front of signal receiver)
Weight63
] (2.22 ozs.) (including batteries)
DimensionsWidth: 44 mm (1-23/32"), Length: 105 mm (4-1/8"), Height: 20.5 mm (13/16")
*1 Measurement, measuring conditions and method of notation all comply with\
ISO/IEC 21118:2012 international standards.
*2 Average value. Weight...](http://img.usermanuals.tech/thumb/58/100568/w64_projector_manual_9664_d-114.png "Page 115
Chapter 7 Appendix —
Specifications
ENGLISH - 115
Remote control
Power supplyDC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operating rangeApprox.7 m (22'11-5/8\") (when operated directly in front of signal receiver)
Weight63
] (2.22 ozs.) (including batteries)
DimensionsWidth: 44 mm (1-23/32\"), Length: 105 mm (4-1/8\"), Height: 20.5 mm (13/16\")
*1 Measurement, measuring conditions and method of notation all comply with\
ISO/IEC 21118:2012 international standards.
*2 Average value. Weight...")
Chapter 7 Appendix — Technical information ENGLISH - 111 Cable specification 1 NC NC 1 2 2 3 3 4 NC NC 4 5 5 6 NC NC 6 7 7 8 8 9 NC NC 9 When connected to a computer Projector ( terminal )Computer (DTE Specifications） Control command The following table lists the commands that can be used to control the p\ rojector using a computer. rProjector control command CommandDetailsParameter/response stringRemark (parameter) PONPower on―To check if the power is on, use the “ Power query ” command. POF Power standby QPW Power query 000 001STANDBY Power on IIS Switching the input signal VID VIDEO RG1 COMPUTER HD1 HDMI NWP NETWORK MV1 MEMORY VIEWER AUU Volume up AUD Volume down Q$L Lamp cumulative runtime query 1 Returned with 0 to 99999 OSH AV mute control 0AV mute function off QSH AV mute status query 1AV mute function on Q$S Lamp condition query 0 1 2 3Stand-by Lamp ON control active Lamp ON Lamp OFF control active VSE Aspect ratio switch 0 AUTO 1 NORMAL 2 WIDE 5 NATIVE QS1 Aspect ratio settings query 6 FULL 9 H FIT 10 V FIT rProjector control command (with sub command) CommandSub commandDetailsRemark VXX RYCI1COMPUTER1 input setting +00000=RGB/YPBPR, +00001=Y/C
Chapter 7 Appendix — Technical information 112 - ENGLISH [MENU LOCK PASSWORD] operations 7RLQLWLDOL]H\RXUSDVVZRUGFRQVXOW\RXUGLVWULEXWRU List of compatible signals The following table specifies the video signals compatible with the projector . f Symbols that indicate formats are as follows. g V: VIDEO, Y/C g R: RGB g Y: YC BCR/YPBPR g H: HDMI Mode Display resolution (dots) Scanning frequency Dot clock frequency (MHz) Format Plug and play* 1 Horizontal (kHz) Vertical (Hz) COMPUTER HDMI “ NTSC/NTSC4.43/ PAL-M/PAL60 ”720 x 480i 15.7 59.9 ― V ― ― PAL/PAL-N/SECAM 720 x 576i15.6 50.0 ― V ― ― 525 (480)/60i 720 x 480i15.7 59.9 13.5 R/Y ― ― 625 (576)/50i 720 x 576i15.6 50.0 13.5 R/Y ― ― 525 (480)/60i 720(1440) x 480i *215.7 59.9 27.0 H ― ― 625 (576)/50i 720(1440) x 576i *215.6 50.0 27.0 H ― ― 525 (480)/60p 720 x 48031.5 59.9 27.0 R/Y/H ― l 625 (576)/50p 720 x 57631.3 50.0 27.0 R/Y/H ― l 750 (720)/60p 1280 x 72045.0 60.0 74.3 R/Y/H ― l 750 (720)/50p 1280 x 72037.5 50.0 74.3 R/Y/H ― l 1125 (1080)/60i 1920 x 1080i33.8 60.0 74.3 R/Y/H ― l 1125 (1080)/50i 1920 x 1080i28.1 50.0 74.3 R/Y/H ― l 1125 (1080)/24p 1920 x 108027.0 24.0 74.3 R/Y/H ― l 1125 (1080)/24sF 1920 x 1080i27.0 48.0 74.3 R/Y/H ― ― 1125 (1080)/25p 1920 x 1080 28.1 25.0 74.3 R/Y/H ― ― 1125 (1080)/30p 1920 x 108033.8 30.0 74.3 R/Y/H ― ― 1125 (1080)/60p 1920 x 108067.5 60.0 148.5 R/Y/H ― l 1125 (1080)/50p 1920 x 108056.3 50.0 148.5 R/Y/H ― l 640x400 640 x 400 31.5 70.1 25.2 R/H ― ― 640 x 400 37.9 85.1 31.5 R/H ― ― 640x480 640 x 480 31.5 59.9 25.2 R/H l l 640 x 480 35.0 66.7 30.2 R/H ― ― 640 x 480 37.9 72.8 31.5 R/H l l 640 x 480 37.5 75.0 31.5 R/H l l 640 x 480 43.3 85.0 36.0 R/H ― ― 800 x 600 800 x 600 35.2 56.3 36.0 R/H l l 800 x 600 37.9 60.3 40.0 R/H l l 800 x 600 48.1 72.2 50.0 R/H l l 800 x 600 46.9 75.0 49.5 R/H l l 800 x 600 53.7 85.1 56.3 R/H ― ―
Chapter 7 Appendix — Technical information ENGLISH - 113 Mode Display resolution (dots) Scanning frequency Dot clock frequency (MHz) Format Plug and play* 1 Horizontal (kHz) Vertical (Hz) COMPUTER HDMI 832 x 624 832 x 62449.7 74.6 57.3 R/H l l 1024 x 768 1 024 x 768 39.6 50.0 51.9 R/H ― ― 1 024 x 768 48.4 60.0 65.0 R/H ― ― 1 024 x 768 56.5 70.1 75.0 R/H l l 1 024 x 768 60.0 75.0 78.8 R/H l l 1 024 x 768 68.7 85.0 94.5 R/H ― ― 1152 x 864 1 152 x 864 53.7 60.0 81.6 R/H ― ― 1 152 x 864 67.5 75.0 108.0 R/H ― ― 1 152 x 864 77.1 85.0 119.7 R/H ― ― 1152 x 870 1 152 x 87068.7 75.1 100.0 R/H l l 1280 x 720 1 280 x 720 37.1 49.8 60.5 R/H ― ― 1 280 x 720 44.8 59.9 74.5 R/H ― ― 1280 x 768 1 280 x 768 60.3 74.9 102.3 R/H ― ― 1 280 x 768 68.6 84.8 117.5 R/H ― ― 1280 x 800 1 280 x 800 41.3 50.0 68.0 R/H ― ― 1 280 x 800 49.7 59.8 83.5 R/H l*4l*4 1 280 x 800 62.8 74.9 106.5 R/H ― ― 1 280 x 800 71.6 84.9 122.5 R/H ― ― 1280 x 960 1 280 x 96060.0 60.0 108.0 R/H ― ― 1280 x 1024 1 280 x 1 024 64.0 60.0 108.0 R/H ― ― 1 280 x 1 024 80.0 75.0 135.0 R/H ― ― 1 280 x 1 024 91.1 85.0 157.5 R/H ― ― 1366 x 768 1 366 x 768 39.6 49.9 69.0 R/H ― ― 1 366 x 768 47.7 59.8 85.5 R/H ― ― 1400 x 1050 1 400 x 1 050 65.2 60.0 122.6 R/H ― ― 1 400 x 1 050 65.3 60.0 121.8 R/H ― ― 1 400 x 1 050 82.3 74.9 156.0 R/H ― ― 1440 x 900 1 440 x 90055.9 59.9 106.5 R/H ― ― 1600 x 900 1 600 x 900 46.4 49.9 96.5 R/H ― ― 1 600 x 900 55.9 60.0 119.0 R/H ― ― 1600 x 1200 1 600 x 1 20075.060.0162.0 R/H l l 1680 x 1050 1 680 x 1 050 54.1 50.0 119.5 R/H ― ― 1 680 x 1 050 65.3 60.0 146.3 R/H ― ― 1920 x 1080 1 920 x 1 080 55.6 49.9 141.5 R/H ― ― 1 920 x 1 080*366.6 59.9 138.5 R/H ― ― 1920 x 1200 1 920 x 1 200 61.8 49.9 158.3 R/H ― ― 1 920 x 1 200 *374.0 60.0 154.0 R/H ― ― *1 Signals with l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector . A signal, which has no l in the Plug and play columns but has an entry in the Format column, can\ be input. For signals without l in the Plug and play columns, resolution may not be selected in the computer even though\ the projector supports them. *2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only *3 VESA CVT-RB (Reduced Blanking)-compliant *4 Only for PT-SW280A Note f The number of display dots for PT-SX320A/PT-SX300A is 1 024 x 768. The number of display dots for PT-SW280A is 1 280 x 800. A signal with a different resolution is converted to the number of display dots. f The “ i” at the end of the resolution indicates an interlaced signal. f When interlaced signals are connected, flickering may occur on the projected image. f Even the above signals exist, some image signals that are recorded in special m\ ethod may not be displayed.
Chapter 7 Appendix — Specifications 114 - ENGLISH Specifications The specifications of the projector are as follows. Power supply100 V - 240 V (100 V - 240 V alternating current), 50 Hz/60 Hz Power consumption Projecting295W (3.5 A - 1.3 A) In standby modeWhen [STANDBY MODE] of [ECO MANAGEMENT] is set to [ECO]: 0.5 W When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL], and [MUTE] in [AUDIO SETTING] is set to [ON]: 8 W LCD panel SizePT-SX320A, PT-SX300A 1.60 cm (0.63″ ) (aspect ratio 4:3) PT-SW280A 1.50 cm (0.59″ ) (aspect ratio 16:10) Display systemTranslucent screen LCD panel 3 panels, 3 primary color system Drive systemActive matrix Number of pixelsPT-SX320A, PT-SX300A 786 432 pixels (1 024 x 768 dots) x 3 panels PT-SW280A 1 024 000 pixels (1 280 x 800 dots) x 3 panels Lens Manual zoom (1.2 x)/Manual focus F = 1.65 - 1.93 f = 18.53 mm - 22.18 mm Luminous lamp230 W, UHM lamp Light output*1 PT-SX320A3 200 lm PT-SX300A 3 000 lm PT-SW280A 2 800 lm Contrast ratio*12 000:1 (when [PICTURE MODE] is set to [DYNAMIC], [LAMP POWER] is set to [NORMAL], and [AUTO POWER SAVE] is set to [OFF]) Color system7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60) Projected image size33 type - 300 type Screen aspect ratioPT-SX320A, PT-SX300A4:3 PT-SW280A 16:10 Projection method[FRONT/CEILING], [FRONT/DESK], [REAR/CEILING], [REAR/DESK] Speaker4 cm x 2 cm, x 1 Max. effective audio output1 W (monaural) Power cord length2 m (78-19/25") Outer caseMolded plastic Dimensions Width307 mm (12-3/32") Height69 mm (3-14/50") (excluding the projecting parts) Depth210 mm (8-17/25") WeightApprox.2.3 k ] (5.1 lbs.)*2 Operating environment Operating environment temperature*3 0 ° C (32 ° F) - 40 ° C (104 ° F) (Elevation: below 1 400 m (4 593')) 0 ° C (32 ° F) - 35 ° C (95 ° F) (Elevation: 1 400 m (4 593') - 2 700 m (8 858')) Operating environment humidity20 % - 80 % (No condensation)
Chapter 7 Appendix — Specifications ENGLISH - 115 Remote control Power supplyDC 3 V (AAA/R03 or AAA/LR03 battery x 2) Operating rangeApprox.7 m (22'11-5/8") (when operated directly in front of signal receiver) Weight63 ] (2.22 ozs.) (including batteries) DimensionsWidth: 44 mm (1-23/32"), Length: 105 mm (4-1/8"), Height: 20.5 mm (13/16") *1 Measurement, measuring conditions and method of notation all comply with\ ISO/IEC 21118:2012 international standards. *2 Average value. Weight varies for each product. *3 If the [PROJECTOR SETUP] menu → [LAMP POWER] is set to [NORMAL], [LAMP POWER] changes to [ECO] forcibly to protect the projector when the operating environment temperature becomes 35 ° C (95 ° F) or higher. Note f The model numbers of accessories and optional accessories are subject to\ change without prior notice. rTerminal terminal 1 set high-density D-Sub 15 p (female) RGB signal0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω ) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible (The SYNC/HD and VD terminals do not support 3 value SYNC.) YPBPR signalY: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω Y/C signalY: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω terminal1 set, pin jack 1.0 V [p-p] 75 Ω terminal1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible Audio signalLinear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz) terminal1 sets, M3 stereo mini jack 0.5 V [rms], input impedance 22 k Ω or more terminal1 set, D-Sub 9 p, RS-232C compliant, for computer control terminalUSB connector (type A x 1, output DC 5 V, 500 mA maximum) Memory Viewer / Wireless module (Model No.: ET-WML100E) compatible rApplicable scanning frequency Refer to “ List of compatible signals ” ( x page 11 2 ) for the types of video signals that can be used with the projector. For video signalHorizontal: 15.73 kHz Vertical : 59.94 Hz, Horizontal: 15.63 kHz Vertical : 50 Hz For Y/C signalHorizontal: 15.73 kHz Vertical : 59.94 Hz, Horizontal: 15.63 kHz Vertical : 50 Hz For RGB signal f Displayable resolution: 640 x 400 to 1 920 x 1 200 f Dot clock frequency: 162 MHz or less For YCBCR/YPBPR signal f Displayable resolution: 480i/576i to 1 920 x 1 080 f Dot clock frequency: 148.5 MHz or less For HDMI signal f Displayable resolution for movie-based signals: 480i/576i*1 to 1 920 x 1 080 Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced) f Dot clock frequency: 25 MHz - 162 MHz *1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Chapter 7 Appendix — Dimensions 116 - ENGLISH Dimensions Unit: mm 307 (12-2/23) 79.2 (3-2/17) 178.2 (7-1/63)93.5 (3-15/22) 76.5 (3)7.5 (2/7) 3.5 (3/22)80 (3-3/20) 69 (2-5/7-) 11 (13/30) 49.2 (1-15/16) 210 (8-3/11) PT-SX320A * Actual dimensions may differ depending on the product.
Chapter 7 Appendix — Precautions for Attaching Ceiling Mount Bracket ENGLISH - 117 Precautions for Attaching Ceiling Mount Bracket f When installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket as the following: E T- PKB2 (Ceiling Mount Bracket). f When installing the projector, attach the drop-prevention wire supplied with the the Ceiling Mount Br\ acket. f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling. f Panasonic takes no responsibility for any accident, damage, damages to t\ he projector resulting from use of a ceiling mount bracket not manufactured by Panasonic, optional Ceiling Mount Bracket combinations not specified , installation method not described in installation manual, optional accessories not specified or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired. f Unused products must be removed promptly by a qualified technician. f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or impact screwdrivers. f Read the Installation Instructions for the Ceiling Mount Bracket for det\ ails. f The model numbers of accessories and optional accessories are subject to\ change without prior notice. Bottom viewModel No. of Ceiling Mount Bracket: E T- PKB2 (Ceiling Mount Bracket) Torque: (M4) 1.25 ± 0.2 N · m8 mm (5/16") M4
Index 118 - ENGLISH Index A About Memory Viewer function .......84 About Presenter Light ..............88 About VueMagic Pro ...............90 Accessories ...................... 18 terminal ................. 21 Adjusting adjustable feet ............29 Adjusting the image ...............41 [ADVANCED MENU] ...............54 [ASPECT] ....................... 60 terminal .............. 23 [AUDIO SETTING] ................ 74 button Remote control .............. 20, 43 [AUTO SETUP SETTING] ...........66 button Remote control .............. 20, 42 B [BACK COLOR] .................. 67 [BRIGHTNESS] ................... 52 C Care and Replacement ............102 Cautions on use .................. 17 Cautions when installing ............12 Cautions when transporting .........12 CD-ROM ........................ 19 Changing the display language .......62 CLEANING THE PROJECTOR .....102 Clean the air filter ................ 102 [CLOCK PHASE] ................. 60 [CLOSED CAPTION SETTING] ......64 [COLOR] ........................ 53 [COLOR TEMPERATURE] ..........53 button Remote control .............. 20, 40 [COMPUTER INPUT SETTING] ......70 terminal ..........23 Connecting the power cord ..........34 Connection ...................... 30 [CONTRAST] .................... 52 [CONTROL DEVICE SETUP] ........79 D button Remote control .............. 20, 49 button Remote control .............. 20, 44 [DAYLIGHT VIEW] ................ 54 Dimensions ..................... 11 6 [DISPLAY OPTION] ............50, 63 Disposal ........................ 17 [DOT CLOCK] .................... 59 E [ECO MANAGEMENT] .............72 [EMULATE] ...................... 73 button Projector body ................. 23 Remote control ................. 20 F [FILTER COUNTER] ...............76 [FRAME LOCK] ................... 61 button Remote control .............. 20, 43 button Projector body ................. 23 Remote control .............. 20, 45 [FUNCTION BUTTON] ............. 74 H button Remote control .............. 20, 40 terminal ............... 23 [HDMI SIGNAL LEVEL] .............64 I button Remote control .............. 20, 46 button Remote control .............. 20, 46 [INITIAL START UP] . . . . . . . . . . . . . . .71 [INITIALIZE] ..................... 82 [INITIALIZE ALL] .................. 76 button Projector body ................. 23 Remote control .............. 20, 40 Installation mode .................. 26 L Lamp indicator .................. 101 [LAMP POWER] .................. 71 [LAMP RUNTIME] ................. 71 [LANGUAGE] ................. 50, 62 List of compatible signals ..........11 2 M Main menu ...................... 49 button Remote control .............. 20, 40 [MEMORY VIEWER LIGHT] .........80 button Projector body ................. 23 Remote control .............. 20, 48 Menu item ....................... 50 [MENU LOCK] .................... 78 [MENU LOCK PASSWORD] .........78 Menu navigation .................. 48 button Remote control .............. 20, 42 N [NAME CHANGE] ................. 80 Navigating through the menu ........48 Network connections ...............88 [NETWORK/USB] ..............51, 80 [NOISE REDUCTION] .............54 Notes on Using Wireless Connection ..15 Number ( ~ ) buttons ........ 20 O [ON-SCREEN DISPLAY] ...........63 Optional accessories ...............19 [OTHER FUNCTIONS] .............69 [OVER SCAN] .................... 60 P Preparing the remote control ........24 [P-TIMER] ....................... 67 button Remote control .............. 20, 45 [PASSWORD CHANGE] ............77 [PASSWORD] .................... 77 [PICTURE] ................... 50, 52 [PICTURE MODE] ................ 52 [POSITION] ................... 50, 56 Power button Projector body ................. 23 Remote control ................. 20 Power cord ...................... 34 Precautions for Attaching Ceiling Mount Bracket ........................ 11 7 Precautions for use ................12 Projecting ....................... 40 [PROJECTION METHOD] ..........71 Projector body .................... 21 [PROJECTOR ID] ................. 70 [PROJECTOR SETUP] ..........51, 70 R Read this first! ..................... 4 [REALTIME KEYSTONE] ........... 56 Remote control ................... 20 Remote control operations ..........42 Removing the power cord ...........35 Replace the filter ................. 103 REPLACE THE LAMP UNIT ........103 Resetting adjustment values to the factory default .................... 49 button Remote control ................. 20 [RGB/YP BPR] ..................... 55 S button Remote control .............. 20, 43 [SCREEN ADJUSTMENT] ..........56 [SCREEN SETTING] ..............65 Security ......................... 14 [SECURITY] .................. 51, 77 Selecting the input signal ...........40 terminal Projector body ............. 23, 109 Setting the ID number of the remote control .......................... 46 Setting up ....................... 26 [SHARPNESS] ................... 53 [SHIFT] ......................... 59 [SIGNAL SEARCH] ................66 Specifications ................... 11 4 [STARTUP LOGO] ................ 66 [STATUS] .................... 70, 82 Sub-menu ....................... 50 Switching off the projector ...........39 Switching on the projector ...........36 [SXGA MODE] ................... 67 T Temperature indicator .............101 [TEST PATTERN] ................. 75 [TEXT CHANGE] ................. 78 [TEXT DISPLAY] .................. 78 [TINT] .......................... 53 Troubleshooting ................. 107 [TV-SYSTEM] .................... 55 V button Remote control .............. 20, 40 terminal .............. 23 terminal ..... 23 / button Remote control .............. 20, 42 W Web control function ...............91 [WIDE MODE] .................... 67 button Remote control .............. 20, 40
M0916JQ0 -CH Panasonic Corporation Web S ite : h ttp://panas onic.net/a vc/projector/ © Panas onic Corporat ion 2016 Release Date : September 2016